DLA MS75093 REV B-2013 ADAPTER CONNECTOR SERIES BNC SOCKET CONTACT TO GR-874 HERMORPHRODITIC.pdf

《DLA MS75093 REV B-2013 ADAPTER CONNECTOR SERIES BNC SOCKET CONTACT TO GR-874 HERMORPHRODITIC.pdf》由会员分享，可在线阅读，更多相关《DLA MS75093 REV B-2013 ADAPTER CONNECTOR SERIES BNC SOCKET CONTACT TO GR-874 HERMORPHRODITIC.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 MS75093B 01 August 2013 SUPERSEDING MS75093A 26 July 2006 DETAIL SPECIFICATION SHEET ADAPTER, CONNECTOR, SERIES BNC SOCKET CONTACT TO GR-874 HERMORPHRODITIC This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product

2、 described herein shall consist of this specification sheet and MIL-DTL-27434. FIGURE 1. General configuration, interface dimensions and test pin. AMSC N/A FSC 5935 INCH-POUND Part Identifying Number (PIN) MS75093 Inactive for new design after 15 June 1999. Provided by IHSNot for ResaleNo reproducti

3、on or networking permitted without license from IHS-,-,-MS75093B 2 FIGURE 1. General configuration, interface dimensions and test pin - Continued PIN MS75093-1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS75093B 3 FIGURE 1. General configuration

4、, interface dimensions and test pin - Continued PIN MS75093-2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS75093B 4 FIGURE 1. General configuration, interface dimensions and test pin - Continued PIN MS75093-3 Provided by IHSNot for ResaleNo repr

5、oduction or networking permitted without license from IHS-,-,-MS75093B 5 Inches mm Inches mm Inches mm Inches mm .001 .0015 .003 .004 .005 .006 .009 .010 .011 .014 .015 .023 .026 .030 0.03 0.04 0.08 0.10 0.13 0.15 0.23 0.25 0.28 0.36 0.38 0.58 0.66 0.76 .031 .04 .046 .051 .052 .059 .0595 .0625 .063

6、.068 .070 .072 .085 .090 0.79 1.0 1.17 1.30 1.32 1.50 1.51 1.59 1.60 1.73 1.78 1.83 2.16 2.29 .094 .12 .125 .1623 .1750 .184 .190 .200 .248 .250 .252 .260 280 .288 2.39 3.05 3.17 4.12 4.45 4.67 4.83 5.08 6.30 6.35 6.40 6.60 7.11 7.32 .290 .339 .44 .500 .563 .619 .630 .639 .640 .645 .662 .674 .81 1.5

7、6 7.37 8.61 11.18 12.70 14.30 15.72 16.00 16.23 16.26 16.38 16.81 17.12 20.57 39.62 NOTES: 1. To be concentric to center line within .003 inch. 2. Piece is symmetrical about center line 1 and center line 2. 3. Unless otherwise specified tolerances are .005 inch and 30 (angle). 4. Dimensions are in i

8、nches. 5. Metric equivalents are given for information only. 6. For design purposes this specification takes precedence over procurement documents referenced herein. 7. Referenced documents are DESC drawings. 8. Series BNC socket contact shall be in accordance with MIL-STD 348. 9. GR-874 interface s

9、hall be in accordance with this specification. FIGURE 1. General configuration, interface dimensions and test pin - Continued Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS75093B 6 Engineering Information: Frequency range: DC to 3 GHz. Impedance:

10、 50 ohms. Voltage rating: 100 volts peak. Applicable drawings Requirements: Dimensions and configuration shall be specified on figure 1. All metal parts shall be free from chips, burrs and scratches in accordance with best commercial practices. Insulators shall be in accordance with ASTM D1710. Conn

11、ector body, outer contact and coupling nut shall be brass in accordance with ASTM B16/B16M and nickel plated a minimum of 200 inches in accordance with SAE-AMS-QQ-N-290. BNC connector body and contact shall be silver plated 200 inches, minimum in accordance with ASTM B700. Contacts shall be Berylliu

12、m copper in accordance with ASTM B196/B196M Corrosion: In accordance with test procedure EIA/ECA 364-26, test condition B. Part or Identifying Number (PIN): MS75093 and MS75093-1 through -3 (See figure 1). Quantity Description Drawing or MS 1 1 1 1 1 1 1 1 Outer conductor Inner conductor Insulator C

13、ontact, Inner Coupling nut Retaining ring Socket body Insulation bead 68015 68016 68018 68019 68020 68021 68022 69001 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS75093B 7 Marginal notations are not used in this revision to identify changes with

14、 respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-27434, this document references the following: DESC drawing 68015 DESC drawing 68016 DESC drawing 68018 DESC drawing 68019 DESC drawing 68020 DESC drawing 68021 DESC drawing 68022 DESC drawi

15、ng 69001 MIL-STD-348 ASTM B16/B16M ASTM B196/B196M ASTM B700 ASTM D1710 SAE-AMS-QQ-N-290 EIA/ECA 364-26 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy EC Air Force 85 (Project 5935-2013-157) DLA CC Review activities: Army AR, AT, AV, CR4, MI Navy AS, CG, MC, OS Air Force - 1

16、9 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-