BS ISO 15143-1-2010 Earth-moving machinery and mobile road construction machinery Worksite data exchange System architecture《运土机械和移动式筑路机械 工地数据交换 系统架构》.pdf

《BS ISO 15143-1-2010 Earth-moving machinery and mobile road construction machinery Worksite data exchange System architecture《运土机械和移动式筑路机械 工地数据交换 系统架构》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 15143-1-2010 Earth-moving machinery and mobile road construction machinery Worksite data exchange System architecture《运土机械和移动式筑路机械 工地数据交换 系统架构》.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 15143-1:2010Earth-moving machinery andmobile road constructionmachinery Worksite dataexchangePart 1: System architectureBS ISO 15143-1:2010 BRITISH STANDARDNational forewo

2、rdThis British Standard is the UK implementation of ISO 15143-1:2010.The UK participation in its preparation was entrusted to TechnicalCommittee B/513/1, Earth moving machinery (International).A list of organizations represented on this committee can beobtained on request to its secretary.This publi

3、cation does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 58886 0ICS 35.240.99; 53.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under

4、 the authority of theStandards Policy and Strategy Committee on 31 October 2010.Amendments issued since publicationDate Text affectedBS ISO 15143-1:2010Reference numberISO 15143-1:2010(E)ISO 2010INTERNATIONAL STANDARD ISO15143-1First edition2010-08-01Earth-moving machinery and mobile road constructi

5、on machinery Worksite data exchange Part 1: System architecture Engins de terrassement et machines mobiles de construction de routes change de donnes sur le chantier Partie 1: Architecture du systme BS ISO 15143-1:2010ISO 15143-1:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. I

6、n accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Ad

7、obes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized fo

8、r printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2010 All rights reserved. Unless ot

9、herwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyri

10、ght office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reservedBS ISO 15143-1:2010ISO 15143-1:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1

11、Scope1 2 Normative references2 3 Terms and definitions .3 3.1 General terms relating to information processing.3 3.2 Terms specific to worksite data exchange .8 3.3 Terms relating to specification and standardization of data elements .13 3.4 Terms relating to generalized schema for worksite data exc

12、hange 19 4 Target services 21 5 Method of data exchange in worksite using this part of ISO 15143.22 5.1 Principle22 5.2 Data exchange procedure.22 5.3 Application .23 6 Generalized schema for worksite data exchange 23 6.1 Concept of generalized schema for worksite data exchange.23 6.2 Function of ge

13、neralized schema for worksite data exchange23 6.3 Description of generalized schema for worksite data exchange .24 Annex A (normative) Extensions to the ISO 15143 application schema and data dictionary 26 Annex B (informative) Creation of a worksite data dictionary using ISO 15143 28 Annex C (inform

14、ative) Relevant diagrams of generalized schema for worksite data exchange 34 Annex D (informative) ISO 15143 application example Machine construction36 Annex E (informative) Process modelling (conceptual) .50 Annex F (informative) Process modelling (typical examples)53 Bibliography57 BS ISO 15143-1:

15、2010ISO 15143-1:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.

16、 Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Interna

17、tional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Stan

18、dards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subje

19、ct of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15143-1 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 3, Machine characteristics, electrical and electronic systems, operation and maintenance. ISO 1514

20、3 consists of the following parts, under the general title Earth-moving machinery and mobile road construction machinery Worksite data exchange: Part 1: System architecture Part 2: Data dictionary BS ISO 15143-1:2010ISO 15143-1:2010(E) ISO 2010 All rights reserved vIntroduction Rapidly advancing inf

21、ormation technology and measuring technology are being used to develop worksite information systems to support control of the finished form of work performed by machinery used in the construction industry. The introduction of such systems into construction projects, including earth-work and road con

22、struction work, has begun. To use these worksite information systems, it must be possible for data to be easily and reliably exchanged between the machinery, measuring equipment and site information systems. When a construction project supported by a worksite information system begins, the system is

23、 introduced with specifications suited to the machine and the measuring equipment used at the project, and after this system has been used during the limited duration of the project, it is moved to another project. Therefore, an essential condition for the use of such a worksite information system i

24、s that it be possible for the system to exchange electronic data with the construction machine and measuring equipment. In addition, the many concerned parties, which include not only site managers and machine operators, but also companies contracted to execute the work, machine owners, and project

25、owners, must all have the measurement data, completed work data, machine control data, and so on, used and created during a project. Different information systems are also expected to be able to exchange electronic data. Achieving data exchange using such electronic data is hampered by the fact that

26、 the names and definitions of data and data formats normally differ between worksite information systems, construction machines, and measuring equipment in use: a problem that severely obstructs the development and use of worksite information systems. ISO 15143 is intended to resolve the above probl

27、ems and guarantee the interoperability of data. NOTE It includes the definition of data describing the real-time status of a machine in operation. These data are not intended for real time control of the machine (but such use is not prohibited). The benefits of its use include greater freedom for pr

28、oduct developers and users. Manufacturers of construction machinery, measuring equipment and information systems will benefit from the ability to expand the range of their customers and reduce their product development risk by designing products in compliance with ISO 15143, and to lower their costs

29、 by shortening product development periods and establishing more efficient development and maintenance systems. Without this standard it is difficult to connect equipment made by different makers for use in such information systems and system development is an extremely risky undertaking, thus makin

30、g it difficult for manufacturers to begin to sell their products to users of systems made by other manufacturers. Another cause of high costs is the need to continuously employ many technicians to develop and maintain products after delivery, including the introduction of new versions. However, appl

31、ication of ISO 15143 can be counted on to expand the range of customers of all makers by allowing them to develop and sell products that can be linked with systems from other companies. And the development of products that comply with ISO 15143 will achieve great cost savings by allowing each maker

32、to sell products to many users, at the same time as it increases the efficiency of maintenance work. It will benefit contractors by expanding the range of products that they can select and use from a single supplier to many suppliers, lowering costs and improving product quality. Systems development

33、 in the past was characterized by a general absence of competitiveness, because each user could introduce only products that satisfied the specifications of its existing system and had to continue to rely on its developer for maintenance. The application of ISO 15143 will enhance competition between

34、 makers, lowering costs and raising the level of the systems developed. Expanding the use of information systems on worksites will permit the use of new more advanced products equipped with information technology. For manufacturers of construction machinery and measuring equipment, this will expand

35、the market by developing new business opportunities. One example is stakeless earthwork, BS ISO 15143-1:2010ISO 15143-1:2010(E) vi ISO 2010 All rights reservedthe replacement of finishing stakes that indicate the targets of construction machines with support systems that use electronic data to indic

36、ate target positions to operators. Another is the development of construction machinery with automated blade control. Owners of construction projects, including the national government, regional administrations and private sector users will enjoy the benefits of lower construction costs and higher q

37、uality. These benefits will result from greater competition, improved geometrical tolerances, increased data transfer and the precise control of finished products. BS ISO 15143-1:2010INTERNATIONAL STANDARD ISO 15143-1:2010(E) ISO 2010 All rights reserved 1Earth-moving machinery and mobile road const

38、ruction machinery Worksite data exchange Part 1: System architecture 1 Scope This part of ISO 15143 specifies system architecture for the exchange of data related to the use of earth-moving machinery, as defined in ISO 6165, and mobile road construction machinery, as defined in ISO 22242 when used f

39、or work similar to earth-moving, in worksite data-controlled construction operations. It also applies to worksite data exchange for the purpose of services related to machine use (see Clause 4) and gives definitions of terms related to worksite data exchange. It covers only the application layer of

40、the OSI reference model according to ISO/IEC 7498-1, and does not cover the presentation, session, transport, network, data link or physical layers of the model. Specific agreement (selection of applicable specifications, standards, etc.) relating to those layers will therefore be needed if data exc

41、hange is to be facilitated. This part of ISO 15143 is applicable to the following construction worksite data exchanges: a) information exchanged between contractor and site information system (execution phase): 1) information from contractor to site information system, such as basic project data, de

42、sign data, operational conditions; 2) information from site information system to contractor, such as achieved work data, machine working record; b) information exchanged between site information system and construction machine: 1) information from site information system to construction machine, su

43、ch as mission data including target data; 2) information from construction machine to site information system, such as machine working records (productivity) and machine running records (health). c) information exchanged between site information system and measuring equipment: 1) information from si

44、te information system to measuring equipment such as trigger data; 2) information from measuring equipment to site information system such as measurement records including measurement data. It is not applicable to information exchanged between project owner and contractor: information from project o

45、wner to contractor such as project information, drawing designed topographic data and survey data; information from contractor to project owner such as record drawing and record of quality control. BS ISO 15143-1:2010ISO 15143-1:2010(E) 2 ISO 2010 All rights reservedHowever, the possibility of its a

46、pplication to this area is not excluded. See Figure 1. Contractor 2DesignProject specificationOwnerProject informationdrawingRecord drawingRecord of quality controlContractor 1DesignProject specification(a1) Basic project dataDesign data(a2) Achieved work dataMachinery working recordSite Information

47、 System(b1) Mission data(b2)(c1)(c2) MeasurementrecordMeasuringequipmentConstructionmachineScope of standardizationThe term construction machine is used here as a concept. The actual machine may contain measuring equipment and/or a data operation system. Construction machines are intended to be in t

48、he state in which they are delivered by the manufacturer. ISO 15143 applies to open system data exchange and may be applicable to closed systems. See Clause 4 for ISO 15143-applicable services. Figure 1 Information exchange relating to worksite data exchange 2 Normative references The following refe

49、renced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6165, Earth-moving machinery Basic types Identification and terms and definitions ISO/IEC 7498-1, Information technology Open Systems Interconnection Basic Reference Model: The Basic Model ISO/IEC 11179 (all parts), Information technology Metadata registries (MDR) ISO/IEC 19501-1, Informa