DLA MS28041 REV H-2010 INDICATOR TURN AND SLIP 28V DC 1-7 8 INCH DIAL.pdf

《DLA MS28041 REV H-2010 INDICATOR TURN AND SLIP 28V DC 1-7 8 INCH DIAL.pdf》由会员分享，可在线阅读，更多相关《DLA MS28041 REV H-2010 INDICATOR TURN AND SLIP 28V DC 1-7 8 INCH DIAL.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 6610 INCH-POUND MS28041H 24 August 2010 SUPERSEDING MS28041G 11 July 1988 DETAIL SPECIFICATION SHEET INDICATOR, TURN AND SLIP, 28V DC, 1-7/8 INCH DIAL Inactive for new design after 15 March 1996. This specification is approved for use by all Departments and Agencies of the Department of

2、 Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-7627, “Indicator, Turn and Slip, 28V DC“. REQUIREMENTS: This specification implements STANAG 7140. When amendment, revision, or cancellation of this specification is proposed,

3、the preparing activity must coordinate the action with the U.S. National Point of Contact for the international standardization agreement, as identified in the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IH

4、S-,-,-MS28041H 2 MS part no. Sensitivity Ball color Case Color of dial marking MS28041-1 4 min turn Dark Fluorescent MS28041-1A 4 min turn White Lusterless white MS28041-1B 4 min turn Dark Lusterless white MS28041-2 2 min turn Dark Lusterless white MS28041-2A 2 min turn White Hermetical Fluorescent

5、NOTES: 1. All dimensions are in inches. 2. For design feature purposes, this document takes precedence over documents referenced herein. 3. Hermetically sealed case shall be in accordance with MS33638. 4. Hermetically sealed receptacle shall be in accordance with MS33678 10SL-3P. 5. All cases shall

6、be hermetically sealed. 6. Dial and pointer shown for reference only. For additional details, see procurement specification. FIGURE 1. Indicator, turn and slip, 28V DC, 1-7/8 inch dial. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS28041H 3 MS pa

7、rt no. Sensitivity Ball color Case Color of dial marking MS28041-1C 4 min turn Dark Fluorescent MS28041-1D 4 min turn Dark Hermetical Lusterless white NOTES: 1. All dimensions are in inches. 2. For design feature purposes, this document takes precedence over documents referenced herein. 3. Hermetica

8、lly sealed case shall be in accordance with MS33638. 4. All cases shall be hermetically sealed. 5. Hermetically sealed receptacle shall mate with Amphenol 67-06P14-5S or equivalent. 6. Indicator lighting shall be in accordance with MIL-L-25467. 7. Stencil lettering shall utilize insignia white acryl

9、ic lacquer color ANA 601 with silk screen. 8. Dial and pointer shown for reference only. For additional details, see procurement specification. FIGURE 2. Indicator, turn and slip, 28V DC, 1-7/8 inch dial, slanted panel mount. Provided by IHSNot for ResaleNo reproduction or networking permitted witho

10、ut license from IHS-,-,-MS28041H 4 CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - AV Navy - AS Air Force - 99 DLA - GS DLA - GS1 (Project 661

11、0-2010-003) Review Activity: Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-