DLA MS27656 REV E-2012 CONNECTORS RECEPTACLE ELECTRICAL BACK PANEL WALL MOUNTING FLANGE CRIMP TYPE BAYONET COUPLING SERIES I.pdf

《DLA MS27656 REV E-2012 CONNECTORS RECEPTACLE ELECTRICAL BACK PANEL WALL MOUNTING FLANGE CRIMP TYPE BAYONET COUPLING SERIES I.pdf》由会员分享，可在线阅读，更多相关《DLA MS27656 REV E-2012 CONNECTORS RECEPTACLE ELECTRICAL BACK PANEL WALL MOUNTING FLANGE CRIMP TYPE BAYONET COUPLING SERIES I.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 MS27656E 2 February 2012 SUPERSEDING MS27656D 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The

2、 requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, classes E, T and P. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27656E 2 Sh

3、ell size F max K +.015 -.000 L (class E) max see basic L (class P) max see basic L (class T) max see basic M +.000 -.005 P dia +.010 -.005 R BSC S .020 T max 9 .3595 .938 11 .406 1.031 13 .234 .085 .469 .719 .469 .820 .453 1.125 .156 15 .128 .4845 1.219 17 .531 1.312 19 .578 1.438 21 .204 .625 1.562

4、 23 .115 .500 .750 .500 .790 .147 .6875 1.688 .188 25 .193 .750 1.812 FIGURE 1. Receptacle, classes E, T and P - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27656E 3 Inches mm Inches mm Inches mm Inches mm .005 0.13 .193 4.90 .560 14

5、.22 1.125 27.58 .007 0.18 .204 5.18 .578 14.68 1.219 30.96 .010 0.25 .234 5.94 .625 15.88 1.312 33.32 .015 0.38 .3595 9.13 .6875 17.46 1.438 36.53 .020 0.51 .406 10.31 .719 18.26 1.562 39.67 .085 0.79 .453 11.51 .750 19.05 1.688 42.88 .115 2.92 .469 11.91 .790 20.07 1.812 46.02 .128 3.25 .4845 12.31

6、 .820 20.83 .156 3.96 .500 12.70 .938 23.83 .188 4.78 .531 13.49 1.031 26.19 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. The gauge features for GG shall be .010 (0.25 mm) smaller than the MMC

7、 size at basic location. 5. Maximum panel thickness including mounting hardware. FIGURE 1. Receptacle, classes E, T and P - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Mating connectors: MS27467, MS27653 and MS2

8、7661. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27656 T 15 F 18 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions No letter is required for normal. Provided by IHSNot for ResaleNo reproduction or networking permitted

9、without license from IHS-,-,-MS27656E 4 Specification restrictions Navy Army Air Force Class E is inactive for new design. For ground equipment only, class E is inactive for new design. Classes E and P are inactive for new design. Changes from previous issue. Marginal notations are not used in this

10、revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27467 MS27661 MS27653 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC N

11、avy - AS Air Force 85 (Project 59352012-023) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-