DLA MS24572 REV C-1988 INDICATOR - POSITION VARIABLE NOZZLE《可调喷嘴的示位器》.pdf

《DLA MS24572 REV C-1988 INDICATOR - POSITION VARIABLE NOZZLE《可调喷嘴的示位器》.pdf》由会员分享，可在线阅读，更多相关《DLA MS24572 REV C-1988 INDICATOR - POSITION VARIABLE NOZZLE《可调喷嘴的示位器》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、MS PART NUMBER 80 PERCENT 20 THIS INDICATOR MARK DIAL SHALL BE ON THE - AL CENTERLINE IN ACCORDANCE EXCEPT AS SHOWN. BREAK EDGE .O10 RADIUS APPROX H CANCELLED, SUPERSEDED BY-MS 24572-4. -AND MS 24572 -4 PARTS CAN REPLACE THE CANCELLED MS 24572-1 AND MS 24572 -2 RESPECTIVELY. THE CANCELLED MS24572-1

2、AND MS24572-2 PARTS CANNOT ALWAYS REPLACE THE 70 ., AND MS24572-4 PARTS AND SHOULD BE USED UNTIL EmxK IS DEPLETED. USE ONLY THE SUPERSEDING MS PARTS OF THE SAME DASH NUMBERS FOR DESIGN AND REPLACEMENT. o DIMENSIONS IN INCHES. FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDENCE OVER PROCUREME

3、NT DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID. MILITARY STANDARD AREL-TI IflTERNATIONAL TITLE INTEREST u, Ciil INDICATOR - POSITION b VARIABLE NOZZLE MS 24572 (USAF) MFO(K;L-z9 I OF I OCUREUENT SHEET 111-1- 27191 SPECIFICATION SUPERSEDES: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-