DLA MIL-PRF-64266 11 A-2012 CONNECTORS FIBER OPTIC CIRCULAR RECEPTACLE STYLE MULTIPLE REMOVABLE TERMINI DUST COVER SCREW THREADS ENVIRONMENT RESISTING.pdf

《DLA MIL-PRF-64266 11 A-2012 CONNECTORS FIBER OPTIC CIRCULAR RECEPTACLE STYLE MULTIPLE REMOVABLE TERMINI DUST COVER SCREW THREADS ENVIRONMENT RESISTING.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-64266 11 A-2012 CONNECTORS FIBER OPTIC CIRCULAR RECEPTACLE STYLE MULTIPLE REMOVABLE TERMINI DUST COVER SCREW THREADS ENVIRONMENT RESISTING.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 MIL-PRF-64266/11A 10 January 2012 SUPERSEDING MIL-PRF-64266/11 25 November 2008 PERFORMANCE SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, CIRCULAR, RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, DUST COVER, SCREW THREADS, ENVIRONMENT RESISTING This specification is approved for use by all Departments

2、 and Agencies of the Department of Defense. The requirements for acquiring fiber optic connectors described herein shall consist of this specification sheet and MIL-PRF-64266. Dust covers for MIL-PRF-64266 plugs shall be in accordance with MIL-PRF-64266/10. FIGURE 1. Receptacle dust cover. AMSC N/A

3、FSC 6060 INCH-POUND Inches mm .015 .38 .135 3.43 .593 15.06 .780 19.81 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-64266/11A 2 Shell size U thread Class 2A A dia max B dia C max Inches Mm Inches mm Inches mm 11 .750-.1P- .2L-D.S. 1.028 26

4、.11 .900 .880 22.86 22.35 1.800 45.72 13 .875-.1P- .2L-D.S. 1.141 28.98 1.025 1.005 26.03 25.53 1.950 49.53 15 1.062-.1P- .2L-D.S. 1.263 32.08 1.215 1.195 30.86 30.35 2.050 52.07 23 1.500-.1P- .2L-D.S. 1.705 43.26 1.650 1.630 41.91 41.40 2.690 68.33 NOTES: 1. Dimensions are in inches. 2. Metric equi

5、valents are given for general information only. 3. Dimensions apply to plated/finished part. 4. The connector receptacle interface dimensions shall be in accordance with figure A-2 of MIL-PRF-64266. FIGURE 1. Receptacle dust cover - Continued. REQUIREMENTS: Dimensions and configurations: See figure

6、1 herein and MIL-PRF-64266, figure A-2. Weight: Weight shall not exceed the specified value in table I for the applicable shell size. Weight includes lanyard and ring. TABLE I. Dust cover weights. Shell size Composite Aluminum Stainless steel ounces grams ounces grams ounces grams 11 0.32 9.0 0.49 1

7、4.0 1.45 41.0 13 0.35 10.0 0.56 16.0 1.62 46.0 15 0.42 12.0 0.74 21.0 2.01 57.0 23 0.63 18.0 1.06 30.0 3.17 90.0 Qualification: Qualification shall consist of performing testing specified as listed in table II. The tests in this initial qualification table are applicable when performed only for the

8、dust covers. When testing the connector plug and connector receptacle, the dust cover shall be included as part of the initial qualification of these components and not tested separately. In either case, the dust cover shall meet the requirements for the same inspections as listed in table II. Provi

9、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-64266/11A 3 Table II. Qualification inspections Test performed 7/, 11/ Initial qualification For change in Seal material Sealing integrity Plating Shell size Lanyard 1/ 2/ 3/ 4/ 5/ 6/ GROUP 1 (6 mate

10、d pairs) Interoperability (not applicable) Visual & Mechanical Size X X X Weight X X X Identification marking X X X Screw threads X X Workmanship X X X X X X Functional Connector coupling engagement and disengagement torque X X X X X Dust cover mating durability X X X X Connector coupling engagement

11、 and disengagement torque X X X X Water pressure 14/ X X X X Optical None GROUP 2 (2 mated pairs) Backshell-to-connector mating torque Cable pull out force (retention) External bending moment Cable seal flexing Twist Impact X X X Crush X X X Vibration: Swept sine Vibration: Random Shock: MIL-S-901 1

12、2/ X X Water pressure 14/ X X Modified SO2/salt spray X X X X X Connector coupling engagement and disengagement torque X X X X GROUP 3 (2 mated pairs) Thermal shock X X X X Temperature/humidity cycling Temperature cycling Life aging X X X X Freezing water Sand & dust X X X X Identification marking X

13、 X X Connector coupling engagement and disengagement torque X X X X Water pressure 14/ X X X X Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-64266/11A 4 Table II. Qualification inspections Continued. Test performed 7/, 11/ Initial For chang

14、e in qualification Seal material Sealing integrity Plating Shell size Lanyard 1/ 2/ 3/ 4/ 5/ 6/ GROUP 4 (2 mated pair + parts) 7/ Electromagnetic effects (2 mated pair) 9/, 13/ X X Fluid immersion (2 mated pair) X X X X Shell to shell conductivity (initial) X X Salt spray (2 mated pair) 8/ X X X She

15、ll to shell conductivity (post salt spray) X X Connector coupling engagement and disengagement torque X X X Flammability (1 mated pair) Fungus resistance (parts) 10/ X X X Ozone exposure (parts) 10/ X X X 1/ Test sample configuration. Unless otherwise specified, the connector plug dust cover shall b

16、e mated to the connector receptacle dust cover for each of the tests/inspections. When testing the connector plug and connector receptacle as part of the initial qualification, one end of each dust cover lanyard shall be affixed to the connector. 2/ Seal material. Tests in this column may be exclude

17、d if other components that use the same seal material are qualified to this defense specification. 3/ Seal integrity. These tests verify the sealing integrity, verify aspects unique to the dust cover configuration, and so shall be performed as part of a dust cover qualification for a change in seal

18、material or dust cover design. 4/ Plating. Tests in this column other than those for group 1 visual and mechanical inspection may be excluded if other components that use the same plating are qualified to this defense specification with one provision: The other components must contain the same knurl

19、 or other style gripping surface as dust covers being qualified. 5/ Shell size. With the exception of those tests listed in group 1, tests in this column can be excluded for smaller shell sizes once dust covers for larger shell sizes are qualified to this defense specification. 6/ Lanyard attachment

20、. Lanyard attachment shall consist of a coated stainless steel wire rope with ring. This column applies when a material or configuration (such as attachment method to dust cover) is changed. 7/ Group 1 mated pair are to be used for Groups 2 and 3 tests. Group 4 may be performed before Group 1, and,

21、except for electromagnetic effects, with separate samples. 8/ Salt spray. Two options: a. Use same two mated pair from the fluid immersion test. b. Use separate mated pair. 9/ Electromagnetic effects. Two (2) mated pair from the fluid immersion, salt spray, or Group 2/3 samples after that Groups tes

22、t completion may be used. 10/ Parts only, assembly not required. 11/ Specific test practices for physical, mechanical, environmental and material tests, including clarifications and further details, are found in MIL-STD-1678-3. 12/ Shock test. Mated dust covers shall be affixed to standard shock fix

23、ture 4A for bulkhead mounting in the same manner as the dust covers are affixed to the connector. There shall be no damage or loosening of parts and mated dust covers shall not become a missile hazard. 13/ For receptacle dust cover only. Two of the six mated pair from Group 1 shall be used. Test sam

24、ple configuration shall consist of a receptacle dust cover mated to a connector receptacle. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-64266/11A 5 Table II. Qualification inspections Continued. 14/ Water pressure. When test is performed

25、with a dust cover mated to a connector and the dust cover is removed for the post test water penetration inspection, orient the connector so that it is facing away from the center of the earth. This orientation will prevent water that may have penetrated threads prior to seals from entering the conn

26、ector (resulting in a false positive for water penetration). Maintenance aging: Not applicable. Twist: Not applicable. Mating durability: Not applicable. Dust cover mating durability: Dust covers shall be mated then de-mated for 500 cycles to the applicable connector plug or connector receptacle. Du

27、st cover seals shall not be rendered unfit for sealing (as determined by no wear, no displacement, and no penetration after the succeeding water pressure test). Threads shall not exhibit signs of wear. Plating shall remain intact to extent that dust cover can be mated and de-mated after performance

28、of sand and dust and after salt spray. Water pressure: Applicable except immerse in fresh water to equivalent depth of 3 feet (0.9 m) for a period of 30 minutes. Next, the dust covers shall be removed, externally cleaned and dried, and visually examined for water penetration into each dust cover. No

29、 water penetration past the sealed surfaces of the dust cover interior shall occur. Gasket: Gasket shall be bonded to cover or mechanically retained. Lanyard: Lanyard shall be free to rotate on fastener affixed to dust cover. A fastener shall be affixed to other end of lanyard for dust covers to be

30、used with wall mounting receptacles. A ring shall be affixed to other end of lanyard for dust covers to be used with jamnut mounting receptacles. Lanyard attachment shall consist of a coated stainless steel wire rope with ring. Provided by IHSNot for ResaleNo reproduction or networking permitted wit

31、hout license from IHS-,-,-MIL-PRF-64266/11A 6 Marking: Part or Identification Number (PIN): Marked dust cover. M64266/11 X X X Basic PIN Shell size designator letter B = Shell size 11 C = Shell size 13 D = Shell size 15 H = Shell size 23 Material designator letter A = Aluminum with cadmium electroly

32、tic compatible plating B = Composite with cadmium electrolytic compatible plating C = Stainless steel, passivated Lanyard attachment designator letter 1 = Lanyard with fastener (for wall mounting receptacle) 2 = Lanyard with ring (for jamnut mounting receptacle) PIN example: M64266/11BA1 Changes fro

33、m previous issue: The margins of this specification sheet are marked with vertical lines to indicate where changes from the previous issue were made. This is done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors

34、 are cautioned to evaluate the requirements of the document based on the entire contents irrespective of the marginal notation and relationship to the last previous issue. Referenced documents. In addition to MIL-PRF-64266, this specification sheet references the following documents: MIL-S-901 MIL-S

35、TD-1678-3 MIL-PRF-64266/10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-64266/11A 7 Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 6060-2011-011) DLA - CC Review activities: Army - MI Navy - AS Air For

36、ce - 13, 19, 93, 99 NASA - NA NOTE: The activities listed above were interested in this document on the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-