DLA MIL-PRF-22885 15E-2001 SWITCH PUSH BUTTON ILLUMINATED 4-LAMP CLIP MOUNTED (MODULAR CONSTRUCTED).pdf

《DLA MIL-PRF-22885 15E-2001 SWITCH PUSH BUTTON ILLUMINATED 4-LAMP CLIP MOUNTED (MODULAR CONSTRUCTED).pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-22885 15E-2001 SWITCH PUSH BUTTON ILLUMINATED 4-LAMP CLIP MOUNTED (MODULAR CONSTRUCTED).pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、I INCH POUND MI L-PRF-22885/15E 1 March2001 SUPERSEDING 25 April 1975 MI L-PRF-22885/15D PERFORMANCE SPECIFICATION SHEET SWITCH, PUSH BUTTON, ILLUMINATED, 4-LAMP, CLIP MOUNTED (MODULAR CONSTRUCTED) This specification sheet is approved for use by all Departments and Agencies of the Department of Defe

2、nse. The requirements for acquiring the indicator lights described herein shall consist of this specification sheet and MIL-PRF-22885. SPRING CLIP SEE NOTE 8 : : SEE NOTE 8 MIL-PRF-22885/11 SWITCH MODULE CONFIGURATION A CONFIGURATION B NOTES: 1. Dimensions are in inches. 2. Unless otherwise specifie

3、d, tolerances are f.016 (.41 mm) and f.02 (51 mm). 3. The design configuration is optional within envelope dimensions shown. 4. Terminal design is optional. 5. Metric equivalents (to the nearest .O1 mm) are given for general information only. 6. Switch clip design optional - must interface with MIL-

4、PRF-22885/11 switch modules. FIGURE 1. Switch. push. illuminated. 4-lamp clip mounted (modular constructed). AMSC N/A Page 1 of 6 FSC 5930 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without li

5、cense from IHS-,-,-M IL-PRF-22885/15E 1 L 1.1004 1.100&1.095 MOUNTING FOR CONFIGURATION A SEE NOTE 5 I I I I _- L1.2404 HOUNTING FOR CONFIGURATION B Inches mm .160 4.06 .855 21.72 .860 21.84 1 .o00 25.40 1 .O95 27.81 1.100 27.94 1.240 31 50 NOTES: 1. Dimensions are in inches. 2. Tolerance is + .O10

6、(.25 mm), -.O00 (OOmm). 3. Metric equivalents (to the nearest .O1 mm) are given for general information only. 4. This is the separation of cutout when matrix mounting. 5. Add for each additional unit. FIGURE 2. Recommended panel cutouts. 2 Provided by IHSNot for ResaleNo reproduction or networking p

7、ermitted without license from IHS-,-,-M IL-PRF-22885/15E REQUIREMENTS Dimensions and configuration: See figures 1 and table II. Complete switch shall consist of: 1 - Modular indicator light (MIL-PRF-22885/16). 1 - Switch assembly (MIL-PRF-22885/11). 4 - Color filters (MIL-PRF-22885/12), when specifi

8、ed (see table Il). 4 - Lamps (T-l-3/4 midget-flange base incandescent type) not included, order separately. Weight: 235 pound maximum. Enclosure design: 1 (unsealed). Vibration grade: 2 (10 to 500 Hz). Display type: W (White backgrund). Shock: (specified pulse): Method 213 of MIL-STD-202, test condi

9、tion A (50g). Thermal shock: Maximum temperature shall be -55C. Part number: M22885/15- (dash number from table Il). Qualification inspection: All applicants for qualification approval shall demonstrate that each of their items conform to all the requirements specified in the applicable documents, s

10、ingularly and in combination with all other previously qualified items, regardless of manufacturer. (a) When the basic sensitive switches are qualified to MIL-PRF-8805, switches shall be tested in accordance with table I. (b) When the basic sensitive switches are not qualified to MIL-PRF-8805, the s

11、witch type for which qualification is sought, shall be submitted to the complete tests in accordance with table X of MIL- PRF-22885. The sample switches submitted to the color and luminance test, group VIII shall also be subjected to the color fade test in MIL-PRF-22885/12. Group A inspection: Tests

12、 may be performed on individual MIL-PRF-22885/11 and MIL-PRF-22885/16 units prior to assembly as a MIL-PRF-15 unit, when applicable. Contact resistance may be performed on individual MIL-PRF-8805/2 basic switches prior to assembly as MIL-PRF-22885/11 unit. 3 Provided by IHSNot for ResaleNo reproduct

13、ion or networking permitted without license from IHS-,-,-M IL-PRF-22885/15E Part number M22885115 -02 -36 -20 - 41 TABLE I. Qualification inspection (group submission). Qualification inspection table of Additional Extent of approval MIL-PRF-22885 testing Group No. of sample units I 4 II 2 (From grou

14、p i) Plunger stop test 21 III 2 (From group i) I 4 VI 31 4 (From group i) MI L-PRF-22885115, I 2 II 31 I1 6, I1 1, I1 2 2 (from group i) Color fade test of VIII 10 M IL-PRF-22885112 Dash number 11 21 o 1 (XXXX) 02(XXXX) 03(XXXX) - 1/ In addition to those tests specified, switch modules M22885/11-O1

15、and -03 shall be subjected to visual and mechanical examination and operating characteristics testing utilizing MIL-PRF-22885/16 indicator modules (2 samples each). - 2/ The plunger stop test of MIL-PRF-22885/16 shall be performed by removing the switch assembly and installing the stop. - 3/ Sea lev

16、el resistive loads only. - 4/ Two sample units for each color (4 lamps per sample unit). Samples from groups II thru VI1 may be used. Indicator M22885116- Switch module module M22885111- o 1 (XXXX) 01 o 1 (XXXX) 02 o 1 (XXXX) 03 04(XXXX) o 1 (XXXX) 04 06(XXXX) 08(XXXX) 07(XXXX) 09(XXXX) 1 O(XXXX) 1

17、1 (XXXX) 05(XXXX) 05(XXXX) 05(XXXX) 07(XXXX) 07(XXXX) 07(XXXX) 05(XXXX) 01 12(XXXX) 14(XXXX) 15(XXXX) 17(XXXX) 19(XXXX) 1 6(XXXX) 18(XXXX) 07(XXXX) 04 09(XXXX) 09(XXXX) o9 XXXX 4 1 1 (XXXX) 13(XXXX) 09(XXXX) 01 2O(XXXX) 02 03 04 1 1 (XXXX) 04 4 2 1 (XXXX) 13(XXXX) 01 22(XXXX) 23(XXXX) 24(XXXX) 13(XX

18、XX) 13(XXXX) 13(XXXX) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M IL-PRF-22885/15E TABLE II. Dash number, design, and operating characteristics - Continued. Dash number 1/ 21 25(XXXX) 26(XXXX) 29(XXXX) 3O(XXXX) 33(XXXX) 34(XXXX) 27(XXXX) 28(XXX

19、X) 3 1 (XXXX) 32(XXXX) 35(XXXX) Indicator M22885/16- Switch module module M22885/11- 02(XXXX) 01 02(XXXX) 02 06(XXXX) 01 06(XXXX) 02 OS(XXXX) 01 OS(XXXX) 02 02(XXXX) 03 02(XXXX) 04 06(XXXX) 03 06(XXXX) 04 OS(XXXX) 03 36iXXXXj 38(XXXX) 39(XXXX) 4O(XXXX) 42(XXXX) 43(XXXX) 41 (XXXX) OS(XXXXj 04 1 O(XXX

20、X) 1 O(XXXX) 10 XXXX 4 12(XXXX) 37(XXXX) 1 O(XXXX) 01 44ixxxxj i 2ixxxxj 04 45(XXXX) - 1/ Dash numbers shown are for units without color filters. When color filters are required, add the color symbols of MIL-PRF-22885 in place of “(XXXX)” with location as shown on figure 3 of MIL-PRF-22885/16.Exampl

21、e: M22885/15-07RGGR. numbers that contained an additional zero. - 2/ Dash numbers are interchangeable with and replace former dash 5 14(XXXX) 01 46(XXXX) 49(XXXX) 5O(XXXX) 53(XXXX) 54(XXXX) 57(XXXX) 58(XXXX) 47(XXXX) 48(XXXX) 5 1 (XXXX) 52(XXXX) 55(XXXX) 56(XXXX) 59(XXXX) 14(XXXX) 02 15(XXXX) 01 15(

22、XXXX) 02 17(XXXX) 01 17(XXXX) 02 19(XXXX) 01 19(XXXX) 02 14(XXXX) 03 14(XXXX) 04 15(XXXX) 03 15(XXXX) 04 17(XXXX) 03 17(XXXX) 04 19(XXXX) 03 6oxxxxj i gixxxxj 04 6 1 (XXXX) 1 6(XXXX) 01 62(XXXX) 65(XXXX) 66(XXXX) 69(XXXX) 7O(XXXX) 63(XXXX) 64(XXXX) 67(XXXX) 68(XXXX) 71 (XXXX) 72(XXXX) 1 6(XXXX) 02 l

23、S(XXXX) 01 lS(XXXX) 02 2O(XXXX) 01 2O(XXXX) 02 1 6(XXXX) 03 1 6(XXXX) 04 lS(XXXX) 03 1 SXXXX) 04 2O(XXXX) 03 2O(XXXX) 04 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M IL-PRF-22885/15E NOTE: For other than direct Government stocking, procurement o

24、f complete units may be made from the dash numbers indicated in table II. The part number shall not appear on the items, but may be marked on shipping containers. The individual part numbers as specified in MIL-PRF-22885/11, /12, and /16, when applicable, shall be marked as required. Custodians: Army - CR Navy - EC Air Force - 11 DLA - CC Preparing activity: DLA - CC (Project 5930-1 716-03) Review activities: Army - AR, AT, AV, MI Navy - AS, MC, OS, SH Air Force - 19, 99 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-