DLA MIL-PRF-1 275E-2004 ELECTRON TUBE CATHODE RAY TYPES 5LP1A 5LP5A 5LP7A AND 5LP11A.pdf

《DLA MIL-PRF-1 275E-2004 ELECTRON TUBE CATHODE RAY TYPES 5LP1A 5LP5A 5LP7A AND 5LP11A.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-1 275E-2004 ELECTRON TUBE CATHODE RAY TYPES 5LP1A 5LP5A 5LP7A AND 5LP11A.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、INCH POUND MIL-PRF-1/275E 6 August 2004 SUPERSEDING MIL-PRF-1/275D 31 March, 1999 PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, CATHODE RAY TYPES 5LP1A, 5LP5A, 5LP7A, AND 5LP11A This specification is approved for use by all Depart- ments and Agencies of the Department of Defense. The requirements f

2、or acquiring the electron tube described herein shall consist of this document and the latest issue of MIL-PRF-1. DESCRIPTION: Electrostatic deflection and focus. DIMENSIONS AND PIN CONNECTIONS: See figure 1. ABSOLUTE RATINGS: Parameter: Ef Ec1 ed Eb1 Eb2 Eb3 Unit: V V dc v V dc V dc V dc Maximum: 6

3、.9 0 550 1,100 2,200 4,400 Minimum: 5.7 -125 - - - - - - 1,100 1,100 Parameter: Rg Zd Eb3/Eb2 Alt Unit: Meg Meg Ratio ftMaximum: 1.5 1.0 2 10,000 Minimum: - - - - - - - - - - - - Test conditions: Parameter: Ef Ec1 ed Eb1 Eb2 Eb3 Unit: V V dc v V dc V dc V dc P1A, P5A, P11A: 6.3 Adj - - - Focus 1,500

4、 3,000 P7A: 6.3 Adj - - - Focus 2,000 4,000 _ GENERAL: Qualification - Required. AMSC N/A FSC 5960 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MIL-PRF-1/275E 2TABLE I. Testing and inspection. Inspection Method MIL-STD-1311 Type Notes Conditions Sym

5、bol Limits Min Limits Max Unit Conformance inspection, part 1 Bulb, screen, and faceplate quality Voltage breakdown Voltage breakdown (electrostatic types) Light output Spot position (electrostatic deflection) Spot displacement (leakage) Modulation Grid cutoff voltage Grid No. 1 leakage current Anod

6、e No. 2 leakage current Gas “cross” 5106 5201 5201 5221 5231 5231 5223 5241 5251 5251 5206 All All All P1A P5A P11A All All P1A P5A P7A P11A P1A, P5A, P11A All All P1A P5A P7A P11A - - - - - - - - - - - - 3 3 - - - - - - - - - 3 - - - 3 - - - - - - - - - - - - 3 - - - 3 Light = 4.0 fL Light = 0.65 f

7、L Ib3 = 10A dc Light = 2.0 fL Light = 4.0 fL Light = 0.65 fL Ib3 = 10A dc Light = 2.0 fL - - - - - - - - - Light Light Light - - - Displ Ec1 Ec1 Ec1 Ec1 Ec1 - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.0 0.65 2.0 - - - - - - - - - - - - - - - - - - -22.5 - - - - - - - - - - - - - - - - -

8、- - - - - - - - - - - - - - - - - - - 20 5 35 35 45 35 -67.5 - - - - - - - - - - - - - - - - - - - - - - - - - - - fL fL fL mm mm V dc V dc V dc V dc V dc - - - - - - - - - - - - - - - - - - Conformance inspection, part 2 Side terminal and base alignment Base alignment (electrostatic types) Neck and

9、 base alignment (electrostatic types) 5101 5101 5101 All All All - - - - - - - - - 4D3; pin no. 6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MIL-PRF

10、-1/275E 3TABLE I. Testing and inspection - Continued. Inspection Method MIL-STD-1311 Type Notes Conditions Symbol Limits Min Limits Max Unit Conformance inspection, part 2, continued Side terminal alignment (electrostatic types) Heater current Angle between traces Heater-cathode leakage current Elec

11、trode current (anode No. 1) Electrode current (cathode) Stray light emission (conventional types) Line width “A” (electrostatic deflection) Line with “B” (electrostatic deflection) Deflection factor (1D2) Deflection factor (3D4) Focusing voltage at modulation condition Focusing voltage at cutoff Scr

12、eens Secureness of base, cap, or insert Base pin solder depth Permanence of marking 5101 1301 5101 5251 5201 5201 5216 5226 5226 5248 5248 5246 5246 5221 1101 1111 1105 All All All All All P1A P5A P7A P11A All P1A P5A P7A P11A P1A P5A P7A P11A P1A, P5A, P11A P7A P1A, P5A, P11A P7A P1A, P5A, P11A P7A

13、 P1A, P5A, P11A P7A P7A All All All - - - - - - - - - - - - - - - - - - 3 - - - 3 - - - 1 3 - - - 3 2 3 - - - 3 - - - - - - - - - - - - - - - - - - - - - - - - 3D4 Ec1 = 0 Light = 4.0 fL Light = 0.65 fL Ib3 = A dc Light = 2.0 fL Eb2 = 2,200 V dc Eb3 = 4,400 V dc Light = 4.0 fL Light = 0.65 fL Ib3 =

14、10 A dc Light = 2.0 fL Light = 4.0 fL Light = 0.65 fL Ib3 = 10 A dc Light = 2.0 fL - - - If - - - - - - Ib1 Ik Ik Ik Ik - - - Width Width Width Width Width Width Width Width DF DF DF DF Eb1 Eb1 Eb1 Eb1 - - - - - - - - - - - - - - - 540 - - - - - - -50 - - - - - - - - - - - - - - - - - - - - - - - -

15、- - - - - - - - - - - - - - - 62 82 54 73 282 375 300 400 - - - - - - - - - - - - - - - 660 - - - - - - 10 1,000 1,000 1,000 1,000 - - - 0.6 0.6 0.6 0.6 0.7 0.7 0.7 0.7 93 124 81 109 475 632 450 600 - - - - - - - - - - - - - - - mA - - - - - - A dc A dc A dc A dc A dc - - - mm mm mm mm mm mm mm mm V

16、 dc/in. V dc/in. V dc/in. V dc/in. V dc V dc V dc V dc - - - - - - - - - - - - See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MIL-PRF-1/275E 4TABLE I. Testing and inspection - Continued. Inspection Method MIL-STD-1311 Type N

17、otes Conditions Symbol Limits Min Limits Max Unit Conformance inspection, part 3 Life test Life-test end points: Heater-cathode leakage current Grid No. 1 leakage current Anode No. 2 leakage current Stray light emission (conven-types) Line width “A” Line width “B” Modulation Line width “A” Line widt

18、h “B” Modulation Line width “A” Line width “B” Modulation Line width “A” Line width “B” Modulation Base material insulating quality Cathode illumination Pressure (implosion) Deflection-factor uniformity Direct-interelectrode capacitance Neck and bulb alignment (electrostatic types) Vibration Deflect

19、ion factor (1D2) Deflection factor (3D4) - - - - - - 5251 5251 5251 5216 5226 5226 5223 5226 5226 5223 5226 5226 5223 5226 5226 5223 1216 5216 1141 5248 1331 5101 5111 5248 5248 All P1A P5A P7A P11A All All All All P1A P1A P1A P5A P5A P5A P7A P7A P7A P11A P11A P11A All All All All All All All P1A, P

20、5A, P11A P7A P1A, P5A, P11A P7A - - - - - - 3 - - - 3 - - - - - - - - - - - - - - - - - - - - - 3 3 3 - - - - - - - - - 3 3 3 4 4 4 4 4 4 4 4 4 4 4 Group C; Eb2 = 2,200 V dc Eb3 = 4,400 V dc t = 500 hours (min) Light = 4.0 fL Light = .065 fL Ib3 = 10 A dc Light = 2.0 fL Light = 3.0 fL Light = 3.0 fL

21、 Light = 3.0 fL Light = 0.5 fL Light = 0.5 fL Light = 0.5 fL Ib3 = 7.5 A dc Ib3 = 7.5 A dc Ib3 = 7.5A dc Light = 1.5 fL Light = 1.5 fL Light = 1.5 fL Zone 5 (min) g1 to all D1 to D2 D3 to D4 D1 to all D2 to all D3 to all D4 to all Eb3 = Eb2 = 1,500 V dc Eb3 = Eb2 = 2,000 V dc Eb3 = Eb2 = 1,500 V dc

22、Eb3 = Eb2 = 2,000 V dc - - - - - - - - - - - - - - - - - - - - - - - - - - - Width Width Ec1 Width Width Ec1 Width Width Ec1 Width Width Ec1 - - - - - - - - - - - - Cg1 C1D2 C3D4 CD1 CD2 CD3 CD4 Dia Width DF DF DF DF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

23、 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 67 46 61 - - - - - - - - - - - - - - - - - - - - - - - - - - - 0.6 0.7 35 0.6 0.7 35 0.6 0.7 45 0.6 0.7 35 - - - - - - - - - - - - 13.0 3.0 2.5 14.0 14.0 9.0 9.0 1.87 1.0 76 10

24、1 68 91 - - - - - - - - - - - - - - - - - - - - - - - - - - - mm mm V dc mm mm V dc mm mm V dc mm mm V dc - - - - - - - - - - - - pF pF pF pF pF pF pF inch mm V dc/in. V dc/in. V dc/in. V dc/in. See footnotes at top of next page. Provided by IHSNot for ResaleNo reproduction or networking permitted w

25、ithout license from IHS-,-MIL-PRF-1/275E 5TABLE I. Testing and inspection - Continued. NOTES: 1. The deflection plates shall be returned to No. 2 anode through a minimum of 2.5 M resistors. The light output shall be set at 2 fL. The high-frequency scanning shall be applied to the deflecting plates n

26、earest the screen and the amplitude shall be adjusted to give a line length of approximately 90 percent of the maximum tube diameter. The low-frequency scanning amplitude shall be expanded to approximately 90 percent of the maximum tube diameter in the direction perpendicular to the direction of the

27、 high-frequency scanning. Readjustment may be made for best overall focus. The tubes shall be observed for deflection defocusing, astigmatism, or spot ellipticity observable to the eye as evidenced by fuzziness due to lack of sharpness of trace (usually around edges), bow-tying (irregular widths of

28、any single line when observed at different points), bowing of trace other than that normally caused by curvature of bulb. This test for focus is to be made in addition to the line width measurements. 2. The same conditions shall be set up as described in note 1 except that the connection of deflecti

29、ng elements to the low- and high-frequency scanning supplies shall be interchanged and the amplitudes adjusted to 90 percent of the maximum tube diameter in both directions without any adjustment of focus from note 1 conditions. An examination for defocusing, astigmatism, or spot ellipticity shall b

30、e made as in note 1. 3. As measured with a 2x2 inch raster using a type 3 Photronic cell without eye correction, calibrated in foot candles of illumination from a light source having a color temperature of 2,700 K. 4. This test shall be performed during the initial production and once each succeedin

31、g 12-calender months in which there is production. An accept on zero defect sampling plan shall be used, with sample of three tubes with an acceptance number of zero. In the event of failure, the test will be made as a part of conformance inspection, part 2, with an acceptance level of 6.5 (see note

32、 5). The “12-calender month” sampling plan shall be reinstated after three consecutive samples have been accepted. 5. This specification sheet uses accept on zero defect sampling in accordance with MIL-PRF-1, table III. Provided by IHSNot for ResaleNo reproduction or networking permitted without lic

33、ense from IHS-,-MIL-PRF-1/275E 6NOTES: 1. Metric equivalents (to the nearest .01 mm) are given for general information only. 2. Useful screen radius. 3. Reference dimensions are provided for information only and are not required for inspection purposes. FIGURE 1. Outline drawing of electron tube typ

34、es 5LP1A, 5LP5A, 5LP7A, AND 5LP11A . Dimensions (See note 1) Ltr Inches Millimeter Min Max Min Max Conformance inspection, part 2 A 5.250 5.375 133.35 136.53 B 2.250 57.15 C 1.562 1.688 39.67 42.88 D 16.375 17.125 415.93 434.98 F 9.500 241.30 G 1.500 2.000 38.10 50.80 H 3.375 85.73 Conformance inspe

35、ction, part 3 (See note 4) L M Base: B11-66 Bulb contact: C1-1 Reference dimensions (See note 3) E 16.220 411.99 J 10.000 254.00 K .750 R 19.05 R Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MIL-PRF-1/275E 7NOTES Referenced documents. In addition to

36、 MIL-PRF-1, this specification sheet references MIL-STD-1311. Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoe

37、ver for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air

38、 Force - 11 (Project 5960-3710) DLA-CC Review activities: Army - AR Navy - AS, CG, MC, OS Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at www.dodssp.daps.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-