DLA MIL-DTL-83538 9 B-2008 CONNECTORS AND ACCESSORIES ELECTRICAL CIRCULAR UMBILICAL ADAPTER ACCESSORY LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC).pdf

《DLA MIL-DTL-83538 9 B-2008 CONNECTORS AND ACCESSORIES ELECTRICAL CIRCULAR UMBILICAL ADAPTER ACCESSORY LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC).pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-83538 9 B-2008 CONNECTORS AND ACCESSORIES ELECTRICAL CIRCULAR UMBILICAL ADAPTER ACCESSORY LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC).pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 METRICMIL-DTL-83538/9B 2 June 2008 SUPERSEDING MIL-DTL-83538/9A 24 December 1998 DETAIL SPECIFICATION SHEET CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ADAPTER, ACCESSORY, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) This specification is approved for use by all Depar

2、tments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83538. FIGURE 1. Accessory adapter launcher receptacle. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking per

3、mitted without license from IHS-,-,-MIL-DTL-83538/9B 2 Accessory shell size A Accessory thread Accessory thread torque (newton-meters) B dia 0.13 (.005) (inch equivalents in parentheses) C number of teeth 09 M12x1.0-6g 0.100R 11.3 1.1 8.18 (.332) 12 11 M15x1.0-6g 0.100R 11.3 1.1 11.18 (.440) 16 13 M

4、18x1.0-6g 0.100R 17.0 1.7 14.20 (.559) 20 15 M22x1.0-6g 0.100R 17.0 1.7 18.19 (.716) 24 17 M25x1.0-6g 0.100R 22.6 2.3 21.18 (.834) 28 19 M28x1.0-6g 0.100R 22.6 2.3 24.18 (.952) 32 21 M31x1.0-6g 0.100R 28.3 2.8 27.18 (1.070) 36 23 M34x1.0-6g 0.100R 28.3 2.8 30.18 (1.188) 40 mm Inches mm Inches mm Inc

5、hes mm Inches 0.64 0.025 3.56 0.140 5.21 0.205 34.67 1.365 0.89 0.035 3.68 0.145 11.81 0.465 34.93 1.375 0.100 0.004 3.81 0.150 12.32 0.485 37.84 1.489 1.00 0.04 4.95 0.195 28.58 1.125 38.04 1.497 3.18 0.125 NOTES: 1. Dimensions are in millimeters. 2. Inch equivalents are given for information only.

6、 FIGURE 1. Accessory adapter launcher receptacle - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83538/9B 3 REQUIREMENTS: Dimensions and configurations: See figure 1. This accessory adapter mates with MIL-DTL-83538/4. Part or Ide

7、ntifying Number (PIN) example: M83538/9 -09 Specification sheet number Accessory shell size QUALIFICATION: This adapter shall be in accordance with the requirements of MIL-DTL-83538. The following details and exceptions shall apply: Group A: Visual and mechanical examination (100% inspection). Group

8、 B: Not Applicable. Qualification and group C: Two test samples consisting of two MIL-DTL-83538/9 adapters and two MIL-DTL-83538/4 mating connectors shall be required for stand alone qualification. However, if the manufacturer is in the process of qualifying MIL-DTL-83538/4, then one test sample is

9、required. Testing shall be performed in the following sequence: Visual and mechanical examination. Salt spray followed by accessory thread strength. Manufacturers that are qualifying this adapter cover as a stand alone accessory shall conduct salt spray, accessory thread strength and post test exami

10、nation in accordance with MIL-DTL-83538. For initial qualification, manufacturers that are qualifying MIL-DTL-83538/4 receptacles concurrently with MIL-DTL-83538/9 adapter covers shall supply an adapter and connector pair and perform testing in accordance with the qualification requirements and test

11、 sequence of MIL-DTL-83538/4. For group C, twenty-four month periodic testing, one MIL-DTL-83538/9 adapter and one MIL-DTL-83538/4 receptacle shall be required. Testing shall consist of visual and mechanical, salt spray, accessory thread strength and post test examination. Changes from the previous

12、issue: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83538, this document references the following: MIL-DTL-83538/4 MIL-STD-1760 Provided by IHSNot for ResaleNo re

13、production or networking permitted without license from IHS-,-,-MIL-DTL-83538/9B 4 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force 85 DLA CC Review activities: Army AR, MI Navy EC, MC, OS (Project 59352007-048) Air Force 19, 99 NOTE: The activities listed above w

14、ere interested in this document as of the date of this document. Since organizations and responsibilities can change. You should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-