DLA MIL-B-36964 B-1973 BLANKET COMBAT CASUALTY LIGHTWEIGHT WATERPROOF ALUMINIZED PLASTIC《镀铝塑料防水损坏轻便作战毯》.pdf

《DLA MIL-B-36964 B-1973 BLANKET COMBAT CASUALTY LIGHTWEIGHT WATERPROOF ALUMINIZED PLASTIC《镀铝塑料防水损坏轻便作战毯》.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-B-36964 B-1973 BLANKET COMBAT CASUALTY LIGHTWEIGHT WATERPROOF ALUMINIZED PLASTIC《镀铝塑料防水损坏轻便作战毯》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-B-3676LlB 72 W 7777706 0240728 5 m /- MIL-B-36964B 27 August 1973 SUPHLSEDINC HIL-B-36964A 18 June 1973 MILITARY SPECIFICATION BLANKE, COHBAT, CASUALTY Lightweight, Waterproof, Aluminized Plastic This specification is approved for use by all Departments and Agencies of the Department of Defense.

2、 1. SCOPE 1.1 Scope. This specification covers lightweight, waterproof, aluminized plastic combat casualty blankets which shall also be suitable for use ma windbreak, sunshade, poncho, or position indicator in rescue missons. 1.2 Classification. The blankets covered by this specification shall be of

3、 the following types PB specified (see 6.2): 1.2.1 Types QPe 1 Type 11 Qpe III Olive Drab and Silver, 84“ x 56“ Olive Drab and Silver, 96“ x 56“ Fluorescent Orange and Silver, 96“ x 56“ 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date of invitation for bids or reque

4、st for proposal, form a part of this specification to the extent specified herein: SPECIFICATIONS Federal V-T-2 76 V-T-285 DDD-5331 W-A-PH) PPP-B-566 PPP-5585 PPP-B-601 PPP-B-621 PPP-5636 PPP-T-76 Thread, Cotton. Thread, Polyester. Binding, Bias Cut. Adhesive, Vater-resistant , (For Sealing Fiberboa

5、rd Boas, Folding, Paperboard. Box, hod, Wirebound. Box, wood, Cleated-Plyuood. Box, wood, Nailed and Lock-Corner. Box, Fiberboard. Taw, Preasure-sensitive, (For Carton Sealiag). Boxes). PSC 7210 6 * o Licensed by Information Handling ServicesMIL-B-36964B 72 H 9999906 02Li0729 7 W NIL- 3696 4B STANDA

6、RDS Federal FED-TEST-METHOD STD NO. 191 Textile Test Methods. FED-STD No. 595 Color Requirements, FED-STD No. 751 Stitchee, Seams and Stitching. Military MIL-STD-105 MIL-STD-129 Sampling Procedures and Tables for Inspection Marking for Shipment and Storage. by Attributes. (Copies of specifications,

7、standards, drawings and publications required by supplier in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer). 2.2 Other publications. The following documents form a part of this speci- fication to the extent spe

8、cified herein. issue in effect on date of invitation for bids or request for proposal shall Unless otherwise indicated, the apply AMERICAN SOCIETY FOR TESTING MATERIALS STANDARDS (Application for copies should be addressed to the American Society for Testing bterials, 1916 Rece Street, Philadelphia,

9、 Pa. U. S. DEPARRIENT OF COHHERCE Comercial Standard (CS) 191-53 Flaiimability of Clothing Textiles 19103.) (Application for copies should be addressed to Superintendent of Documents, u. S. Covernwnt Printing Office, Washington, D. C.). 3. REQUIRMENTS. 3.1 Materials. 3.1.1 Type f. + me co PPP-B-601,

10、 overseas type; PPP-B-621, class 2; or PPP-B-636, class weather- resistant, grade V3c. appendix of the applicable box specification. Table shall apply for PPP-B-636 box. Closure and strapping shall be as specified in the Special requirements of applicable 5.2.3 Level C. Rie subject conwdity shall be

11、 packed in substantial comercial containers of the type, size, and kind comaonly used for the purpose, so consttucted as to insure acceptance and safe delivery by comn or other carriers, at the lowest rate, to point of delivery called for in the contract or purchase order. S.3 Markina. 5.3.1 Unit pa

12、ckage. Each unit package and each intermediate package shall be urked in accordance with MIL-STD-129. proofing shall be required only when applicable carton is fabricated of water- resistant material. and color ahall be sham. hen Jabels are utilized, water- Contract or purchase order name and addres

13、s of manufacturer 5.3.2 Exterior container. Exterior container shall be marked in accordance With ML-STD-129. 6. NOTES 6.1 Intended we. The blankets covered by this specification are suitable for me as a windbreak, poncho or as a position indicator in rescue missions. 8 Licensed by Information Handl

14、ing ServicesMIL-B-36964B 6.2 Ordering data. Procurement documents should specify the follw*ing: (a) (b) Title, number and date of this specification. Selection of applicable levels of packaging and packing (see 5.1 and 5.2). Type and size required (see 1.2 and 6.4). 6.3 Sample. For access to aaruple

15、 U. S. Army f238 or International Orange 1238, piece No. Standard Sample 2824 address the procuring activity issuing the invitation for bid. 6.4 This specification does not include all types, classes, grades, or sizes, of the commodity indicated by the title of this specification, or which are comme

16、rcially available, but is intended to cover the types which are normally procured to meet military requirements. in the Federal Supply Catalog: 6.5 This specification is intended to cover the following items appearing 7210-00-935-6665 BLANKET, COMBAT CASUALTY, Lightweight, Waterproof, Aluminized Pla

17、stic, Olive Drab and Silver:84“ x 56“. 7210-00-935-6666 BLANKET, COMBAT CASUALTY, Lightweight, Waterproof, Aluminized Plastic, Olive Drab and Silver: 96“ x 56“. 7210-00-935-6667 BLANKET, COMBAT CASUALTY, Lightweight, Waterproof, Aluminized Plastic, Fluorescent Orange and Silver, 96“ x 56“. 6.6 Super

18、session data. This specification includes the requirements of Defense Medical Specification Data Sheet No. 4, dated 29 December 1971 and Modification No. 1 dated 27 Nobember 1972. Custodians : Preparing activity: Av-MD Navy - US Air Force - 03 Review activities : A9-m . Navy - MS Air Force - 03 Defense Supply Agency - DM Project Number: 7210-QF16 Review information is current as of the date of this d8cument. For future coordination of changes to this document, draft circulation should be based on the information in the current DODISS. Licensed by Information Handling Services