DLA MIL-A-22641 22 A-2013 ADAPTERS COAXIAL TO WAVEGUIDE (DOUBLE RIDGE) (BANDWIDTH RATIO 2 4 1) (SERIES SMA TO WAVEGUIDE - CLASS 5).pdf

《DLA MIL-A-22641 22 A-2013 ADAPTERS COAXIAL TO WAVEGUIDE (DOUBLE RIDGE) (BANDWIDTH RATIO 2 4 1) (SERIES SMA TO WAVEGUIDE - CLASS 5).pdf》由会员分享，可在线阅读，更多相关《DLA MIL-A-22641 22 A-2013 ADAPTERS COAXIAL TO WAVEGUIDE (DOUBLE RIDGE) (BANDWIDTH RATIO 2 4 1) (SERIES SMA TO WAVEGUIDE - CLASS 5).pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5985 MIL-A-22641/22A 28 January 2013 SUPERSEDING MIL-A-22641/22 21 September 1978 MILITARY SPECIFICATION SHEET ADAPTERS, COAXIAL TO WAVEGUIDE (DOUBLE RIDGE) (BANDWIDTH RATIO 2.4:1) (SERIES SMA TO WAVEGUIDE - CLASS 5) This specification is approved for use by all Departments and Agencies

2、 of the Department of Defense. The requirements for acquiring the antenna described herein shall consist of this specification sheet and MIL-DTL-22641. FIGURE 1. Adapters, coaxial to double ridge waveguide (class 5). REQUIREMENTS: Design, construction, and physical dimensions: See figure 1 and table

3、 I. Operating temperature range: -54 to +125 Frequency range: See table I. VSWR: See table I. INCH-POUND INACTIVE FOR NEW DESIGN AFTER 8 MAY 1998 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-22641/22A 2 TABLE I. Adapters, coaxial to waveguid

4、e (class 5 SMA to waveguide). Dash number Frequency range (GHz) Typical VSWR over any octave band with in frequency range VSWR over entire frequency range (max) 4/ 5/ RF Insertion loss dB (max) 5/ Waveguide housing Flange Waveguide and flange material Connector Dimensions 1/ 2/ 3/ A (max) B (max) C

5、(max) 01 .84- 2.0 1.10:1 1.15:1 .10 M23351/4-017 M39000/3-001 Aluminum Male 4.00 (102.0) 2.20 (56.0) 2.90 (74.0) 02 .84- 2.0 1.10:1 1.15:1 .10 M23351/4-017 M39000/3-001 Aluminum Female 4.00 (102.0) 2.20 (56.0) 2.90 (74.0) 03 2.0- 4.8 1.06:1 1.20:1 .10 M23351/4-025 M39000/3-024 Aluminum Male 2.25 (57

6、.2) 1.20 (30.5) 1.57 (40.0) 04 2.0- 4.8 1.06:1 1.20:1 .10 M23351/4-025 M39000/3-024 Aluminum Female 2.25 (57.2) 1.20 (30.5) 1.57 (40.0) 05 2.0- 4.8 1.06:1 1.20:1 .10 M23351/4-025 M39000/3-026 Aluminum Male 2.25 (57.2) 1.20 (30.5) 1.57 (40.0) 06 2.0- 4.8 1.06:1 1.20:1 .10 M23351/4-025 M39000/3-026 Al

7、uminum Female 2.25 (57.2) 1.20 (30.5) 1.57 (40.0) 07 2.0- 4.8 1.06:1 1.20:1 .10 M23351/4-025 M39000/3-028 Aluminum Male 2.25 (57.2) 1.20 (30.5) 1.57 (40.0) 08 2.0- 4.8 1.06:1 1.20:1 .10 M23351/4-025 M39000/3-028 Aluminum Female 2.25 (57.2) 1.20 (30.5) 1.57 (40.0) 09 3.5- 8.2 1.06:1 1.15:1 .10 M23351

8、/4-029 M39000/3-030 Aluminum Male 1.45 (37.0) .97 (25.0) .92 (23.0) 10 3.5- 8.2 1.06:1 1.15:1 .10 M23351/4-029 M39000/3-030 Aluminum Female 1.45 (37.0) .97 (25.0) .92 (23.0) 11 3.5- 8.2 1.06:1 1.15:1 .10 M23351/4-029 M39000/3-032 Aluminum Male 1.45 (37.0) .97 (25.0) .92 (23.0) 12 3.5- 8.2 1.06:1 1.1

9、5:1 .10 M23351/4-029 M39000/3-032 Aluminum Female 1.45 (37.0) .97 (25.0) .92 (23.0) 13 3.5- 8.2 1.06:1 1.15:1 .10 M23351/4-029 M39000/3-034 Aluminum Male 1.45 (37.0) .97 (25.0) .92 (23.0) 14 3.5- 8.2 1.06:1 1.15:1 .10 M23351/4-029 M39000/3-034 Aluminum Female 1.45 (37.0) .97 (25.0) .92 (23.0) 15 4.7

10、5- 11.0 1.06:1 1.15:1 .10 M23351/4-033 M39000/3-036 Aluminum Male 1.75 (44.5) .90 (23.0) 1.20 (30.5) 16 4.75- 11.0 1.06:1 1.15:1 .10 M23351/4-033 M39000/3-036 Aluminum Female 1.75 (44.5) .90 (23.0) 1.20 (30.5) 17 4.75- 11.0 1.06:1 1.15:1 .10 M23351/4-033 M39000/3-038 Aluminum Male 1.75 (44.5) .90 (2

11、3.0) 1.20 (30.5) 18 4.75- 11.0 1.06:1 1.15:1 .10 M23351/4-033 M39000/3-038 Aluminum Female 1.75 (44.5) .90 (23.0) 1.20 (30.5) 19 4.75- 11.0 1.06:1 1.15:1 .10 M23351/4-033 M39000/3-040 Aluminum Male 1.75 (44.5) .90 (23.0) 1.20 (30.5) 20 4.75- 11.0 1.06:1 1.15:1 .10 M23351/4-033 M39000/3-040 Aluminum

12、Female 1.75 (44.5) .90 (23.0) 1.20 (30.5) 21 7.5- 18.0 1.10:1 1.20:1 .10 M23351/4-037 M39000/3-072 Aluminum Male 1.30 (33.0) .75 (19.0) .77 (20.0) 22 7.5- 18.0 1.10:1 1.20:1 .10 M23351/4-037 M39000/3-072 Aluminum Female 1.30 (33.0) .75 (19.0) .77 (20.0) 23 7.5- 18.0 1.10:1 1.20:1 .10 M23351/4-037 M3

13、9000/3-074 Aluminum Male 1.30 (33.0) .75 (19.0) .77 (20.0) 24 7.5- 18.0 1.10:1 1.20:1 .10 M23351/4-037 M39000/3-074 Aluminum Female 1.30 (33.0) .75 (19.0) .77 (20.0) 25 7.5- 18.0 1.10:1 1.20:1 .10 M23351/4-037 M39000/3-076 Aluminum Male 1.30 (33.0) .75 (19.0) .77 (20.0) 26 7.5- 18.0 1.10:1 1.20:1 .1

14、0 M23351/4-037 M39000/3-076 Aluminum Female 1.30 (33.0) .75 (19.0) .77 (20.0) 1/ Dimensions are in inches. 2/ Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4 mm. 3/ Metric equivalents are in parentheses. 4/ A larger attenuator pad may be used for VSWR te

15、st setup (see figure 1 of MIL-DTL-22641) 5/ VSWR and RF insertion loss may be measured by swept frequency techniques. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-22641/22A 3 Referenced documents. In addition to MIL-DTL-22641, this document

16、references the following: MIL-W-23351/4 MIL-F-39000/3 MIL-PRF-39012/55 MIL-PRF-39012/57 The margins of this specification sheet are marked with vertical lines to indicate where modifications from this revision were made. This was done as a convenience only and the Government assumes no liability wha

17、tsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Custodians: Preparing activity: Army CR Navy EC Air Force 85 DLA CC DLA CC (Project 5985-2013-011)

18、Review activities: Army AR, AV, MI Navy AS, MC, OS Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-