DLA DSCC-DWG-89108 REV C-2007 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL STRAIGHT ENTRY 2B FOR MIL-DTL-24308 CONNECTORS《环境射频干扰 电磁干扰竖直进入背面外壳连接附件 2B类 用于MIL-C-24308连接器》.pdf

《DLA DSCC-DWG-89108 REV C-2007 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL STRAIGHT ENTRY 2B FOR MIL-DTL-24308 CONNECTORS《环境射频干扰 电磁干扰竖直进入背面外壳连接附件 2B类 用于MIL-C-24308连接器》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-89108 REV C-2007 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL STRAIGHT ENTRY 2B FOR MIL-DTL-24308 CONNECTORS《环境射频干扰 电磁干扰竖直进入背面外壳连接附件 2B类 用于MIL-C-24308连接器》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、REVISIONS LTR DESCRIPTION DATE APPROVED A Update format. Correcting references. Correcting address list of sources. 16 July 02 Robert Heber B C Page 2, Delete the following paragraphs: “Pull test”, “Electrical resistance” and “Thermal aging”. Page 4, Dash number 02, Dimension K Max: Delete “.250” an

2、d substitute “.372”. Page 4, Dash number 04, dimension H: Delete “1.844” and substitute “1.156”. Figure 1: Change dimensions from (1.904) to (1.940). Dash numbers 01-05, dimensional changes throughout. Editorial changes throughout. 07 May 04 17 May 07 Richard L. Taylor Lee Surowiec Prepared in accor

3、dance with ASME Y14.100 REV PAGE REV C C C C C REV STATUS OF PAGES PAGE 1 2 3 4 5 PREPARED BY PMIC N/A Jeffery Tunstall DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Abdo Abdouni APPROVED BY Robert Heber CONNECTOR, ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAI

4、GHT ENTRY, 2B FOR MIL-DTL-24308 CONNECTORS SIZE CAGE CODE 037Z3 DWG. NO. 89108 Original date of drawing 26 July 90 A REV C PAGE 1 OF 5 AMSC N/A 5935-E813-000 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. REQUIREMENTS: Shall b

5、e in accordance with SAE-AS85049, category 2B. Design and construction: Dimensions and configuration: See figure 1. Materials and finish: Accessory components: Aluminum alloy shall be in accordance with SAE-AS85049. Jackscrews: CRES shall be in accordance with SAE-AMS-QQ-S-763 passivated. EMI gasket

6、: Shall be in accordance with drawing 86128. Finish: N or W shall be in accordance with SAE-AS85049. N is electroless nickel in accordance with SAE-AS85049 (for space applications only). Part or Identifying Number (PIN): The PIN shall be in accordance with the following example: 89108- 01 WDrawing n

7、umber Dash Finish Marking: Marking shall be in accordance with SAE-AS85049, except the PIN shall be as stated above. Qualification inspection: Qualification inspection for the backshells specified herein shall not be required. Quality conformance inspection: Shall be in accordance with SAE-AS85049.

8、Inspection of packaging: Shall be in accordance with SAE-AS85049. Methods of inspection: Shall be in accordance with SAE-AS85049. 037Z3 89108 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVC PAGE2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

9、 IHS-,-,-SIZE CAGE CODE DWG NO. FIGURE 1. Backshell straight end entry. 037Z3 89108 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVC PAGE3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. K Dash number Shell size A

10、 max B max C ref D + .005 E + .030 F H max Min Max 01 1 1.393 (34.62) .624 (15.85) .322 (8.18).984(24.99).340(8.64)1.625 (41.28) 1.046 (24.59) .125 (3.18) .250 (6.35) 02 2 1.706 (42.95) .624 (15.85) .322(8.18)1.312(33.32).340(8.64)1.625 (41.28) 1.062 (26.97) .250 (6.35) .375 (9.52) 03 3 2.265 (57.15

11、) .624 (15.85) .322(8.18)1.852(47.04).343(8.71)1.844 (46.84) 1.156 (29.36) .312 (7.92) .475 (12.0) 04 4 2.900 (73.13) .624 (15.85) .322(8.18)2.500(63.50).343(8.71)1.844 (46.84) 1.156 (46.84) .312 (7.92) .475 (12.0) 05 5 2.800 (70.74) .750 (18.67) .375(9.52)2.406(61.11).343(8.71)1.844 (46.84) 1.218 (

12、30.94) .437 (11.10) .575 (14.61)NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parenthesis. 037Z3 89108 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVC PAGE4 FIGURE 1. Backshell straight end entry - Contin

13、ued.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. Approved source of supply. An approved source of supply is listed herein. Additional sources will be added as they become available. The vendor listed herein has agreed to thi

14、s drawing and a certificate of compliance has been to DSCC-VAI. DSCC drawing PIN 1/ Vendor CAGE number 06324 89108-XXX 550T002 1/ Parts must be purchased to this DSCC PIN to assure that all performance requirements and tests are met. Vendor CAGE Vendor name number and address06324 Glenair, Incorporated 1211 Air Way Glendale, CA 91201 037Z3 89108 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REVC PAGE5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-