DLA DSCC-DWG-85038 REV R-2006 ADAPTER ELECTRICAL COAXIAL RADIO FREQUENCY (BETWEEN SERIES SMA TO N)《射频的同轴电缆电气适配器(在SMA系列和N系列之间)》.pdf

《DLA DSCC-DWG-85038 REV R-2006 ADAPTER ELECTRICAL COAXIAL RADIO FREQUENCY (BETWEEN SERIES SMA TO N)《射频的同轴电缆电气适配器(在SMA系列和N系列之间)》.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-85038 REV R-2006 ADAPTER ELECTRICAL COAXIAL RADIO FREQUENCY (BETWEEN SERIES SMA TO N)《射频的同轴电缆电气适配器(在SMA系列和N系列之间)》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 06-09-07 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, sear

2、ching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Def

3、ense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLET

4、ED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columb

5、us 3990 East Broad Street Columbus, Ohio 43218-3990 5. CAGE CODE037Z3 6. NOR NO.5935-R041-006 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.85038 9. TITLE OF DOCUMENT Adapter, Electrical, Coaxial, Radio Frequency, (Between Series SMA to N) 10. REVISION LETTER

6、11. ECP NO.N/A a. CURRENTP b. NEWR 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “R” Revisions description column; add “Changes in accordance with NOR 5935-R041-006”. Revisions date column; add “06-09-07” Page 1, Rev status

7、of pages, blocks 1 and 8, add “R”. Revisions rev status of sheet 1 and 8, add “R”. Sheet : Delete the current Vendor PIN and substitute the following PIN: “ DSCC drawing PIN 1/ Vendor CAGE Vendor reference PIN Number 8503812FP-3 00795 2225000K721-000 “ 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X

8、one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FO

9、R GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)Richard L. Taylor d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERichard L.Talyor f. DATE SIGNED (YYMMDD) 06-09-07 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)06-09-0

10、7 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 03-01-17 Form Approved OMB No.

11、0704-0188 Public reporting burden for this collection is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments reg

12、arding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 2

13、2202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER

14、 LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R005-03 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7.

15、CAGE CODE037Z3 8. DOCUMENT NO.85038 9. TITLE OF DOCUMENT Adapter, Electrical, Coaxial, Radio Frequency, (Between Series SMA to N) 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTN b. NEWP 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Colum

16、n; add “P” Revisions description column; add “Changes in accordance with NOR 5935-R005-03”. Revisions date column; add “” Revisions rev status of pages, blocks 1, 8 and 9, add “P”. Revisions rev status of sheet 1, add “P”. Sheet 8: Revisions Ltr block, delete “M” and substitute “P” Sheet 8: Add the

17、following new Vendor PIN “ DSCC drawing PIN 1/ Vendor CAGE Vendor reference PIN Number 8503812FP-1 00779 1057354-1 8503812FP-2 00779 1057357-1 8503812FP-3 00779 1057465-1 8503812FP-4 00779 1057402-1 8503812FP-5 00779 1252992-1 8503812FP-6 00779 1057359-1 8503812FP-7 00779 1087866-1 “ 14. THIS SECTIO

18、N FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY

19、 AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. DATE SIGNED (YYMMDD) 03-01-17 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. D

20、ATE SIGNED (YYMMDD)03-01-17 DD Form 1695, APR 92 Previous editions are obsolete Sheet 9: Revisions Ltr block, delete “N” and substitute “P” Sheet 9: Add the following vendor address: “ Vendor CAGE Vendor name Number and address 00779 TYCO Electronics P. O. Box 3608 Harrisburg PA 17105 “ Provided by

21、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. 1. DATE (YYMMDD) 02-09-10 Form Approved OMB No. 0704-0188 Public reporting burden for this collection is estimated

22、 to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection

23、 of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork R

24、eduction Project (0704-0188), Washington, DC 20503. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSED. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.2. PROCURING ACTIVITY NO. 3. DODAAC

25、 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code)Defense Supply Center Columbus 3990 East Broad Street Columbus, Ohio 43216-5000 5. CAGE CODE037Z3 6. NOR NO.5935-R005-02 a. TYPED NAME (First, Middle Initial, Last) Ron Gary 7. CAGE CODE037Z3 8. DOCUMENT NO.85038 9. TITLE OF DOCUMENT Adapter,

26、Electrical, Coaxial, Radio Frequency, (Between Series SMA to N) 10. REVISION LETTER 11. ECP NO.N/A a. CURRENTM b. NEWN 12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIESALL 13. DESCRIPTION OF REVISIONSheet 1: Revisions Ltr. Column; add “N” Revisions description column; add “Changes in accordanc

27、e with NOR 5935-R005-02”. Revisions date column; add “02-09-10” Revisions rev status of pages, block 1, add “N”. Revisions rev status of sheet 1, add “N”. Sheet 9: Vendor name and address, delete: “Connecting Devices Incorporated and substitute: “Tensolite Company 2400 Grand Avenue 2400 Grand Avenue

28、 Long Beach, CA 90815” Long Beach, CA 90815” Sheet 9: Revisions Ltr block, delete “M” and substitute “N” 14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incor

29、porate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENTDSCC-VAI c. TYPED NAME (First, Middle Initial, Last)ROBERT HEBER d. TITLECHIEF, INTERCONNECTION DEVICES e. SIGNATURERobert M. Heber f. D

30、ATE SIGNED (YYMMDD) 02-09-10 15a. ACTIVITY ACCOMPLISHING REVISIONDSCC-VAI b. REVISION COMPLETED (Signature)Ron Gary c. DATE SIGNED (YYMMDD)02-09-10 DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-RE

31、VISIONS LTR DESCRIPTION DATE APPROVED A Add sources 74868. 2 Aug 1985 Randy Larson B Specify through and tapped mounting holes. Modify dimensions on figure 1. Add new configurations. 15 Apr 1987 Randy Larson C Add new configuration. Specify hole pattern and panel thickness. 11 Aug 1987 Randy Larson

32、D Delete .495 dimension from figure 1. 16 Nov 1987 Randy Larson E Add source 74868 for 8503812FP-3 through -7. 24 Jun 1988 Randy Larson F Modify length dimension. Add source 94375. 2 Jan 1991 Randy Larson G Change address and CAGE for Omni Spectra. Add 30990 as new source. Editorial changes througho

33、ut. 2 Mar 1992 Randy Larson H Flange dimension change. 10 Sep 1992 Randy Larson J Correct vendor 26805 similar PIN for 8503812FP-4. In table, for 8503812FP-4 change from “3084-4028-02” to “3082-4028-02”. 17 Nov 1993 Randy Larson K Add new vendors and CAGE 24931 and 95077 10 Nov 1994 Randy Larson L C

34、hanges to figure 1. 26 Nov 1999 Robert Heber M PIN and source update 16 Nov 2001 Robert M. Heber Prepared in accordance with MIL-STD-100 REV PAGE REV M M M M M M M M M REV STATUS OF PAGES PAGE 1 2 3 4 5 6 7 8 9 PREPARED BY PMIC Ron Gary DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECK

35、ED BY TITLE Charles Koeller APPROVED BY Randy Larson ADAPTER, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO N) SIZE CAGE CODE 037Z3 DWG. NO. 85038 Original date of drawing 9 May 1985 A REV M PAGE 1 OF 9 AMSC N/A 5935-E623 DISTRIBUTION STATEMENT A. Approved for public release; distribu

36、tion is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85038 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV M PAGE 2 FIGURE 1. General configuration. PIN 8503812FP-1 AND 8503812FP-2 INACTIVE FOR

37、NEW DESIGN Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85038 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV M PAGE 3 Inches mm Inches mm Inches mm .010 0.25 .364 9.25 .713 18.11 .015 0.38 .495 12.57 .71

38、9 18.26 .080 2.03 .531 13.49 .723 18.36 .093 2.36 .536 13.61 .750 19.05 .187 4.75 .625 15.88 .867 22.02 .250 6.35 .627 15.93 1.01 25.7 .320 8.13 .630 16.00 1.24 31.5 .354 8.99 .656 16.66 1.254 31.85 1.29 32.8 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information

39、 only. 3. Unless otherwise specified, all tolerances shall be .015 (0.38 mm). 4. All undimensioned pictorial configurations are for reference purposes only. 5. N and SMA female interfaces shall be in accordance with MIL-STD-348. FIGURE 1. General configuration - Continued. PIN 8503812FP-3 Provided b

40、y IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85038 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV M PAGE 4 NOTE: Parts manufactured to the previous dimension of .093 .010 inch are acceptable for Government use unt

41、il stock is purged. FIGURE 1. General configuration - Continued. PIN 8503812 FP-4 PIN 8503812 FP-5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85038 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV M PAGE

42、 5 FIGURE 1. General configuration - Continued. PIN 8503812 FP-6 AND 8503812 FP-7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85038 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV M PAGE 6 ENGINEERING DA

43、TA: Nominal impedance: 50 ohms. Frequency range: 15 GHz. Voltage rating: 335 V rms at sea level. 85 V rms at 70,000 feet. Operating temperature: -65C to +165C. REQUIREMENTS: Requirements of drawing 85017 are applicable. Dimensions and configuration: See figure 1. Center contact retention: Series SMA

44、 1/ Series N Axial force (pounds minimum) 6 6 Torque Not applicable Not applicable. Coupling proof torque 2/ 15 inch-pounds, minimum Force to engage and disengage Series SMA 1/ Series N Longitudinal force (pound maximum) Not applicable 3 Torque (inch-pounds, maximum) 2 6 Mating characteristics: Seri

45、es SMA 1/ Series N Center contact (socket): Overside test pin diameter (inch) .0375 +.0001 .074 minimum Insertion depth (inch minimum) .030/.045 .125 Number of insertions 3 1 Pin finish (microinches) 16 16 Maximum test pin (insertion force test): Steel test pin diameter (inch minimum) .0370 +.0001 .

46、066 Pin finish (microinches) 16 16 Insertion force (pounds maximum) 3 2 Insertion depth (inch minimum) .050/.075 .125 Minimum test pin (withdrawal force): Series SMA 1/ Series N Steel test pin diameter (inch) .0355 -.0001 .063 Pin finish (microinches) 16 16 Withdrawal force (ounce minimum) 1 1 Inser

47、tion depth (inch minimum) .050/.075 .125 _ 1/ Socket contact. 2/ Pin contact. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 85038 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV M PAGE 7 Permeability: 2.0 Air = 1.0. Seal: Pressurized: Not applicab