DLA A-A-59499 B-2011 BATTERY DRY BA-59.pdf
《DLA A-A-59499 B-2011 BATTERY DRY BA-59.pdf》由会员分享,可在线阅读,更多相关《DLA A-A-59499 B-2011 BATTERY DRY BA-59.pdf(6页珍藏版)》请在麦多课文档分享上搜索。
1、Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data that may improve this document should be sent to: DLA Land and Maritime, Columbus, ATTN: VAT, P.O. Box 3990, Columbus, OH 43218-3990, or email mailto:CircuitProtectdscc.dla.mil. Since contact information c
2、an change you may want to verify the currency of the address information using the ASSIST Online database at https:/assist.daps.dla.mil. AMSC N/A FSC 6135 INCH-POUND A-A-59499B 15 October 2011 SUPERSEDING A-A-59499A 21 June 2006 COMMERCIAL ITEM DESCRIPTION BATTERY, DRY, BA-59 The General Services Ad
3、ministration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers the general requirements for a +45 V dc dry-cell battery. This battery is intended for use in commercial/industrial applications such as test equi
4、pment, radio sets, and other portable electronic and communication equipment powered by non-rechargeable dry cell batteries. 2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which is included in the Part or Identification Number (PIN). The PIN shall be AA5
5、9499 (see 7.1). 3. SALIENT CHARACTERISTICS. 3.1 Interface and physical dimensions. Batteries supplied to this CID shall be as specified herein and shall meet the requirements of NEMA C18.1M Part 1 (see figure 1). 3.2 Voltage. The battery shall provide a nominal voltage of +45 V dc. 3.3 Weight. The b
6、attery weight shall not exceed 2 pounds, 2 ounces. 3.4 Terminal. type. The terminal shall consist of a 5-hole socket. 3.5 Cell type. Cells shall meet the requirements of ANSI Number 15A, 15D, 15F or 15M of NEMA C18.1M, Part 1. 3.6 Dimensions. The battery shall meet the dimensional requirements shown
7、 in figure 1. 3.7 Marking. Batteries supplied to this CID shall be marked with the manufacturers (MFRs) standard commercial PIN. (NOTE: The part number marked on the unit pack shall be the CID PIN.) 3.8 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environment
8、ally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 3.9 Workmanship. Batteries shall be processed in such a manner as to be uniform i
9、n quality and shall be free from other defects that will affect life, serviceability, or appearance. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59499B 2 FIGURE 1. Interface and physical dimensions. Provided by IHSNot for ResaleNo reproductio
10、n or networking permitted without license from IHS-,-,-A-A-59499B 3 Ltr Inches mm Min Max Min Max A .438 - 11.13 - B 5.375 5.501 136.53 139.73 C .472 .598 11.99 15.19 D 1.125 1.251 28.56 31.78 E 3.406 3.594 86.51 91.29 F .796 .922 20.22 23.43 G 1.625 1.813 41.28 46.05 NOTES: 1. Dimensions are in Inc
11、hes. 2. Unless otherwise specified, tolerance is 0.063 inch (1.59 mm). FIGURE 1. Interface and physical dimensions - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59499B 4 4. REGULATORY REQUIREMENTS. The offeror/contractor is encoura
12、ged to use recovered materials to the maximum extent practicable, in accordance with 23.403 of the Federal Acquisition Regulation (FAR). 5. PRODUCT CONFORMANCE PR0OVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own
13、 drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or
14、order. 7. NOTES. 7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See section 2 for PIN format example. 7.2 Environmentally preferable material. Environmentally preferable materials should be used to the maximum extent possible to meet the requirements
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLAAA59499B2011BATTERYDRYBA59PDF
