DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf

《DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59494 3-2010 WHEEL PNEUMATIC TIRE 4 00-8.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、INCH-POUND A-A-59494/3 28 April 2010 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET WHEEL, PNEUMATIC TIRE, 4.00-8 The General Services Administration has authorized the use of this commercial item description for all federal agencies. The complete requirements for procuring wheels and tires describ

2、ed herein shall consist of this document and the issue in effect of A-A-59494. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classification system which is included in the PIN as shown in the following example (see NOTES). AA594

3、94 /03 - 001 CID number Applicable CID specification sheet (two digits) Dash number (see figure 1) SALIENT CHARACTERISTICS. Interface and physical dimensions. Wheels and tires supplied to this CID specification sheet shall be as specified herein (see figure 1). FIGURE 1. Wheel, pneumatic tire, 4.00-

4、8. AMSC N/A FSC 2530 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/3 2 Dash number Material 001 Steel 002 Aluminum alloy Inches mm Inches mm 0.17 4.3 0.62 15.7 0.1196 3.0 0.625 15.9 0.125 3.2 0.81 20.6 0.25 6.4 1.875 47.6 0.35 8.9 3.375 8

5、5.7 0.375 9.5 3.75 95.3 0.406 10.3 4.5 114.3 0.44 11.2 6.5 165.1 0.531 13.5 7.968 202.4 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. This shall be a demountable type wheel which can be removed from the hub without deflating the tire. 4. Wheels shall fi

6、t hubs specified in A-A-59494/6 and A-A-59494/8. FIGURE 1. Wheel, pneumatic tire, 4.00-8 Continued. NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the classification section for PIN format example. Source of documents. Comme

7、rcial Item Descriptions A-A-59494 - Wheels and Hubs for Industrial Pneumatic Tires (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094). Commercial produc

8、ts. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would mee

9、t the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-

10、,-,-A-A-59494/3 3 MFRs CAGE MFRs name and address 52793 Saginaw Products Corporation 68 Williamson St. Saginaw, MI 48601-3246 Phone: 989-753-1411 Fax: 989-753-4386 http:/ 56190 Metadure Parts & Sales Inc. 165 Gazza Blvd. Farmingdale, NY 11735 Phone: 631-249-2141 Fax: 631-249-4546 OW357 PDI Ground

11、Support Systems Inc. 5905 Grant Ave. Cleveland, OH 44515-5609 Phone: 216-271-7344 Fax: 216-271-7550 davidrpdi- http:/www.pdi- Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown (see table I). This information is being provided to assist

12、 in reducing proliferation in the Government inventory system. TABLE I. P/N supersession data. Dash number (see figure 1) A-A-59494/3 MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ MFRs CAGE MFRs P/N 1/ 001 52793 10302 56190 N/A OW357 N/A 002 52793 N/A 56190 N/A OW357 N/A 1/ The manufacturers P/N shall

13、 not be used for procurement to the requirements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown. For actual part marking requirements, see the marking paragra

14、ph of A-A-59494. National stock number (NSN). The following is a list of NSNs assigned which correspond to this CID specification sheet. The list is for information only and may not be indicative of all possible NSNs associated with the CID specification sheet. For up to date information on assigned

15、 NSNs, please contact the aforementioned DSCC office listed in A-A-59494 (see table II). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59494/3 4 TABLE II. NSNs. Dash number (see figure1) A-A-59494/3 NSN 001 2530-00-882-4784 002 N/A MILITARY INT

16、ERESTS: CIVIL AGENCY AND COORDINATING ACTIVITY: Custodians: GSA - FAS Army - AT Air Force - 99 Preparing activity: DLA CC DLA - CC Review activity: Project 2530-2009-003 Air Force - 84 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-