DLA A-A-55275-1995 T-SHIRT PHYSICAL CONDITIONING UNIFORM《身体调理制服上衣》.pdf

《DLA A-A-55275-1995 T-SHIRT PHYSICAL CONDITIONING UNIFORM《身体调理制服上衣》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55275-1995 T-SHIRT PHYSICAL CONDITIONING UNIFORM《身体调理制服上衣》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 A-A-55275 m 7777774 0367573 344 m t A-A-5 52 75 May - 4. 1995 COMMERCIAL ITEM DESCRIPTION T-SHIRT, PHYSICAL CONDITIONING UNIFORM The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This commercial item description covers

2、 the requirements for a T-shirt to be worn by Air Force personnel as part of the Physical Conditioning Uniform. 2. CLASSIFICATION. The T-shirt shall be of one type and class. 3. SALIENT CHARACTERISTICS. 3.1 Description. The T-shirt shall be short sleeved with a high crew neck collar (See Figure I).

3、The sleeves and the bottom of the T-shirt shall be hemmed with a 1 distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - A-A-55275 9999974 0367574 280 M SIZE PLACEMENT OF LOGO A-A-5 5 2 7 5 XSMALL SMALL MEDIUM LARGE XLARGE Tol

4、erance 3 3-1/2 4 4-1/2 5 - +1/4 printed across the front chest of the T-shirt in an arch, positioned as outlined in Table I and in accordance with Figure II. The lettering shall be of the same style as shown in Figure II, except that the letters shall be 2 inches in height. The screen print shall ma

5、tch Navy Blue shade 35048 of FED-STD-595. TABLE 1. SCREEN PRINT LOCATION. IN INCHES (Centered below bottom of neckband to top of lettering) 3.2 Basic material. The T-shirt shall be fabricated from jersey knit material having 55 2 5 percent cotton and the remaining percentage polyester. The material

6、shall weigh 5.5 5 0.5 ounces per square yard, have a minimum of 30 wales per inch and have a minimum of 45 courses per inch when tested in accordance with ASTM D-3887. The material shall have a minimum bursting strength of 75 pounds when tested in accordance with ASTM D-3787 and shall not shrink or

7、elongate more than 10 percent when tested in accordance with AATCC Method 150 using normal washing cycle. The material shall match the standard sample for shade Lt. Heather Grey 466 (see 7.4). 3.2.1 Matchinq. The color of the finished cloth shall match the standard sample when viewed under filtered

8、tungsten lamps that approximate artificial daylight and having a correlated color temperature of 7500+200K, with illumination of 100+20 foot candles, and shall be a good match to the standard sample under incandescent lamplight at 23005200K. 3.3 Label. Commercial type label is acceptable except that

9、 it shall also have a label with the contract number and NSN. The commercial label shall provide the size, care instructions, and fiber content information. 3.3.1 Label/taq. Each item shall be individually bar-coded with a paper tag for personal clothing items. The paper tag shall be standard bleach

10、ed sulfate having a basis weight of 100 pounds. The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The tags shall have a hole and shall be attached to each item by a fastener, clearly legible and readable by a scanner. The bar coding element shall

11、be a 13 digit national stock number (NSN). The bar code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item. 2 Provided by IHSNot for ResaleNo reproduc

12、tion or networking permitted without license from IHS-,-,-A-A- 5 5 2 7 5 1/2 CHEST A LENGTH B NECK OPENING C SLEEVE OVER D SLEEVE OPENING E ARMHOLE F 3.4 SIZES AND MEASUREMENTS. The T-shirt shall be provided in the following sizes and measurements: Tolerance Extra Small Medium Large Extra Small Larg

13、e - +1 16 17 19 21 23 - +1 26 27 28 29 30 - +1 7-112 8 8-112 9 9-1/2 - +1/2 6-114 7 7-314 8-1/2 9-1/4 - +1/2 5-314 6-1/4 6-314 7-114 7-3/4 - +1/2 7-1/4 8-114 9-1/4 10-114 11-1/4 TABLE SHOULDER G II. - +1/2 4 5 6 7 8 SIZES conforms to the producers own drawings, speciEications, standards, and quality

14、 assurance practices; and is the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 5.2 Visual examinatio

15、n. The T-shirts shall be examined for the defects fisted in paragraph 5.3. 5.3 Defects. Any hole, cut, tear, color not as specified; thread ends not removed or not trimmed; any component missing or not as specified; seam twisted, puckered, open; needle chew or tight tension; label incorrect or illeg

16、ible; logo incorrect, illegible or misplaced; measurement or design of T-shirt not as specified. 5.4 Market acceptabilitv. The item offered, or a generic equivalent, must have been sold to the commercial market or to the Government for at least 2 years. 5.5 Warranty. The item offered shall include t

17、he standard warranty given to the commercial market beginning with the date of delivery of the individual items. 6. PACKAGING 6.1 Preservation, packincl, and markinq. The preservation, packing, and marking shall be as specified in the contract or order. 7. NOTES 7.1 Source of Government documents. C

18、opies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-552 7 5 7.2 . Source of non-Government docume

19、nts ASTM Test Methods (Applications for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187 .) AATCC Test Method (Applications for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), P.O. Bo

20、x 12215, Triangle Park, NC 27709-2215.) 7.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order. 7.4 Sample. For access to standard sample for shade address the contracting activity issuing the invitation for bid. MILITARY INTERESTS: Custodians Air force

21、- 45 CIVIL AGENCY COORDINATING ACTIVITY : GSA - FSS PREPARING ACTIVITY: DIA - CT Project 8415-0043 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55275 = 9999974 0167578 926 A-A-5 5 2 7 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55275 7999974 0167577 862 A-A-5527 5 FIGURE II. AIR FORCE LOGO 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-