DIN ISO 9904-2002 Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery (ISO 9904 2000)《纺织机械和附件 纺织预备和纺织机械用钢针 (ISO 9904 2000)》.pdf

《DIN ISO 9904-2002 Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery (ISO 9904 2000)《纺织机械和附件 纺织预备和纺织机械用钢针 (ISO 9904 2000)》.pdf》由会员分享，可在线阅读，更多相关《DIN ISO 9904-2002 Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery (ISO 9904 2000)《纺织机械和附件 纺织预备和纺织机械用钢针 (ISO 9904 2000)》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 59.120.10Textilmaschinen und Zubehr Stahlnadeln fr Spinnereivor-bereitungsmaschinen und Spinnereimaschinen(ISO 9904 : 2000)Ref. No. DIN ISO 9904 : 2002-08English price group 09 Sales No. 040912.02DEUTSCHE NORM August 2002ISO 9904ISO Standard comprises 11 pages. No part of this translation may be

2、 reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Textile machinery and accessoriesSteel pins for spinning preparatory andspinning machinery(ISO 9904 :

3、 2000)This standard incorporates International StandardISO 9904 Textile machinery and accessories Steel pins for spinning preparatory and spinningmachinery.A comma is used as the decimal marker.National forewordThis standard has been prepared by ISO/TC 72 Textile machinery and machinery for dry-clea

4、ning andindustrial laundering.The responsible German body involved in its preparation was the Normenausschuss Textil und Textil-maschinen (Textiles and Textile Machinery Standards Committee), Technical Committee Spinnerei-maschinen.DIN EN ISO 6507-1 and DIN EN ISO 6507-2 are the standards correspond

5、ing to International StandardsISO 6507-1 and ISO 6507-2, respectively, referred to in the bibliography of the ISO Standard.AmendmentsThis standard differs from the June 1991 edition as follows:a) The scope has been extended to cover round pins with notch, two types of flat pins, and flat pins withfo

6、ot.b) The upper limit values for the diameter of round pins have been changed.c) The specifications for Vickers hardness have been amended.Previous editionsDIN 64101: 1927-07, 1929-01, 1961-03; DIN TEX 4102 = DIN 64102: 1928-07, 1965-05;DIN TEX 4105: 1928-10; DIN 64105: 1949-04, 1962-11; DIN 64106:

7、1950-01, 1962-11;DIN TEX 4104 = DIN 64104: 1928-10; DIN 64112: 1946-05; DIN 64130: 1962-06; DIN 64135: 1963-06;DIN ISO 9904: 1991-06.SupersedesJune 1991 edition.National Annex NAStandards referred to(and not included in Bibliography)DIN EN ISO 6507-1 Metallic materials Vickers hardness test Part 1:

8、Test method (ISO 6507-1 : 1997)DIN EN ISO 6507-2 Metallic materials Vickers hardness test Part 2: Verification of testing machines(ISO 6507-2 : 1997)Page 1ISO 9904 : 2000Textile machinery and accessoriesSteel pins for spinning preparatory and spinning machinery1223781011Page 2ISO 9904 : 2000Page 3ISO 9904 : 2000Page 4ISO 9904 : 2000Page 5ISO 9904 : 2000Page 6ISO 9904 : 2000Page 7ISO 9904 : 2000Page 8ISO 9904 : 2000Page 9ISO 9904 : 2000Page 10ISO 9904 : 2000Page 11ISO 9904 : 2000