DIN ISO 965-5-2002 ISO general purpose metric screw threads - Tolerances - Part 5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads .pdf

《DIN ISO 965-5-2002 ISO general purpose metric screw threads - Tolerances - Part 5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads .pdf》由会员分享，可在线阅读，更多相关《DIN ISO 965-5-2002 ISO general purpose metric screw threads - Tolerances - Part 5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads .pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 21.040.10Metrisches ISO-Gewinde allgemeiner Anwendung Toleranzen Teil 5: Grenzmaefr Innengewinde, passend fr feuerverzinkte Auengewinde mit Hchstmaender Toleranzfeldlage h vor Aufbringung des berzuges (ISO 965-5 : 1998)This standard incorporates International StandardISO 965-5 ISO general purpos

2、e metric screw threads Tolerances Part 5: Limits of sizes for internalscrew threads to mate with hot-dip galvanized external screw threads with maximum size oftolerance position h before galvanizing.A comma is used as the decimal marker.National forewordThis standard has been prepared by ISO/TC 1 Sc

3、rew threads, SC 2 Tolerances.The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen(Fundamentals in Technology Standards Committee).The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standardare as follows:

4、ISO Standard DIN StandardISO 68-1 DIN ISO 68-1ISO 262 DIN ISO 262ISO 898-2 DIN EN 20898-2ISO 965-1 DIN ISO 965-1ISO 965-4 DIN ISO 965-4ISO 5408 DIN 2244National Annex NAStandard referred to(and not included in Normative references)DIN 2244 Screw threads TerminologyDIN EN 20898-2 Mechanical propertie

5、s of fasteners Part 2: Nuts with coarse pitch thread and specifiedproof load values (ISO 898-2 : 1992)DIN ISO 68-1 ISO general purpose screw threads Basic profile Part 1: Metric screw threads(ISO 68-1 : 1998)DIN ISO 262 ISO general purpose metric screw threads Selected sizes for screws, bolts and nu

6、ts(ISO 262 : 1998)DIN ISO 965-1 ISO general purpose metric screw threads Tolerances Part 1: Principles and basicdata (ISO 965-1 : 1998)DIN ISO 965-4 ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw t

7、hreads tapped withtolerance position H or G after galvanizing (ISO 965-4 : 1998)Ref. No. DIN ISO 965-5 : 2002-05English price group 07 Sales No. 040711.02DEUTSCHE NORM May 2002ISO 965-5Continued overleaf.ISO Standard comprises 6 pages. No part of this standard may be reproduced without the prior per

8、mission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ISO general purpose metric screw threads TolerancesPart 5: Limits of sizes for internal screw threads to mate with hot-dipgalvanized e

9、xternal screw threads with maximum size of toleranceposition h before galvanizing (ISO 965-5 : 1998)Page 1ISO 965-5 : 1998ISO general purpose metric screw threads TolerancesPart 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screwthreads with maximum size of tolerance position h before galvanizingPage 2ISO 965-5 : 1998Page 3ISO 965-5 : 1998Page 4ISO 965-5 : 1998Page 5ISO 965-5 : 1998Page 6ISO 965-5 : 1998