DIN ISO 16757-1-2015 Data structures for electronic product catalogues for building services - Part 1 Concepts architecture and model (ISO 16757-1 2015)《建筑设备电子产品目录的数据结构 第1部分 概念 体系结.pdf

《DIN ISO 16757-1-2015 Data structures for electronic product catalogues for building services - Part 1 Concepts architecture and model (ISO 16757-1 2015)《建筑设备电子产品目录的数据结构 第1部分 概念 体系结.pdf》由会员分享，可在线阅读，更多相关《DIN ISO 16757-1-2015 Data structures for electronic product catalogues for building services - Part 1 Concepts architecture and model (ISO 16757-1 2015)《建筑设备电子产品目录的数据结构 第1部分 概念 体系结.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、September 2015 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

2、ICS 91.010.01!%F0?“2351328www.din.deDDIN ISO 16757-1Data structures for electronic product catalogues for building services Part 1: Concepts, architecture and model (ISO 16757-1:2015),English translation of DIN ISO 16757-1:2015-09Datenstrukturen fr elektronische Produktkataloge der TechnischenGebude

3、ausrstung Teil 1: Konzepte, Architektur und Modelle (ISO 16757-1:2015),Englische bersetzung von DIN ISO 16757-1:2015-09Structures de donnes pour catalogues lectroniques de produits pour les services dubtiment Partie 1: Concepts, architecture et modle (ISO 16757-1:2015),Traduction anglaise de DIN ISO

4、 16757-1:2015-09www.beuth.deDocument comprises 38 pagesIn case of doubt, the German-language original shall be considered authoritative.08.15 A comma is used as the decimal marker. Contents PageNational foreword 3Introduction 41 Scope . 62 Terms and definitions . 73 Requirements and fundamentals 93.

5、1 Content of a catalogue . 113.2 Manufacture vs. user view of a catalogue . 113.3 Parametric representation of catalogue data 123.4 Dynamic technical properties describing the behaviour of a product 133.5 Descriptive objects and representation objects 153.6 Purpose of Content Parts 153.7 Relationshi

6、p to dictionary standards (ISO 13584, ISO 12006-3) 164 Product configuration and selection 164.1 Configuration by referencing properties . 164.2 Selection of specific products 184.3 Standardised and catalogue-specific properties 205 Technical properties 215.1 Static properties 225.2 Dynamic properti

7、es . 226 Accessories and composed products 237 Representation objects and descriptive objects .267.1 Article numbers . 267.2 Geometry data 277.3 Product description . 287.4 Descriptive objects . 288 Requirements to implement ISO 16757 in engineering systems289 Data model .289.1 Properties . 299.1.1

8、Technical perspective of properties . 299.1.2 Content perspective of properties . 319.2 Selection properties and the selection property hierarchy .329.3 Technical properties 3510 Embedding of product data of selected products into the building information model 36Bibliography .38DIN ISO 16757-1:2015

9、-09 2 National foreword This document (ISO 16757-1:2015) has been prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works, Subcommittee SC 13, Organization of information about construction works. The responsible German body involved in its preparation was the DIN-Normenauss

10、chuss Heiz- und Raumlufttechnik (DIN Standards Committee Heating and Ventilation Technology), Working Committee NA 041-01-71 GA Gemeinschaftsarbeitsausschuss NHRS/NABau: Produktdaten fr Anlagenmodelle der TGA (SpA ISO/TC 59/SC 13/WG 11). Attention is drawn to the possibility that some of the element

11、s of this document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. ISO 16757 consists of the following parts, under the general title Data structures for electronic building services product catalogues: Part 1: Concepts, architect

12、ure and model Part 2: Geometry The following parts are planned: Part 3: Script language and functions Part 4: Cooperation with building information modelling standards Part 5: Product catalogue exchange format DIN ISO 16757-1:2015-09 3 IntroductionThese Content Parts of this International Standard w

13、ill define standardised properties for the product groups and the composition of the technical data model. Furthermore, they determine the specific programming function-interfaces to layout, calculate, and simulate the products.There is a growing need for information about building services systems

14、during the planning and design of buildings. The designers in building services have to execute detailed calculations and simulations to ensure saving of energy and to satisfy hygienic and comfort criteria in heating, ventilation, air conditioning, and sanitary plants. They have to provide better an

15、d better documentation to verify the compliance with these requirements. The resulting designs have to describe the complete plants without internal interference or intersection with the building.These requirements can only be achieved with modern engineering applications like CAD- and CAE-systems,

16、calculation programs, BIM tools, and management software. The software systems need exact data of the used plant components. Each component contributes to the performance data of the whole building.There are many manufacturers, who provide products to certain sectors of building services (such as he

17、ating, ventilation, air conditioning, sanitary). Others provide only certain product groups (radiators, heaters, air condition equipment, air pipes, valves, devices).Classical catalogues provide product data in tables and show the design algorithms in diagrams and design rules. In addition to the te

18、chnical properties required for functional design and calculation (e.g. in the form of curve diagrams), such catalogues also contain the geometry data needed for dimensional design and construction (e.g. in the form of dimensional drawings with port details) and the descriptive objects serving for v

19、isualization (such as photos, video sequences, or acoustical sequences).Additionally, nearly all big manufacturers provide their own software (mostly for free) as electronic catalogues to select, to design, and to calculate their products.Unfortunately, none of these software solutions meets all the

20、 requirements of the planner. Needless to say, that each program contains only the product range of its manufacturer. So it is not possible to perform a continuous planning of the plant with products of different manufacturers.Thus, it is desirable to provide engineering applications which are indep

21、endent from the manufacturers. The next problem is that data files from different manufacturers if available at all are organized in different data formats, structures, and terminologies.Independent CAD-systems and calculation software need to get data and algorithms in a uniform way. Only if produc

22、t data and algorithms are automatically available, the calculation and simulation of a complete HVAC plant is possible.Software providers cannot afford to provide all data from all product manufacturers in the format required by their system. Also, product manufacturers cannot provide current inform

23、ation about their products in the formats of all potential software systems. Thus, we have a typical situation where standardization is required to improve the exchange of information between business partners.DIN ISO 16757-1:2015-09 4Within single product groups (e.g. radiators), national initiativ

24、es to standardize exchange formats have already been conducted. But there is a lack of unification of existing formats across all product groups.Required is a uniform, internationally standardised definition for product catalogue data interchange.Such a definition eliminates the need to manage diffe

25、rent data formats and to use different software systems to deal with products of different manufacturers, and this leads to a significant reduction of costs for manufacturers and users. Integrating this data into BIM-systems (Building Information Modelling) allows data interchange between IT systems

26、. In addition, to the benefit for planning, there will be an amount of advantages for other software solutions, e.g. facility management and life cycle management.ISO 16757 is a multi-part standard. Future parts will include: an overview of ISO 16757 and the rationale for its elements and organizati

27、on; geometric elements which are used to represent the products in the catalogues of ISO 16757; definition of the script language used in ISO 16757 for various purposes; IDM descriptions for ISO 16757, including process descriptions for those processes which are to be supported by the standard and i

28、t comprises the rules for mapping of product and the property descriptions to IFC and for defining properties semantically with IFD; definition of an exchange format in XML by which electronic catalogues can be exchanged according to the definitions of ISO 16757. The exchange format will be specifie

29、d as an XML Schema Definition (XSD).This International Standard offers for the first time an interface which allows the uniform handling of data about technical, commercial, maintenance, service, as well as geometry, images, video, and text information.DIN ISO 16757-1:2015-09 5 1 ScopeThe primary pu

30、rpose of this International Standard is the provision of data structures for electronic product catalogues to transmit building services product data automatically into models of building services software applications. This includes a meta model for the specification of product classes and their pr

31、operties and a meta model for the product data which is exchanged in product catalogues. Product data has to follow the specifications for their product groups.The standard series is split into two areas: Basic concepts like conceptual models, languages, geometry representations, and XML schemas for

32、 data exchange are provided in the Conceptual Parts of the standard series (Parts with a one digit number). Using these resources, the Content Parts of this International Standard define for various product groups of building services concrete models for the description and the exchange of products.

33、The basic concepts which are provided by the standard series include the following: resources for the specification of selection properties and a selection property tree guiding the selection process to identify the appropriate product variant from a parametric electronic catalogue; resources for th

34、e specification of dependent properties and their computational functions to compute their values in dependency from installation parameters; resources for the specification of composition relationships between products which can be used to model structures like bill of materials or accessory relati

35、onships; resources for a parametric constructed solid geometry (CSG) based geometry representation containing specific CSG elements geometrical elements which are typical for building services products.This part of ISO 16757 specifies the underlying concepts, a generic model specifying the available

36、 modelling elements and their relationships, and a framework for the specification of the Content Parts by describing the elements which are to be provided by these Parts.Not in scope of this part of ISO 16757 are the following: a detailed description of the used geometrical primitives;NOTE Geometry

37、 is described in ISO 16757-2. a specification of the script language used to exchange algorithms for computing the values of dependent and computable properties;NOTE The script language is described in ISO 16757-3.DIN ISO 16757-1:2015-09 6Data structures for electronic product catalogues for buildin

38、g services Part 1: Concepts, architecture and model a specification of the XML Schema specifying the data structures for the catalogue exchange;NOTE The XML schema is described in ISO 16757-5. a description of the relationships to standards of the area of buildingSMART;NOTE The relationships to stan

39、dards of the area of buildingSMART is described in ISO 16757-4. definition of models for specific product groups.NOTE 1 Definitions of models for specific product areas are described in ISO 16757-10 et. seq., the Content Parts of ISO 16757.NOTE 2 All parts are still under development.2 Terms and def

40、initionsFor the purposes of this document, the following terms and definitions apply.2.1accessoryproduct of the same or of different product groups, which can be attached to a productNote 1 to entry: An accessory is not a different type of product, it plays an ancillary role to another product.2.2ac

41、cessory hierarchyrepresentation of the dependencies between products and accessories2.3article numbermanufacturers reference number, GTIN, or other identifier identifying the product or constituents of a product2.4building information modellingBIMconstruction of a model that contains the information

42、 about a building for all phases of the building life cycleNote 1 to entry: In many cases, the abbreviation BIM is also used for the result of the building information modelling, namely the building information model.2.5building servicesutilities and installations supplied and distributed within a b

43、uilding such as electricity, gas, heating, water, and communicationsSOURCE: ISO 16484-22.6building services systemBSStechnical system that provides building services in a buildingSOURCE: ISO 16484-22.7BSS propertytechnical property that describes an aspect of the current state of a BSSNote 1 to entr

44、y: A BSS property cannot get a value in a catalogue because the states of the building services system are not known and will vary according to the specific system and its various system states.DIN ISO 16757-1:2015-09 7 EXAMPLE In the example given in 2.10, media volume flow and media density are BS

45、S properties.2.8catalogue metadatadata in the catalogue which contains data about the catalogue itselfEXAMPLE Catalogue metadata include standard numbers, data for version management, the manufacturers name, and global location number, as well as file check details.2.9descriptive objectobject giving

46、 descriptive and/or visual information about the productEXAMPLE Descriptive objects are pictures, descriptions, videos, etc.2.10dynamic propertytechnical property, that reflects the products behaviour under the operating conditions of the building services system in which the product is installedEXA

47、MPLE The dynamic property pressure loss of a pipe elbow is dependent of the media volume flow and the media density. In a catalogue, the manufacturer of a pipe elbow has to provide a means to allow the determination of the actual pressure loss for various values of media volume flow and media densityNote 1 to entry: A dynamic property does not get a value from a product catalogue because the value of a dynamic property is dependent on the state of the building services system into which t