DIN ISO 16462-2015 Cubic boron nitride inserts tipped or solid - Dimensions types (ISO 16462 2014)《镶片或实心立方形氮化硼镶齿 尺寸、类型(ISO 16462-2014)》.pdf

《DIN ISO 16462-2015 Cubic boron nitride inserts tipped or solid - Dimensions types (ISO 16462 2014)《镶片或实心立方形氮化硼镶齿 尺寸、类型(ISO 16462-2014)》.pdf》由会员分享，可在线阅读，更多相关《DIN ISO 16462-2015 Cubic boron nitride inserts tipped or solid - Dimensions types (ISO 16462 2014)《镶片或实心立方形氮化硼镶齿 尺寸、类型(ISO 16462-2014)》.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、August 2015 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、 25.100.99!%DVI“2335138www.din.deDDIN ISO 16462Cubic boron nitride inserts, tipped or solid Dimensions, types (ISO 16462:2014),English translation of DIN ISO 16462:2015-08Schneidplatten bestckt mit oder ganz aus kubischem Bornitrid Mae, Formen (ISO 16462:2014),Englische bersetzung von DIN ISO 16462:

3、2015-08Plaquettes en nitrure de bore cubique, brases ou monobloc Dimensions, types (ISO 16462:2014),Traduction anglaise de DIN ISO 16462:2015-08SupersedesDIN ISO 16462:2005-11www.beuth.deDocument comprises 21 pagesIn case of doubt, the German-language original shall be considered authoritative.07.15

4、 A comma is used as the decimal marker. Contents PageNational foreword 31 Scope . 42 Normative references 43 Insert shapes and design . 43.1 Insert shapes . 43.2 Normal clearance n. 43.3 Cutting edge corner 43.4 Tolerance class 43.5 Design of cutting edges 53.6 Insert type .54 Designation 54.1 Gener

5、al .54.2 Designation of inserts for turning 54.3 Designation of a tipped insert for milling 55 Dimensions . 65.1 Insert shape T with fixing hole (inserts for turning) . 65.2 Insert shape S with fixing hole (inserts for turning) 75.3 Insert shape C with fixing hole (inserts for turning) . 85.4 Insert

6、 shape D with fixing hole (inserts for turning) . 95.5 Insert shape V with fixing hole (inserts for turning) 105.6 Insert shape S with fixing hole (inserts for milling) 115.7 Insert shape C with fixing hole (inserts for milling) 125.8 Insert shapes C, R, S, and T without fixing hole (inserts for tur

7、ning) . 125.9 Insert shapes S and T without fixing hole (inserts for milling) .145.10 Insert shapes S and T without fixing hole (inserts for milling) . 155.11 Insert shape W with fixing hole (inserts for turning) 165.12 Insert shape W without fixing hole (inserts for turning) 176 Cutting edge length

8、, l1, of tipped inserts .186.1 General 186.2 Inserts with radius 186.3 Inserts with wiper edge .187 Base material, cutting material 198 Measurements 199 Marking .19Annex A (informative) Relationship between designations in ISO 16462 and ISO/TS 13399-2 .20DIN ISO 16462:2015-08 2National Annex NA (inf

9、ormative) Bibliography. 3- National foreword This document (ISO 16462:2014) has been prepared by Technical Committee ISO/TC 29 “Small tools”, Subcommittee SC 9 “Tools with defined cutting edges, cutting items”. The responsible German body involved in its preparation was the DIN-Normenausschuss Werkz

10、euge und Spannzeuge (DIN Standards Committee Tools and Clamping Devices), Working Committee NA 121-01-12 AA Dreh- und Bohrwerkzeuge mit Wendeschneidplatten aus harten Schneidstoffen. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

11、 DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 513 DIN ISO 513 ISO 1832 DIN ISO 1832 ISO 6987 DIN ISO 6987 Amendments This standard differs fr

12、om DIN ISO 16462:2005-11 as follows: a) International Standard ISO 16462:2014 “Cubic boron nitride inserts, tipped or solid Dimensions, types” has been adopted without any modification; b) the standard has been editorially revised. Previous editions DIN ISO 16462: 2005-11 National Annex NA (informat

13、ive) Bibliography DIN ISO 513, Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of application DIN ISO 1832, Indexable inserts for cutting tools Designation DIN ISO 6987, Indexable hard material inserts wi

14、th rounded corners, with partly cylindrical fixing hole Dimensions DIN ISO 16462:2015 083 Cubic boron nitride inserts, tipped or solid Dimensions, types1 ScopeThis International Standard applies to inserts with insert shapes in accordance with ISO 883, ISO 3364, ISO 3365, and ISO 6987, tipped with c

15、ubic boron nitride (BL, BH, BC) or made of solid cubic boron nitride (BL, BH, BC).2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undat

16、ed references, the latest edition of the referenced document (including any amendments) applies.ISO 513, Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of applicationISO 883, Indexable hardmetal (carbide

17、) inserts with rounded corners, without fixing hole DimensionsISO 1832, Indexable inserts for cutting tools DesignationISO 3364, Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole DimensionsISO 3365, Indexable hardmetal (carbide) inserts with wiper edges, withou

18、t fixing hole DimensionsISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole Dimensions3 Insert shapes and design3.1 Insert shapesTriangular (T), square (S), rhombic 80 (C), 55 (D) and 35 (V), round (R), and trigon (W).3.2 Normal clearance nNormal clear

19、ance 0 (N), 5 (B), 7 (C), and 11 (P).3.3 Cutting edge cornerInserts for turning with corner radius r0,2 mm, 0,4 mm, 0,8 mm, 1,2 mm, and 1,6 mm.Inserts for milling with wiper edge.NOTE The design of non-tipped corners is optional.3.4 Tolerance classTolerance class in accordance with ISO 1832 shall be

20、 applied. In Tables 1 to 12, this position is shown with a dot ().DIN ISO 16462:2015-08 4 3.5 Design of cutting edgesAny design shall be indicated in the designation (see ISO 1832).3.6 Insert typeThe styles of tipped or solid cutting edges in accordance with ISO 1832 shall be applied.4 Designation4.

21、1 GeneralThe designation of inserts tipped or solid with cubic boron nitride (BL, BH, BC) is based on ISO 1832. The letter symbol for the cutting edge condition and the letter symbol for the insert type shall be indicated in the designation in each case.Designations contained in 4.2 and 4.3 are exam

22、ples of the use of designations in accordance with ISO 1832.4.2 Designation of inserts for turning4.2.1 Solid insert (S)Designation of a rhombic insert with included angle r= 80 (C), normal clearance n= 0 (N), with tolerance class M, without chip breakers and without fixing hole (N), with side lengt

23、h l = 9,67 mm (09), thickness s = 3,18 mm (03), corner radius r= 0,8 mm (08), with chamfered and rounded cutting edges (S), insert type solid (S), cutting material in accordance with ISO 513 (e.g. BL05):Insert CNMN 090308S S BL05 NOTE BL05 is optional in accordance with ISO 1832, designation symbol

24、13.4.2.2 Insert, tipped full thickness one corner (T)Designation of a rhombic insert with included angle r= 55 (D), normal clearance n= 0 (N), with tolerance class M, without chip breakers and with cylindrical fixing hole (A), with side length l = 15,5 mm (15), thickness s = 4,76 mm (04), corner rad

25、ius r= 0,8 mm (08), with chamfered and rounded cutting edges (S), tipped full thickness one corner (T), long (L), cutting material in accordance with ISO 513 (e.g. BL05):Insert DNMA 150408S TL BL05 NOTE BL05 is optional in accordance with ISO 1832, designation symbol 13.4.3 Designation of a tipped i

26、nsert for millingDesignation of a square insert (S) with normal clearance n= 7 (C), with tolerance class G, without chip breakers and with fixing hole (W), with side length l = 12,7 mm (12), thickness s = 4,76 mm (04), cutting edge angle r= 75 (E), normal clearance at wiper edge = 15 (D), right-hand

27、 type (R), tipped one side one corner (A), long (L), cutting material in accordance with ISO 513 (e.g. BL05):Insert SCGW 1204EDR AL BL05 NOTE BL05 is optional in accordance with ISO 1832, designation symbol 13.DIN ISO 16462:2015-08 5 5 Dimensions5.1 Insert shape T with fixing hole (inserts for turni

28、ng)See Figure 1 and Table 1.NOTE For the dimensions of l1, see Table 13.Figure 1Table 1Designation d d1l m s nrTCW 09 02 02S 5,56 2,5 9,63 8,137 2,38 7 0,2TCW 09 02 04S 5,56 2,5 9,63 7,943 2,38 7 0,4TCW 09 02 08S 5,56 2,5 9,63 7,541 2,38 7 0,8TCW 11 02 02S 6,35 2,8 11 9,322 2,38 7 0,2TCW 11 02 04S 6

29、,35 2,8 11 9,128 2,38 7 0,4TCW 11 02 08S 6,35 2,8 11 8,731 2,38 7 0,8TCW 16 T3 02S 9,525 4,4 16,5 14,084 3,97 7 0,2TCW 16 T3 04S 9,525 4,4 16,5 13,891 3,97 7 0,4TCW 16 T3 08S 9,525 4,4 16,5 13,494 3,97 7 0,8TCW 16 T3 12S 9,525 4,4 16,5 13,097 3,97 7 1,2TCW 16 T3 16S 9,525 4,4 16,5 12,700 3,97 7 1,6T

30、NA 11 03 02S 6,35 2,26 11 9,322 3,18 0 0,2TNA 11 03 04S 6,35 2,26 11 9,128 3,18 0 0,4TNA 11 03 08S 6,35 2,26 11 8,731 3,18 0 0,8TNA 16 04 04S 9,525 3,81 16,5 13,891 4,76 0 0,4TNA 16 04 08S 9,525 3,81 16,5 13,494 4,76 0 0,8TNA 16 04 12S 9,525 3,81 16,5 13,097 4,76 0 1,2TNA 16 04 16S 9,525 3,81 16,5 1

31、2,700 4,76 0 1,6TPW 08 02 02S 4,763 2,3 8,2 6,945 2,38 11 0,2TPW 08 02 04S 4,763 2,3 8,2 6,747 2,38 11 0,4TPW 08 02 08S 4,763 2,3 8,2 6,350 2,38 11 0,8TPW 09 02 02S 5,56 2,5 9,63 8,137 2,38 11 0,2DIN ISO 16462:2015-08 6 Table 1 (continued)Designation d d1l m s nrTPW 09 02 04S 5,56 2,5 9,63 7,943 2,3

32、8 11 0,4TPW 09 02 08S 5,56 2,5 9,63 7,541 2,38 11 0,8TPW 11 02 02S 6,35 2,8 11 8,731 2,38 11 0,2TPW 11 02 04S 6,35 2,8 11 8,137 2,38 11 0,4TPW 11 02 08S 6,35 2,8 11 7,943 2,38 11 0,8TPW 11 03 02S 6,35 3,3 11,0 9,327 3,18 11 0,2TPW 11 03 04S 6,35 3,3 11,0 9,128 3,18 11 0,4TPW 11 03 08S 6,35 3,3 11,0

33、8,731 3,18 11 0,8TPW 16 03 04S 9,525 4,4 16,5 13,891 3,18 11 0,4TPW 16 03 08S 9,525 4,4 16,5 13,494 3,18 11 0,8TPW 16 T3 04S 9,525 4,4 16,5 13,891 3,97 11 0,4TPW 16 T3 08S 9,525 4,4 16,5 13,494 3,97 11 0,8TPW 16 T3 12S 9,525 4,4 16,5 13,097 3,97 11 1,2TPW 16 T3 16S 9,525 4,4 16,5 12,700 3,97 11 1,6T

34、PW 16 04 04S 9,525 4,4 16,5 13,891 4,76 11 0,4TPW 16 04 08S 9,525 4,4 16,5 13,494 4,76 11 0,85.2 Insert shape S with fixing hole (inserts for turning)See Figure 2 and Table 2.NOTE For the dimensions of l1, see Table 13.Figure 2Table 2Designation d d1l m s nrSCW 09 T3 02S 9,525 4,4 9,525 1,889 3,97 7

35、 0,2SCW 09 T3 04S 9,525 4,4 9,525 1,808 3,97 7 0,4SCW 09 T3 08S 9,525 4,4 9,525 1,644 3,97 7 0,8SCW 09 T3 12S 9,525 4,4 9,525 1,479 3,97 7 1,2SCW 12 04 04S 12,7 5,5 12,7 2,466 4,76 7 0,4DIN ISO 16462:2015-08 7 Table 2 (continued)Designation d d1l m s nrSCW 12 04 08S 12,7 5,5 12,7 2,301 4,76 7 0,8SCW

36、 12 04 12S 12,7 5,5 12,7 2,137 4,76 7 1,2SNA 09 03 04S 9,525 3,81 9,525 1,808 3,18 0 0,4SNA 09 03 08S 9,525 3,81 9,525 1,644 3,18 0 0,8SNA 09 03 12S 9,525 3,81 9,525 1,479 3,18 0 1,2SNA 12 04 04S 12,7 5,16 12,7 2,466 4,76 0 0,4SNA 12 04 08S 12,7 5,16 12,7 2,301 4,76 0 0,8SNA 12 04 12S 12,7 5,16 12,7

37、 2,137 4,76 0 1,2SNA 12 04 16S 12,7 5,16 12,7 1,972 4,76 0 1,65.3 Insert shape C with fixing hole (inserts for turning)See Figure 3 and Table 3.NOTE For the dimensions of l1, see Table 13.Figure 3Table 3Designation d d1l m1m2s nrCCW 06 02 02S 6,35 2,8 6,45 1,652 0,908 2,38 7 0,2CCW 06 02 04S 6,35 2,

38、8 6,45 1,544 0,848 2,38 7 0,4CCW 06 02 08S 6,35 2,8 6,45 1,323 0,727 2,38 7 0,8CCW 09 T3 02S 9,525 4,4 9,67 2,535 1,392 3,97 7 0,2CCW 09 T3 04S 9,525 4,4 9,67 2,426 1,333 3,97 7 0,4CCW 09 T3 08S 9,525 4,4 9,67 2,206 1,212 3,97 7 0,8CCW 09 T3 12S 9,525 4,4 9,67 1,985 1,091 3,97 7 1,2CCW 12 04 04S 12,

39、7 5,5 12,9 3,308 1,818 4,76 7 0,4CCW 12 04 08S 12,7 5,5 12,9 3,088 1,697 4,76 7 0,8CCW 12 04 12S 12,7 5,5 12,9 2,867 1,576 4,76 7 1,2CCW 12 04 16S 12,7 5,5 12,9 2,646 1,454 4,76 7 1,6DIN ISO 16462:2015-08 8 Table 3 (continued)Designation d d1l m1m2s nrCNA 09 03 04S 9,525 3,81 9,67 2,426 1,333 3,18 0

40、 0,4CNA 09 03 08S 9,525 3,81 9,67 2,206 1,212 3,18 0 0,8CNA 12 04 04S 12,7 5,16 12,9 3,308 1,818 4,76 0 0,4CNA 12 04 08S 12,7 5,16 12,9 3,088 1,697 4,76 0 0,8CNA 12 04 12S 12,7 5,16 12,9 2,867 1,576 4,76 0 1,2CNA 12 04 16S 12,7 5,16 12,9 2,646 1,454 4,76 0 1,6CPW 06 02 02S 6,35 2,8 6,45 1,652 0,908

41、2,38 11 0,2CPW 06 02 04S 6,35 2,8 6,45 1,544 0,848 2,38 11 0,4CPW 06 02 08S 6,35 2,8 6,45 1,323 0,727 2,38 11 0,8CPW 09 03 02S 9,525 4,4 9,67 2,534 1,392 3,18 11 0,2CPW 09 03 04S 9,525 4,4 9,67 2,426 1,333 3,18 11 0,4CPW 09 03 08S 9,525 4,4 9,67 2,206 1,212 3,18 11 0,8CPW 09 T3 02S 9,525 4,4 9,67 2,

42、534 1,392 3,97 11 0,2CPW 09 T3 04S 9,525 4,4 9,67 2,426 1,333 3,97 11 0,4CPW 09 T3 08S 9,525 4,4 9,67 2,206 1,212 3,97 11 0,8CPW 09 T3 12S 9,525 4,4 9,67 1,985 1,091 3,97 11 1,25.4 Insert shape D with fixing hole (inserts for turning)See Figure 4 and Table 4.NOTE For the dimensions of l1, see Table

43、13.Figure 4DIN ISO 16462:2015-08 9 Table 4Designation d d1l m s nrDCW 07 02 02S 6,35 2,8 7,75 3,464 2,38 7 0,2DCW 07 02 04S 6,35 2,8 7,75 3,238 2,38 7 0,4DCW 07 02 08S 6,35 2,8 7,75 2,776 2,38 7 0,8DCW 11 T3 02S 9,525 4,4 11,6 5,315 3,97 7 0,2DCW 11 T3 04S 9,525 4,4 11,6 5,089 3,97 7 0,4DCW 11 T3 08

44、S 9,525 4,4 11,6 4,626 3,97 7 0,8DCW 11 T3 12S 9,525 4,4 11,6 4,164 3,97 7 1,2DNA 11 04 04S 9,525 3,81 11,6 5,089 4,76 0 0,4DNA 11 04 08S 9,525 3,81 11,6 4,626 4,76 0 0,8DNA 15 04 04S 12,7 5,16 15,5 6,939 4,76 0 0,4DNA 15 04 08S 12,7 5,16 15,5 6,477 4,76 0 0,8DNA 15 04 12S 12,7 5,16 15,5 6,014 4,76

45、0 1,2DNA 15 06 04S 12,7 5,16 15,5 6,939 6,35 0 0,4DNA 15 06 08S 12,7 5,16 15,5 6,477 6,35 0 0,8DNA 15 06 12S 12,7 5,16 15,5 6,014 6,35 0 1,2DNA 15 06 16S 12,7 5,16 15,5 5,551 6,35 0 1,65.5 Insert shape V with fixing hole (inserts for turning)See Figure 5 and Table 5.NOTE For the dimensions of l1, se

46、e Table 13.Figure 5Table 5Designation d d1l m s nrVCW 11 03 02S 6,35 2,8 11,1 6,911 3,18 7 0,2VCW 11 03 04S 6,35 2,8 11,1 6,460 3,18 7 0,4VCW 11 03 08S 6,35 2,8 11,1 5,537 3,18 7 0,8VCW 16 04 02S 9,525 4,4 16,6 10,603 4,76 7 0,2VCW 16 04 04S 9,525 4,4 16,6 10,154 4,76 7 0,4VCW 16 04 08S 9,525 4,4 16,6