DIN EN ISO 28927-6-2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6 Rammers (ISO 28927-6 2009) German version EN ISO 28927-6 2009《手持.pdf

《DIN EN ISO 28927-6-2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6 Rammers (ISO 28927-6 2009) German version EN ISO 28927-6 2009《手持.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 28927-6-2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6 Rammers (ISO 28927-6 2009) German version EN ISO 28927-6 2009《手持.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、May 2010 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17

2、.160; 25.140.01!$bW6“1635219www.din.deDDIN EN ISO 28927-6Hand-held portable power tools Test methods for evaluation of vibration emission Part 6: Rammers (ISO 28927-6:2009)English translation of DIN EN ISO 28927-6:2010-05Handgehaltene motorbetriebene Maschinen Messverfahren zur Ermittlung der Schwin

3、gungsemission Teil 6: Stampfer (ISO 28927-6:2009)Englische bersetzung von DIN EN ISO 28927-6:2010-05Machines moteur portatives Mthodes dessai pour lvaluation de lmission de vibrations Partie 6: Marteaux fouloirs (ISO 28927-6:2009)Traduction anglaise de DIN EN ISO 28927-6:2010-05SupersedesDIN EN ISO

4、8662-9:1997-03www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 26 pages05.10 DIN EN ISO 28927-6:2010-05 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 118 “Compres

5、sors and pneumatic tools, machines and equipment”, Subcommittee SC 3 “Pneumatic tools and machines” in collaboration with Technical Committee CEN/TC 231 “Mechanical vibration and shock” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Akust

6、ik, Lrmminderung und Schwingungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-03-07-02 (NALS/VDI C 7.2) Hand-Arm-Schwingungen. In DIN 45679, “feed force” is force applied by only one hand; in ISO 15230 feed fo

7、rce refers to both hands (there it is defined as the “sum of the push force of both hands”). In the present standard, in cases where a machine is operated with both hands “feed force” is to be taken to mean the sum of the force of both hands. The DIN Standards corresponding to the International Stan

8、dards referred to in the EN are as follows: ISO 5349 series DIN EN ISO 5349 series ISO 8662-11 DIN ISO/TS 8662-11 ISO 8662-13 DIN ISO/TS 8662-13 ISO 12100 DIN EN ISO 12100 ISO 20643 DIN EN ISO 20643 IEC 60745 series DIN EN 60745 series The national standards are given in Annex NA “Bibliography”. Ame

9、ndments This standard differs from DIN EN ISO 8662-9:1997-03 as follows: a) Vibrations are measured in three axes and at both hand positions. b) New transducer locations have been specified for the measurements. c) The directions of measurement have been modified. Previous editions DIN EN ISO 8662-9

10、: 1997-03 DIN EN ISO 28927-6:2010-05 3 National Annex NA (informative) Bibliography DIN 45679, Mechanical vibration Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration DIN EN 60745 (all parts), Hand-held motor-operated electric tools

11、Safety DIN EN ISO 5349 (all parts), Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration DIN EN ISO 8662-13, Hand-held portable power tools Measurement of vibrations at the handle Part 13: Die grinders DIN EN ISO 12100, Safety of machinery General principle

12、s for design, risk assessment and risk reduction DIN EN ISO 20643, Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission DIN ISO/TS 8662-11, Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools (nail

13、ers) ISO 15230, Mechanical vibration and shock Coupling forces at the man-machine interface for hand-transmitted vibration DIN EN ISO 28927-6:2010-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 28927-6 December 2009 ICS 13.160; 25.140.10 Supersedes EN

14、ISO 8662-9:1996English Version Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) Machines moteur portatives - Mthodes dessai pour lvaluation de lmission de vibrations - Partie 6: Marteaux fouloirs (ISO 28927-6:2009) Handgehaltene

15、motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 6: Stampfer (ISO 28927-6:2009) This European Standard was approved by CEN on 14 December 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving t

16、his European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official version

17、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, B

18、ulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STAND

19、ARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 28927-6:2009: EContents DIN EN ISO 28927-6:2010-

20、05 EN ISO 28927-6:2009 (E) 2 Page Foreword .3 Introduction.4 1 Scope5 2 Normative references5 3 Terms, definitions and symbols 6 3.1 Terms and definitions .6 3.2 Symbols6 4 Basic standards and vibration test codes 6 5 Description of the family of machines 6 6 Characterization of vibration8 6.1 Direc

21、tion of measurement 8 6.2 Location of measurements.8 6.3 Magnitude of vibration9 6.4 Combination of vibration directions9 7 Instrumentation requirements .9 7.1 General .9 7.2 Mounting of transducers 9 7.3 Frequency weighting filter10 7.4 Integration time10 7.5 Auxiliary equipment 10 7.6 Calibration1

22、0 8 Testing and operating conditions of the machinery10 8.1 General .10 8.2 Operating conditions 11 8.3 Other quantities to be specified.11 8.4 Attached equipment, work piece and task11 8.5 Operators .13 9 Measurement procedure and validity13 9.1 Reported vibration values 13 9.2 Declaration and veri

23、fication of the vibration emission value .13 10 Measurement report14 Annex A (informative) Model test report for vibration emission of rammers.15 Annex B (normative) Determination of uncertainty 17 Annex C (normative) Design of energy absorbers for rammers19 Bibliography20 Annex ZA (informative) Rel

24、ationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC .21 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC22 Foreword DIN EN ISO 28927-6:2010-05 EN IS

25、O 28927-6:2009 (E) 3 This document (EN ISO 28927-6:2009) has been prepared by Technical Committee ISO/TC 118 CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an ident

26、ical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respon

27、sible for identifying any or all such patent rights. This document supersedes EN ISO 8662-9:1996. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives. For relationship wi

28、th EU Directives, see informative Annex ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Re

29、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 28927-6:2009 h

30、as been approved by CEN as a EN ISO 28927-6:2009 without any modification. “Compressors and pneumatic tools, machines and equipment” in collaboration with Technical Committee Introduction This document is a type-C standard as stated in ISO 12100. When requirements of this type-C standard are differe

31、nt from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. The vibration test codes for portable

32、hand-held machines given in ISO 28927 are based on ISO 20643, which gives general specifications for the measurement of the vibration emission of hand-held and hand-guided machinery. ISO 28927 specifies the operation of the machines under type-test conditions and other requirements for the performan

33、ce of type tests. The structure/numbering of its clauses follows that of ISO 20643. The basic principle for transducer positioning first introduced in the EN 60745 series of European standards is followed, representing a deviation from ISO 20643 for reasons of consistency. The transducers are primar

34、ily positioned next to the hand in the area between the thumb and the index finger, where they give the least disturbance to the operator gripping the machine. It has been found that vibrations generated by rammers vary considerably in typical use. For rammers, the percussion action is the source of

35、 vibration, and the variation is largely due to variations in the handling of the rammer and the damping characteristics of the material worked on. In order to provide a method that gives good measurement reproducibility, this part of ISO 28927 uses a working process where the rammer is used on an e

36、nergy absorber, thereby giving damping characteristics that will be constant over time. The procedures of ISO 5349 are required whenever exposure at the workplace is to be assessed. The values obtained are type-test values intended to be representative of the average of the upper quartile of typical

37、 vibration magnitudes in real-world use of the machines. However, the actual magnitudes will vary considerably from time to time and depend on many factors, including the operator, the task and the inserted tool or consumable. The state of maintenance of the machine itself might also be of importanc

38、e. Under real working conditions the influences of the operator and process can be particularly important at low magnitudes. It is therefore not recommended that emission values below 2,5 m/s2be used for estimating the vibration magnitude under real working conditions. In such cases, 2,5 m/s2is the

39、recommended vibration magnitude for estimating the machine vibration. If accurate values for a specific work place are required, then measurements (according to ISO 5349) in that work situation could be necessary. Vibration values measured in real working conditions can be either higher or lower tha

40、n the values obtained using this part of ISO 28927. Higher vibration magnitudes can easily occur in real work situations, caused by an improper combination of butt and rammed material. The vibration test codes given in ISO 28927 supersede those given in ISO 8662, whose parts have been replaced by th

41、e corresponding parts of ISO 28927 (see Foreword). NOTE ISO 8662-11, Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools, and ISO 8662-13, Hand-held portable power tools Measurement of vibrations at the handle Part 13: Die grinders, could be replace

42、d by future parts of ISO 28927. DIN EN ISO 28927-6:2010-05 EN ISO 28927-6:2009 (E) 4 1 Scope This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven rammers. It is a type-test procedure for establishing the magn

43、itude of vibration in the gripping areas of a machine run under specified test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to rammers, back-fill rammers, pawing rammers, sand rammers and stampers (s

44、ee Clause 5), driven pneumatically or by other means, intended for use in foundries, on building sites, etc., and with, for example, butts or peens made of cast iron or rubber, used for ramming of casting sand or in stamping work. NOTE To avoid confusion with the terms “power tool” and “inserted too

45、l”, machine is used for the former throughout this document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (

46、including any amendments) applies. ISO 2787:1984, Rotary and percussive pneumatic tools Performance tests ISO 5349:2001 (all parts), Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration ISO 5391:2003, Pneumatic tools and machines Vocabulary ISO 17066:2007,

47、Hydraulic tools Vocabulary ISO 20643:2005, Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission EN 12096:1997, Mechanical vibration Declaration and verification of vibration emission values DIN EN ISO 28927-6:2010-05 EN ISO 28927-6:2009 (E) 5 3 Ter

48、ms, definitions and symbols For the purposes of this document, the terms and definitions given in ISO 5391, ISO 17066 and ISO 20643, and the following terms, definitions and symbols, apply. 3.1 Terms and definitions 3.1.1 rammer backfill tamper percussive machine for compressing earth, casting sand,

49、 etc. NOTE Adapted from ISO 5391:2003, definition 2.2.8. 3.2 Symbols Symbol Description Unit ahwroot-mean-square (r.m.s.) single-axis acceleration value of the frequency-weighted hand-transmitted vibration m/s2ahvvibration total value of frequency-weighted r.m.s. acceleration; root sum of squares of ahwvalues for the three measured axes of vibration m/s2hva arithmetic mean value of ahvvalues of runs for single operator using one hand position m/s2aharithmetic mean value of hva values for all operators for one