DIN EN ISO 28927-11-2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11 Stone hammers (ISO 28927-11 2011) German version EN ISO 28927-.pdf

《DIN EN ISO 28927-11-2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11 Stone hammers (ISO 28927-11 2011) German version EN ISO 28927-.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 28927-11-2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11 Stone hammers (ISO 28927-11 2011) German version EN ISO 28927-.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、May 2011 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17

2、.160; 25.140.01!$phr“1776979www.din.deDDIN EN ISO 28927-11Hand-held portable power tools Test methods for evaluation of vibration emission Part 11: Stone hammers (ISO 28927-11:2011)English translation of DIN EN ISO 28927-11:2011-05Handgehaltene motorbetriebene Maschinen Messverfahren zur Ermittlung

3、der Schwingungsemission Teil 11: Steinbearbeitungsmaschinen (ISO 28927-11:2011)Englische bersetzung von DIN EN ISO 28927-11:2011-05Machines moteur portatives Mthodes dessai pour lvaluation de lmission de vibrations Partie 11: Casse-pierres (ISO 28927-11:2011)Traduction anglaise de DIN EN ISO 28927-1

4、1:2011-05Together withsupersedesDIN EN ISO 8662-14:1997-03www.beuth.deDocument comprises 27 pagesIn case of doubt, the German-language original shall be considered authoritative.DIN EN ISO 28927-9:2010-05,05.11 DIN EN ISO 28927-11:2011-05 2 A comma is used as the decimal marker. National foreword Th

5、is standard has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment”, Subcommittee SC 3 “Pneumatic tools and machines” in collaboration with Technical Committee CEN/TC 231 “Mechanical vibration and shock” (Secretariat: DIN, Germany). The responsib

6、le German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-03-07-02 (NALS/VDI C 7.2) Hand-Arm-Schwingungen. This stand

7、ard only deals with stone hammers and engraving pens; for scaling hammers and needle scalers see DIN EN ISO 28927-9. In DIN 45679, “feed force” is force applied by only one hand; in ISO 15230 feed force refers to both hands (there it is defined as the “sum of the push force of both hands”). In the p

8、resent standard, in cases where a machine is operated with both hands “feed force” is to be taken to mean the sum of the force of both hands. In the Introduction, it is stated that the basic principle for transducer positioning in accordance with EN 60745 has been adopted, which represents a deviati

9、on from ISO 20643:2005. This approach is included in Amendment 1 to ISO 20643:2005. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 5349 (all parts) DIN EN ISO 5349 (all parts) ISO 8662-11 DIN ISO/TS 8662-11 ISO 12100 DIN EN ISO 12100 I

10、SO 20643 DIN EN ISO 20643 EN 60745 (all parts) DIN EN 60745 (all parts) The German Standards are given in National Annex NA “Bibliography”. Standards designated EN xxx are identical to German Standards designated DIN EN xxx. Amendments This standard differs from DIN EN ISO 8662-14:1997-03 as follows

11、: a) the standard covers only stone hammers; b) vibrations are measured in three axes and at both hand positions; c) new transducer locations have been specified for the measurements; d) the directions of measurement have been modified; e) the energy absorber has been deleted and all tools are teste

12、d on stone. Previous editions DIN EN ISO 8662-14:1997-03 DIN EN ISO 28927-11:2011-05 3 National Annex NA (informative) Bibliography DIN 45679, Mechanical vibration Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration DIN EN 60745 (all

13、parts), Hand-held motor-operated electric tools Safety DIN EN ISO 5349-1, Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements DIN EN ISO 5349-2, Mechanical vibrations Measurement and evaluation of human exposure to hand-transmi

14、tted vibration Part 2: Practical guidance for measurement at the workplace DIN EN ISO 12100, Safety of machinery General principles for design Risk assessment and risk reduction DIN EN ISO 20643, Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission

15、 DIN EN ISO 28927-9, Hand-held portable power tools Test methods for evaluation of vibration emission Part 9: Scaling hammers and needle scalers DIN ISO/TS 8662-11, Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools ISO 15230, Mechanical vibration

16、and shock Coupling forces at the man-machine interface for hand-transmitted vibration DIN EN ISO 28927-11:2011-05 4 This page is intentionally blank NORME EUROPENNE EUROPISCHE NORM February 2011 ICS 25.140.10; 13.160 Supersedes EN ISO 8662-14:1996English Version Hand-held portable power tools Test m

17、ethods for evaluation of vibration emission Part 11: Stone hammers (ISO 28927-11:2011) Machines moteur portatives Mthodes dessai pour lvaluation de lmission de vibrations Partie 11: Casse-pierres (ISO 28927-11:2011) Handgehaltene motorbetriebene Maschinen Messverfahren zur Ermittlung der Schwingungs

18、emission Teil 11: Steinbearbeitungsmaschinen (ISO 28927-11:2011)This European Standard was approved by CEN on 29 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

19、without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any ot

20、her language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic

21、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NOR

22、MALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 28927-11:2011: EEUROPEAN STANDARD EN ISO 28927-11 Contents Page Foreword3 Intro

23、duction .4 1 Scope 5 2 Normative references 5 3 Terms, definitions and symbols.5 3.1 Terms and definitions .6 3.2 Symbols 6 4 Basic standards and vibration test codes 6 5 Description of the family of machines.7 6 Characterization of vibration8 6.1 Direction of measurement 8 6.2 Location of measureme

24、nts .8 6.3 Magnitude of vibration 10 6.4 Combination of vibration directions10 7 Instrumentation requirements11 7.1 General11 7.2 Mounting of transducers.11 7.3 Frequency weighting filter 11 7.4 Integration time11 7.5 Auxiliary equipment 12 7.6 Calibration 12 8 Testing and operating conditions of th

25、e machinery12 8.1 General12 8.2 Operating conditions.12 8.3 Other quantities to be specified.13 8.4 Attached equipment, workpiece and task.13 8.5 Operator15 9 Measurement procedure and validity 15 9.1 Reported vibration values.15 9.2 Declaration and verification of the vibration emission value .16 1

26、0 Test report 16 Annex A (informative) Model test report for vibration emission of stone hammers18 Annex B (normative) Determination of uncertainty.20 Bibliography 22 2 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 23 EN

27、ISO 28927-11:2011 (E) DIN EN ISO 28927-11:2011-05 Foreword This document (EN ISO 28927-11:2011) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment” in collaboration with Technical Committee CEN/TC 231 “Mechanical vibration and shock” the secr

28、etariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn

29、 to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 8662-14:1996. This document has been prepared under a mandate given to C

30、EN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standa

31、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po

32、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 28927-11:2011 has been approved by CEN as a EN ISO 28927-11:2011 without any modification. 3 EN ISO 28927-11:2011 (E) DIN EN ISO 28927-11:2011-05 Introduction This docum

33、ent is a type-C standard as stated in ISO 12100. When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed a

34、nd built according to the requirements of this type-C standard. The vibration test codes for portable hand-held machines given in ISO 28927 (all parts) are based on ISO 20643, which gives general specifications for the measurement of the vibration emission of hand-held and hand-guided machinery. ISO

35、 28927 (all parts) specifies the operation of the machines under type-test conditions and other requirements for the performance of type tests. The structure/numbering of its clauses follows that of ISO 20643. The basic principle for transducer positioning first introduced in the IEC 60745 series of

36、 European standards is followed, representing a deviation from ISO 20643 for reasons of consistency. The transducers are primarily positioned next to the hand in the area between the thumb and the index finger, where they give the least disturbance to the operator gripping the machine. It has been f

37、ound that vibrations generated by stone hammers vary considerably in typical use. For stone hammers, impacting action is the prime source of vibration. The variation is largely due to variations in the handling of the machine and the characteristics of the material to work on. Differences in the sup

38、port of the material also cause differences in vibration. This part of ISO 28927 uses a working process where the machine is used to work on a stone surface. To improve reproducibility of the test, it is important that the material has good support and that inserted tools used are in good condition.

39、 The values obtained are type-test values intended to be representative of the average of the upper quartile of typical vibration magnitudes in real-world use of the machines. However, the actual magnitudes vary considerably from time to time and depend on many factors, including the operator, the t

40、ask and the inserted tool or consumable. The state of maintenance of the machine itself might also be of importance. Under real working conditions the influences of the operator and process can be particularly important at low magnitudes. It is therefore not recommended that emission values below 2,

41、5 m/s2be used for estimating the vibration magnitude under real working conditions. In such cases, 2,5 m/s2is the recommended vibration magnitude for estimating the machine vibration. If accurate values for a specific work place are required, then measurements according to ISO 5349 (all parts) in th

42、at work situation could be necessary. Vibration values measured in real working conditions can be either higher or lower than the values obtained using this part of ISO 28927. Higher vibration magnitudes can easily occur in real work situations, caused by the use of excessively worn inserted tools.

43、The vibration test codes given in ISO 28927 (all parts) supersede those given in ISO 8662 (all parts), which has been replaced by the corresponding parts of ISO 28927 (see Foreword). NOTE ISO 8662-11, Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving to

44、ols, could be replaced by a future part of ISO 28927. 4 EN ISO 28927-11:2011 (E) DIN EN ISO 28927-11:2011-05 1 Scope This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held stone hammers. It is a type-test procedure for estab

45、lishing the magnitude of vibration in the gripping areas of a stone hammer when operated in laboratory conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to engraving pens and stone hammers intended for us

46、e by stone masons (see Clause 5), driven pneumatically or by other means. It is not applicable to demolition hammers or to chipping hammers primarily intended for use on metal or in construction. NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter f

47、or the former. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2787, R

48、otary and percussive pneumatic tools Performance tests ISO 5349, (all parts), Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration ISO 5391:2003, Pneumatic tools and machines Vocabulary ISO 17066, Hydraulic tools Vocabulary ISO 20643:2005, Mechanical vibrat

49、ion Hand-held or hand-guided machinery Principles for evaluation of vibration emission EN 12096, Mechanical vibration Declaration and verification of vibration emission values 3 Terms, definitions and symbols For the purposes of this document, the terms and definitions given in ISO 5391, ISO 17066 and ISO 20643 and the following apply. 5 EN ISO 28927-11:2011 (E) DIN EN ISO 28927-11:2011-05 3.1 Terms and definitions 3.1.1 stone hammer percussive machine for carving and chipping stone NOTE Adap