DIN EN ISO 8502-3-2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3 Assessment of du.pdf

《DIN EN ISO 8502-3-2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3 Assessment of du.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 8502-3-2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3 Assessment of du.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、May 2017 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.220.10!%d“2659657www.din.deDIN EN

2、 ISO 8502-3Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel surfaces prepared for painting (pressuresensitive tape method) (ISO 85023:2017);English version EN ISO 85023:2017,English t

3、ranslation of DIN EN ISO 8502-3:2017-05Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen Prfungen zum Beurteilen der Oberflchenreinheit Teil 3: Beurteilung von Staub auf fr das Beschichten vorbereiteten Stahloberflchen (KlebebandVerfahren) (ISO 85023:2017);Englische Fassung

4、 EN ISO 85023:2017,Englische bersetzung von DIN EN ISO 8502-3:2017-05Prparation des subjectiles dacier avant application de peintures et de produits assimils Essais pour apprcier la propret dune surface Partie 3: valuation de la poussire sur les surfaces dacier prpares pour la mise en peinture(mthod

5、e du ruban adhsif sensible la pression) (ISO 85023:2017);Version anglaise EN ISO 85023:2017,Traduction anglaise de DIN EN ISO 8502-3:2017-05SupersedesDIN EN ISO 85023:199906www.beuth.deDocument comprises 18 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall

6、be considered authoritative.05.17 DIN EN ISO 8502-3:2017-05 2 A comma is used as the decimal marker. National foreword This document (EN ISO 8502-3:2017) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnish

7、es” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Beschichtungsstoffe und Beschichtungen (DIN Standards Committee Coatings and Coating Materials), Working Committees NA 002-00-10-04 UA “Surface preparation and testing” and NA 002-00-10 A

8、A “Corrosion protection of steel structures”. DIN EN ISO 8502 consists of the following parts, under the general title Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness: Part 2: Laboratory determination of chloride on cl

9、eaned surfaces Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape) Part 4: Guidance on the estimation of the probability of condensation prior to paint application Part 5: Measurement of chloride on steel surfaces prepared for painting Part 6: Extraction of s

10、oluble contaminants for analysis The Bresle method Part 9: Field method for the conductometric determination of water-soluble salts Part 11: Field method for the turbidimetric determination of water-soluble sulfate Part 12: Field method for the titrimetric determination of water-soluble ferrous ions

11、 The DIN Standards corresponding to the International Standards referred to in this document are follows: ISO 4628-1 DIN EN ISO 4628-1 ISO 8501-1 DIN EN ISO 8501-1 IEC 60454-2 DIN EN 60454-2 Amendments This standard differs from DIN EN ISO 8502-3:1999-06 as follows: a) in Clause 2 and 5.1, IEC 454-2

12、 has been replaced by IEC 60454-2; b) in Table 1, the decimal sign has been changed to a decimal comma; c) Figure A.4 has been included and the former Figure A.4 has been renamed Figure A.5; d) the standard has been editorially revised. Previous editions DIN EN ISO 8502-3: 1999-06 DIN EN ISO 8502-3:

13、2017-05 3 National Annex NA (informative) Bibliography DIN EN ISO 4628-1, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering DIN EN ISO 8501-1, Preparatio

14、n of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings DIN EN 60454-2, Pressure-sensitive adhesive tape

15、s for electrical purposes Part 2: Methods of test DIN EN ISO 8502-3:2017-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8502-3 February 2017 ICS 25.220.10 Supersedes EN ISO 8502-3:1999English Version Preparation of steel substrates before application o

16、f paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017) Prparation des subjectiles dacier avant application de peintures et de produits assimils - Essais po

17、ur apprcier la propret dune surface - Partie 3: valuation de la poussire sur les surfaces dacier prpares pour la mise en peinture (mthode du ruban adhsif sensible la pression) (ISO 8502-3:2017) Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Prfungen zum Beurteilen der

18、Oberflchenreinheit - Teil 3: Beurteilung von Staub auf fr das Beschichten vorbereiteten Stahloberflchen (Klebeband-Verfahren) (ISO 8502-3:2017) This European Standard was approved by CEN on 30 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

19、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standar

20、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nation

21、al standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbi

22、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by a

23、ny means reserved worldwide for CEN national Members. Ref. No. EN ISO 8502-3:2017 EForeword .4Introduction .51 Scope . 72 Normative references 73 Terms and definitions . 74 Principle 75 Apparatus and materials 86 Procedure. 87 Test report 10Annex A (informative) Spring-loaded roller 11Bibliography .

24、14Contents PageEuropean foreword .3EN ISO 8502-3:2017 (E) DIN EN ISO 8502-3:2017-05 2 European foreword This document (EN ISO 8502-3:2017) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secreta

25、riat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at the latest by August 2017. Attention is drawn to

26、 the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 8502-3:1999. According to the CEN-CENELEC Internal Regulations, the nationa

27、l standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua

28、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 8502-3:2017 has been approved by CEN as EN ISO 8502-3:2017 without any modification. EN ISO 8502-3:2017 (E

29、) DIN EN ISO 8502-3:2017-05 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interest

30、ed in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Co

31、mmission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents

32、 should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible

33、 for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for

34、 the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (

35、TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was developed by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products.This second edition cancels and replaces the first

36、edition (ISO 8502-3:1992), which has been technically revised with the following changes:a) in Clause 2 and 5.1, IEC 454-2 has been substituted with IEC 60454-2;b) in Table 1, decimal sign has been changed to a decimal comma;c) Figure A.4 has been added and the former Figure A.4 has been renamed Fig

37、ure A.5;d) the document has been editorially revised.ISO 8502 consists of the following parts, under the general title Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness: Part 2: Laboratory determination of chloride on cl

38、eaned surfaces Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) Part 4: Guidance on the estimation of the probability of condensation prior to paint application Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection t

39、ube method) Part 6: Extraction of soluble contaminants for analysis The Bresle method Part 9: Field method for the conductometric determination of water-soluble salts Part 11: Field method for the turbidimetric determination of water-soluble sulfate Part 12: Field method for the titrimetric determin

40、ation of water-soluble ferrous ionsEN ISO 8502-3:2017 (E) DIN EN ISO 8502-3:2017-05 4 IntroductionThe performance of protective coatings of paint and related products applied to steel is significantly affected by the state of the steel surface immediately prior to painting. The principal factors tha

41、t are known to influence this performance are as follows:a) presence of rust and mill scale;b) presence of surface contaminants, including salts, dust, oils and greases;c) surface profile.The ISO 8501, ISO 8502 and ISO 8503 series of International Standards have been prepared to provide methods of a

42、ssessing these factors, while the ISO 8504 series provides guidance on the preparation methods that are available for cleaning steel substrates, indicating the capabilities of each in attaining specified levels of cleanliness.These series of International Standards do not contain recommendations for

43、 the protective coating systems to be applied to the steel surface. Neither do they contain recommendations for the surface quality requirements for specific situations even though surface quality can have a direct influence on the choice of protective coating to be applied and on its performance. S

44、uch recommendations are found in other documents such as national standards and codes of practice. It will be necessary for the users of these International Standards to ensure that the qualities specified are compatible and appropriate both for the environmental conditions to which the steel will b

45、e exposed and for the protective coating system to be used, and within the capability of the cleaning procedure specified.The four series of International Standards referred to above deal with the following aspects of preparation of steel substrates before application of paints and related products:

46、 ISO 8501 on visual assessment of surface cleanliness; ISO 8502 on tests for the assessment of surface cleanliness; ISO 8503 on surface roughness characteristics of blast-cleaned steel substrates; ISO 8504 on surface preparation methods.Each of these International Standards is in turn divided into s

47、eparate parts.This part of ISO 8502 describes a procedure for the assessment, using a pressure-sensitive tape method, of the quantity and the particle size of dust on steel surfaces prepared for painting.In the painting schedule requirements of contractual documents giving details of surface prepara

48、tion by blast-cleaning, it is normally specified that all surfaces shall be free from surface contamination including oil, grease, dirt, dust and water-soluble salts.Dust on blast-cleaned steel surfaces can reduce the adhesion of subsequently applied organic coatings and, by absorbing moisture, might promote the corrosion of the blast-cleaned steel surfaces. Accumulation of dust more naturally occurs on horizontal surfaces, the interior of pipes, and in