DIN EN ISO 6134-2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134 2017) German version EN ISO 6134 2017《饱和蒸汽用橡胶软管和软管组件 规范(ISO 6134-2017) 德文版本 EN I.pdf

《DIN EN ISO 6134-2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134 2017) German version EN ISO 6134 2017《饱和蒸汽用橡胶软管和软管组件 规范(ISO 6134-2017) 德文版本 EN I.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 6134-2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134 2017) German version EN ISO 6134 2017《饱和蒸汽用橡胶软管和软管组件 规范(ISO 6134-2017) 德文版本 EN I.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、June 2017 English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.040.70!%e“2666158www.din.deDIN E

2、N ISO 6134Rubber hoses and hose assemblies for saturated steam Specification (ISO 6134:2017);English version EN ISO 6134:2017,English translation of DIN EN ISO 6134:2017-06Gummischluche und schlauchleitungen fr gesttigten Dampf Spezifikation (ISO 6134:2017);Englische Fassung EN ISO 6134:2017,Englisc

3、he bersetzung von DIN EN ISO 6134:2017-06Tuyaux et flexibles en caoutchouc pour vapeur sature Spcification (ISO 6134:2017);Version anglaise EN ISO 6134:2017,Traduction anglaise de DIN EN ISO 6134:2017-06SupersedesDIN EN ISO 6134:200602www.beuth.deDocument comprises 20 pagesDTranslation by DIN-Sprach

4、endienst.In case of doubt, the German-language original shall be considered authoritative.06.17 DIN EN ISO 6134:2017-06 2 A comma is used as the decimal marker. National foreword This document (EN ISO 6134:2017) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” in colla

5、boration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was DIN-Normenausschuss Elastomer-Technik (DIN Standards Committee Elastomer Technology), Working Committee NA 045-

6、02-12 AA “Rubber and plastics hoses and hose assemblies (Mirror committee to CEN/TC 218; ISO/TC 45/SC 1)”. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 37 DIN 53504 ISO 188 DIN 53508 ISO 1402 DIN EN ISO 1402 ISO 1817 DIN ISO 1817 ISO

7、 4023:2009 DIN EN ISO 4023:2010 ISO 4649:2010 DIN ISO 4649:2014 ISO 4671 DIN EN ISO 4671 ISO 7326:2006 DIN EN ISO 7326:2009 ISO 8031:2009 DIN EN ISO 8031:2010 ISO 8033 DIN EN ISO 8033 ISO 8330 DIN EN ISO 8330 ISO 10619-1:2011 DIN EN ISO 10619-1:2012 Amendments This standard differs from DIN EN ISO 6

8、134:2006-02 as follows: a) the standard has been editorially and technically revised (minor revision); b) Clause 2 has been updated. Previous editions DIN 2825-1: 1994-02 DIN 2825-1 Supplement 1: 1994-02 DIN 2825-2: 1994-02 DIN EN ISO 6134: 2006-02 DIN EN ISO 6134:2017-06 3 National Annex NA (inform

9、ative) Bibliography DIN 53504, Testing of rubber Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test DIN 53508, Testing of rubber Accelerated ageing DIN EN ISO 1402, Rubber and plastics hoses and hose assemblies Hydrostatic tes

10、ting DIN ISO 1817, Rubber, vulcanized or thermoplastic Determination of the effect of liquids DIN EN ISO 4023:2010, Rubber hoses and hose assemblies for steam Test methods (ISO 4023:2009) DIN ISO 4649:2014, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cyl

11、indrical drum device (ISO 4649:2010) DIN EN ISO 4671, Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies DIN EN ISO 7326:2009, Rubber and plastics hoses Assessment of ozone resistance under static conditions (ISO 7326:20

12、06) DIN EN ISO 8031:2010, Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity (ISO 8031:2009) DIN EN ISO 8033, Rubber and plastics hoses Determination of adhesion between components DIN EN ISO 8330, Rubber and plastics hoses and hose assemblies Vocab

13、ulary DIN EN ISO 10619-1:2012, Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) DIN EN ISO 6134:2017-06 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6134 Januar

14、y 2017 ICS 23.040.70 Supersedes EN ISO 6134:2005English Version Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) Tuyaux et flexibles en caoutchouc pour vapeur sature - Spcification (ISO 6134:2017) Gummischluche und -schlauchleitungen fr gesttigten Dampf - Spezifik

15、ation (ISO 6134:2017) This European Standard was approved by CEN on 30 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

16、and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th

17、e responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos

18、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT

19、EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6134:2017 EEuropean foreword .31 Scope . 52 Normative

20、 references 53 Terms and definitions . 54 General requirements . 65 Classification 66 Materials and construction . 67 Dimensions and tolerances . 67.1 Diameters, thickness of lining and cover, and bend radii . 67.2 Length of hoses and hose assemblies and tolerances . 77.3 Concentricity. 78 Physical

21、properties of compounds 79 Physical properties of finished hoses and hose assemblies 810 Resistance to steam . 910.1 Principle 910.2 Short-term exposure 910.3 Long term test 910.4 Observations . 910.5 Additional tests . 911 Electrical resistance 912 Type testing. 1013 Marking . 1013.1 Hoses 1013.2 H

22、ose couplings . 1113.3 Identification of hose assemblies . 1114 Frequency of testing . 11Annex A (informative) Test frequency for hose assemblies in use 12Annex B (informative) Storage and admissible storage time 13Annex C (normative) Type and routine test .14Annex D (informative) Test frequency for

23、 production acceptance test 15Bibliography .16Contents PageDIN EN ISO 6134:2017-06 EN ISO 6134:2017 (E)2Foreword .4European foreword This document (EN ISO 6134:2017) has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products“ in collaboration with Technical Committee CEN/TC 218 “

24、Rubber and plastics hoses and hose assemblies” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017 and conflicting national standards shall be withdr

25、awn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 6134:2005. According t

26、o the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greec

27、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 6134:2017 has been approved by CEN as EN ISO 6134:2017

28、without any modification. DIN EN ISO 6134:2017-06 EN ISO 6134:2017 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO techn

29、ical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely

30、with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria neede

31、d for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

32、 rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used

33、 in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) princ

34、iples in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Rubber and plastics hoses and hose assemblies.This fourth edition cancels and replaces

35、the third edition (ISO 6134:2005), which has been technically revised to update Clause 2.DIN EN ISO 6134:2017-06 EN ISO 6134:2017 (E)4 1 ScopeThis document specifies requirements for two types of hoses and hose assemblies, low pressure with a maximum working pressure of 6 bar and high pressure with

36、a maximum working pressure of 18 bar, made of rubber and hose fittings made of metal, designed to convey saturated steam and hot water condensate.Each type is divided into two classes having either an oil resistant or non-oil resistant cover.NOTE Information on the frequency of testing of hose assem

37、blies in use and storage is given in Annex A and Annex B.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references,

38、the latest edition of the referenced document (including any amendments) applies.ISO 37, Rubber, vulcanized or thermoplastic Determination of tensile stress-strain propertiesISO 188, Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance testsISO 1402, Rubber and plastics hoses a

39、nd hose assemblies Hydrostatic testingISO 1817, Rubber, vulcanized or thermoplastic Determination of the effect of liquidsISO 4023:2009, Rubber hoses and hose assemblies for steam Test methodsISO 4649:2010, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cyl

40、indrical drum deviceISO 4671, Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assembliesISO 7326:2006, Rubber and plastics hoses Assessment of ozone resistance under static conditionsISO 8031:2009, Rubber and plastics hoses and

41、hose assemblies Determination of electrical resistance and conductivityISO 8033, Rubber and plastics hoses Determination of adhesion between componentsISO 8330, Rubber and plastics hoses and hose assemblies VocabularyISO 10619-1:2011, Rubber and plastics hoses and tubing Measurement of flexibility a

42、nd stiffness Part 1: Bending tests at ambient temperature3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 8330 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t

43、 t p :/ www .electropedia .org/ DIN EN ISO 6134:2017-06 EN ISO 6134:2017 (E)5 ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp4 General requirementsQuick-release coupling shall not be used under any circumstances.The end fittings used with the hose shall be of a type that pro

44、vides for tightening-up during service; for example, a clamp type to compensate for creep of the rubber compounds in the hose.NOTE 1 Where superheated steam conditions occur, the service life of the product can be reduced.NOTE 2 Vacuum caused by shutting off the hose assembly at both ends can precip

45、itate “pop-corning” or separation of the lining.5 ClassificationThis document specifies two types of hoses/hose assemblies to convey saturated steam and hot water condensate.Type 1: low-pressure steam hose, maximum working pressure 6 bar, corresponding to a temperature of 164 C.Type 2: high pressure

46、 steam hose, maximum working pressure 18 bar, corresponding to a temperature of 210 C.NOTE 1 bar = 0,1 MPa.Each type of hose is divided into either of the following: Class A: a non-oil-resistant cover; Class B: an oil-resistant cover.Both types and classes can be either of the following:a) electrica

47、lly bonded, marked “M” (see Clause 11);b) electrically conductive, marked “” (see Clause 11).6 Materials and constructionHoses shall consist of a lining which is resistant to steam and hot water condensate and shall be uniform in quality, free of porosity, air holes, foreign inclusions and other def

48、ects.The reinforcement shall be textile for Type 1 and steel wire for Type 2, either braided, spiral or cord ply construction.The cover shall give protection against mechanical damage and be resistant to heat, wear and environmental effects due to weather and short-term chemical exposure. It shall be pricked equally around the periphery and along the whole length of the hose in order to relieve any pressure built-up between the plies and the cover.7 Dimensions and tolerances7.1 Dia