DIN EN ISO 5173-2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173 2009 + Amd 1 2011) German version EN ISO 5173 2010 + A1 2011《金属材料焊接点无损检测试验 弯曲试验》.pdf

《DIN EN ISO 5173-2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173 2009 + Amd 1 2011) German version EN ISO 5173 2010 + A1 2011《金属材料焊接点无损检测试验 弯曲试验》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 5173-2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173 2009 + Amd 1 2011) German version EN ISO 5173 2010 + A1 2011《金属材料焊接点无损检测试验 弯曲试验》.pdf（23页珍藏版）》请在麦多课文档分享上搜索。

1、February 2012 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 25.160.40!$yf(“1866705www.din.deDDIN EN ISO 5173Destructive tests on welds in metallic materials Bend tests (ISO 5173:2009 + Amd. 1:2011)English translation of DIN EN ISO 5173:2012-02Zerstrende Prfungen von Schweinhten an metallischen Werkstoffen Biegeprfungen (ISO 5173:2009 + Amd. 1:2011)Englisc

3、he bersetzung von DIN EN ISO 5173:2012-02Essais destructifs des soudures sur matriaux mtalliques Essais de pliage (ISO 5173:2009 + Amd. 1:2011)Traduction anglaise de DIN EN ISO 5173:2012-02SupersedesDIN EN ISO 5173:2010-08www.beuth.deDocument comprises pagesIn case of doubt, the German-language orig

4、inal shall be considered authoritative.2302.12 DIN EN ISO 5173:2012-02 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes”, Subcommittee SC 5 “Testing and inspection of welds” (Secretariat: ANSI, U

5、SA) in collaboration with Technical Committee CEN/TC 121 “Welding” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Schweitechnik (Welding and Allied Processes Standards Committee), Joint Committee NA 092-00-05 GA NAS/NMP: Zerstrende Prfung

6、 von Schweiverbindungen (DVS AG Q 4). This standard includes Amendment A1:2011 approved by CEN on 31 October 2011. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Amendments This standard differs from DIN EN ISO 5173:2010-08 as follows: a) in Subc

7、lause 5.6.7.3 a), 2), “minimum diameter 8 mm” has been replaced by “minimum width 8 mm” and for pipe diameter 50 mm “b t 0,5 D” has been replaced by “b t 0,05 D”. Previous editions DIN DVM A 121: 1937-09 DIN 50121: 1942-04, 1952-11 DIN 50121-1: 1978-01 DIN 50121-2: 1978-01 DIN EN 910: 1996-05 DIN EN

8、 ISO 5173: 2010-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 5173 April 2010 + A1 November 2011 ICS 25.160.40 Supersedes EN 910:1996English Version Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011) Essais destructifs des soudures sur matriaux

9、mtalliques -Essais de pliage(ISO 5173:2009 + Amd. 1:2011) Zerstrende Prfungen von Schweinhten an metallischen Werkstoffen Biegeprfungen (ISO 5173:2009 + Amd. 1:2011) EN ISO 5173:2010 was approved by CEN on 2010-03-18 and Amendment A1:2011 on 2011-10-31. CEN members are bound to comply with the CEN/C

10、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr

11、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

12、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

13、 Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worl

14、dwide for CEN national Members. Ref. No. EN ISO 5173:2010 + A1:2011 EContents Page Foreword to EN ISO 5173:2010 3 !Foreword to EN ISO 5173:2010/A1:2011“ 3 1 Scope 4 2 Terms and definitions .4 3 Principle 5 4 Symbols and abbreviated terms 5 4.1 Symbols 5 4.2 Abbreviated terms .5 4.3 Figures correspon

15、ding to the abbreviations 6 5 Preparation of test specimens .9 5.1 General 9 5.2 Location 9 5.3 Marking .9 5.4 Heat treatment and/or ageing .9 5.5 Extraction 10 5.6 Specimen size . 10 6 Conditions of testing 13 6.1 Etching . 13 6.2 Testing . 13 6.3 Diameter of former and roller 19 6.4 Distance betwe

16、en rollers . 19 6.5 Bending angle . 19 6.6 Bending elongation 19 7 Test results 19 8 Test report . 20 Annex A (informative) Example of a test report 21 2 DIN EN ISO 5173:2012-02 EN ISO 5173:2010 + A1:2011 (E) Foreword to EN ISO 5173:2010 The text of ISO 5173:2009 has been prepared by Technical Commi

17、ttee ISO/TC 44 “Welding and allied processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 5173:2010 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be given the status of a national st

18、andard, either by publication of an identical text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ

19、ts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 910:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

20、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingd

21、om. Endorsement notice The text of ISO 5173:2009 has been approved by CEN as EN ISO 5173:2010 without any modification. !Foreword to EN ISO 5173:2010/A1:2011“ This document (EN ISO 5173:2010/A1:2011) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration w

22、ith Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdraw

23、n at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the na

24、tional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

25、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 5173:2009/Amd. 1:2011 has been approved by CEN as EN ISO 5173:2010/A1:2011 without any modification.“ 3 DIN EN ISO 5173:2012-02 EN ISO 5173:2010 + A1:2011 (

26、E) 1 Scope This International Standard specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or

27、absence of imperfections on or near the surface of the test specimen. It also gives the dimensions of the test specimen. In addition, this International Standard specifies a method for making longitudinal root and face bend tests to be used instead of transverse bend tests for heterogeneous assembli

28、es when base materials and/or filler metal have a significant difference in their physical and mechanical properties in relation to bending. This International Standard applies to metallic materials in all forms of product with welded joints made by any fusion arc welding process. 2 Terms and defini

29、tions For the purposes of this document, the following terms and definitions apply. 2.1 transverse face bend test specimen for a butt weld TFBB specimen for which the surface in tension is the side that contains the greater width of the weld or the side from which the welding arc was first applied,

30、applicable to transverse butt weld specimens See Figure 1. 2.2 transverse root bend test specimen for a butt weld TRBB specimen for which the surface in tension is the side opposite to that of the face butt weld bend test specimen, applicable to transverse butt weld specimens See Figure 2. 2.3 trans

31、verse side bend test specimen for a butt weld SBB specimen for which the surface in tension is a cross-section of the weld See Figure 3. 2.4 longitudinal face test specimen for a butt weld root bend test specimen for a butt weld LFBB LRBB specimen whose direction is parallel to butt weld direction,

32、applicable to face and root bend specimens See Figure 4. 4 DIN EN ISO 5173:2012-02 EN ISO 5173:2010 + A1:2011 (E) 2.5 face bend test specimen for cladding without a butt weld FBC specimen for which the cladding is in tension, applicable to both transverse and longitudinal specimens See Figure 5. 2.6

33、 side bend test specimen for cladding without a butt weld SBC specimen for which the cross-section of the cladding overlay is in tension, applicable to both transverse and longitudinal specimens See Figure 6. 2.7 face bend test specimen for cladding with a butt weld side bend test specimen for cladd

34、ing with a butt weld FBCB SBCB specimen for which the cladding is in tension or for which the cross-section of the cladding overlay is in tension and which contains a butt weld See Figures 7 and 8. 3 Principle Submitting a test specimen, taken transversely or longitudinally from a welded joint, to p

35、lastic deformation by bending it, without reversing the bending direction, in such a way that one of the surfaces or cross-sections of the welded joint is in tension. Unless otherwise specified, the test shall be carried out at an ambient temperature of (23 5) C. The test shall be made in accordance

36、 with one of the methods described in Clause 6. 4 Symbols and abbreviated terms 4.1 Symbols See Table 1 and Figures 1 to 15. 4.2 Abbreviated terms TFBB Transverse face bend test specimen for a butt weld TRBB Transverse root bend test specimen for a butt weld SBB Transverse side bend test specimen fo

37、r a butt weld LFBB Longitudinal face bend test specimen for a butt weld LRBB Longitudinal root bend test specimen for a butt weld FBC Face bend test specimen for cladding without a butt weld SBC Side bend test specimen for cladding without a butt weld FBCB Face bend test specimen for cladding with a

38、 butt weld SBCB Side bend test specimen for cladding with a butt weld 5 DIN EN ISO 5173:2012-02 EN ISO 5173:2010 + A1:2011 (E) Table 1 Symbols and designations Symbol Designation Unit A minimum percentage elongation after fracture required by the material specification % b width of the test specimen

39、 mm b1width of outside fusion line mm d diameter of the former or the inner roller mm D outside diameter of the pipeamm l distance between the rollers mm Lfinitial distance between contact of the roller and the centre line of the weld mm Looriginal gauge length mm Lsmaximum width of the weld after m

40、achining mm Lttotal length of the test specimen mm r radius of the test specimen edges mm R radius of the rollers mm t thickness of the test piece mm tcthickness of the cladding mm tsthickness of the test specimen mm twthickness of base material under cladding mm bending angle aThe term “pipe”, alon

41、e or in combination, is used to mean “pipe”, “tube” or “hollow section (without rectangular cross section)”. 4.3 Figures corresponding to the abbreviations Figures 1 to 8 represent bend test specimens for butt welds and cladding. Figure 1 Transverse face bend test specimen for a butt weld (TFBB) 6 D

42、IN EN ISO 5173:2012-02 EN ISO 5173:2010 + A1:2011 (E) Figure 2 Transverse root bend test specimen for a butt weld (TRBB) Figure 3 Transverse side bend test specimen for a butt weld (SBB) Figure 4 Longitudinal bend test specimen for a butt weld (LFBB and LRBB) 7 DIN EN ISO 5173:2012-02 EN ISO 5173:20

43、10 + A1:2011 (E) Figure 5 Face bend test specimen for cladding without a butt weld (FBC) Figure 6 Side bend test specimen for cladding without a butt weld (SBC) Figure 7 Face bend test specimen for cladding with a butt weld (FBCB) 8 DIN EN ISO 5173:2012-02 EN ISO 5173:2010 + A1:2011 (E) Figure 8 Sid

44、e bend test specimen for cladding with a butt weld (SBCB) 5 Preparation of test specimens 5.1 General Specimens shall be prepared in such a manner that the preparation does not affect either the base material or the weld metal. 5.2 Location For transverse bend testing of butt welds, the test specime

45、n shall be taken transversely from the welded joint of the manufactured product or from the welded test piece in such a way that after machining the weld axis will remain in the centre of the test specimen or at a suitable position for testing. For longitudinal bend testing of butt welds, the test s

46、pecimen shall be taken longitudinally from the welded joint of the manufactured product or from the welded test piece. The location and orientation of bend test specimens of cladding material shall be specified by the application standard or by agreement between the contracting parties. 5.3 Marking

47、Each test piece shall be marked to identify its exact location in the manufactured product or in the joint from which it has been removed. If required by the relevant application standard, the direction of working (e.g. rolling or extrusion) shall be marked. Each test specimen shall be marked to ide

48、ntify its exact location in the test piece from which it has been removed. 5.4 Heat treatment and/or ageing No heat treatment shall be applied to the welded joint or to the test specimen unless it is specified or permitted by the relevant application standard dealing with the welded joint to be tested. Details of any heat treatment shall be recorded in the test report. If natural ageing of aluminium alloys takes place, the time between welding and testing shall be recorded. 9 DIN EN ISO 5173:2012-02 EN