DIN EN ISO 3822-1-2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1 Method of measurement (ISO 3822-1 19.pdf

《DIN EN ISO 3822-1-2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1 Method of measurement (ISO 3822-1 19.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 3822-1-2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1 Method of measurement (ISO 3822-1 19.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、July 2009DEUTSCHE NORM English price group 13No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.20; 91.140.60!$XV3

2、“1535116www.din.deDDIN EN ISO 3822-1SupersedesDIN EN ISO 3822-1:1999-07www.beuth.deDocument comprises 27 pagesAcoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement (ISO 3822-1:1999+Amd. 1:2008) (includes Amendment

3、A1:2008) English version of DIN EN ISO 3822-1:2009-07 Akustik Prfung des Geruschverhaltens von Armaturen und Gerten der Wasserinstallation im Laboratorium Teil 1: Messverfahren (ISO 3822-1:1999+Amd. 1:2008) (enthlt nderung A1:2008) Englische Fassung DIN EN ISO 3822-1:2009-07 DIN EN ISO 3822-1:2009-0

4、7 2 National foreword This standard has been prepared by Technical Committee ISO/TC 43/SC 2 “Building acoustics” (Secretariat: DIN, Germany), in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” (Secretariat: AFNOR, France). The responsible

5、 German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Technical Committee NA 062-02-32 AA Bauakustische Instal-lationsmessungen. In addition to the legal units of measurement, this standard also uses the unit “inch”. It is important

6、to note that according to the German law on units in metrology, the use of the unit “mmHg” is not permitted in official or business communications within Germany. Amendment 1:2008 has been integrated in this standard and is marked by a vertical line in the left margin. The DIN Standards correspondin

7、g to the International Standards referred to in this document are as follows: ISO 7-1 DIN EN 10226-1 ISO 65 DIN EN 10255 Amendments This standard differs from DIN EN ISO 3822-1:1999-07 as follows: a) Annex D relating to measurement uncertainty has been incorporated in accordance with b) The standard

8、 has been editorially revised. Previous editions DIN 52218: 1968-01, 1972-03 DIN 52218-1: 1976-12, 1986-11 DIN EN ISO 3822-1: 1999-07 National Annex NA (informative) Bibliography DIN EN 10226-1, Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and paral

9、lel internal threads Dimensions, tolerances and designation DIN EN 10255, Non-alloy steel tubes suitable for welding and threading Technical delivery conditions EN ISO 3822-1:1999/Amd. 1:2008. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 3822-1 May 1999 +A1 December 2008 ICS 17.140.20; 9

10、1.140.60 English version Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement (ISO 3822-1:1999+Amd. 1:2008) Acoustique Mesurage en laboratoire du bruit mis par les robinetteries et les quipements hydrauliques util

11、iss dans les installations de distribution deau Partie 1: Mthode de mesurage (ISO 3822-1:1999+Amd. 1:2008) Akustik Prfung des Geruschverhaltens von Armaturen und Gerten der Wasserinstallation im Laboratorium Teil 1: Messverfahren (ISO 3822-1:1999+Amd. 1:2008) EN ISO 3822-1 was approved by CEN on 199

12、9-03-04 and Amendment A1 on 2008-11-19. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

13、 national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and

14、notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma

15、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17 B-1000 Brussels 2008 CEN All rights of expl

16、oitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 3822-1:1999+A1:2008 EDIN EN ISO 3822-1:2009-07 EN ISO 3822-1:1999+A1:2008 (E) 2 Contents Page Foreword to EN ISO 3822-1:1999 .3 Foreword to EN ISO 3822-1:1999/A1:2008 .3 Introduction 4 1 Scope .5 2 Nor

17、mative references .5 3 Definitions .5 4 Principle .7 5 Test arrangement (see figure 1) 7 5.1 Test room .7 5.2 Correction for background noise 8 5.3 Test wall .8 5.4 Test pipe 8 5.5 Connection of appliances . 10 5.6 Water supply system . 10 5.7 Stabilising and checking the test arrangement 10 5.8 Mea

18、surement of intrinsic noise of installation arrangement 12 6 Test equipment 13 6.1 Sound level meter and filters 13 6.2 Hydraulic measuring instruments 13 7 Installation noise standard . 13 8 Test procedure . 16 8.1 General 16 8.2 Determination of appliance sound pressure level Lap16 9 Expression of

19、 results 17 10 Test report 17 Annex A (informative) Procedure for venting the piping system (test pipe and twin outlet etc.) 18 Annex B (informative) Alternative procedures for measurements for computer-aided test facilities . 20 Annex C (normative) Selection of samples 21 Annex D (informative) Meas

20、urement uncertainty . 25 DIN EN ISO 3822-1:2009-07 EN ISO 3822-1:1999+A1:2008 (E) 3 Foreword to EN ISO 3822-1:1999 The text of EN ISO 3822-1:1999 has been prepared by Technical Committee CEN/TC 126 “Acoustic properties of building products and of buildings”, the secretariat of which is held by AFNOR

21、, in collaboration with Technical Committee ISO/TC 43 “Acoustics”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 1999, and conflicting national standards shall be withdrawn at the lates

22、t by November 1999. The content of this part of EN 3822 is not identical with the International Standard ISO 3822-1:1983 “Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement”. Working group CEN/TC 126/WG 3 was in

23、structed, in May 88, to examine and take into account the comments on ISO 3822-1, following the primary questionnaire. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this document : Austria, Belgium, the Czech

24、 Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. Foreword to EN ISO 3822-1:1999/A1:2008 This document (EN ISO 3822-1:1999/A1:2008) has been prepared by Technical Committee ISO

25、/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings”, the secretariat of which is held by AFNOR. This Amendment to the European Standard EN ISO 3822:1999 shall be given the status of a national standard, either by publica

26、tion of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by June 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall no

27、t be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). According to the CEN/CENELEC Internal Regulati

28、ons, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

29、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 3822-1:1999/Amd. 1:2008 has been approved by CEN as EN ISO 3822-1:1999/A1:2008 without any modification. IntroductionNoise caused by water supply installa

30、tions may lead to annoyance in adjacent rooms, for example in dwellings,hospitals and hotels, especially at night. This noise has its origin mainly in appliances. Standardisedmeasurements of such noise are needed to permit comparison of the noise of commercial products made indifferent countries.Thi

31、s part of EN ISO 3822 describes a method of measurement allowing comparable results to be obtained inlaboratory measurements.It is not possible to describe in detail how a given tap would give the same result in different laboratories.Therefore, the principle of comparing results to an installation

32、noise standard is utilised. This procedure can beregarded as a kind of calibration of the test arrangement. The installation noise standard is described in detail andthe basic arrangements for a laboratory water supply installation are given in this part of EN ISO 3822.The test conditions described

33、herein constitute the standard reference conditions essential for comparisonsbetween laboratories.Descriptions of the mounting and operating conditions for testing different types of appliances are given in otherparts of this European Standard : see EN ISO 3822-2 for draw-off taps and mixing valves,

34、 EN ISO 3822-3 for in-line valves and EN ISO 3822-4 for special appliances.4 EN ISO 3822-1:1999+A1:2008 (E) DIN EN ISO 3822-1:2009-07 1 ScopeThis part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resultingfrom the flow of water through appliances and equ

35、ipment used in water supply installations.The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers andwater-heating appliances, all of which are hereafter referred to as “appliances“.The method specified makes it possible to obtain comparable resu

36、lts of measurements in different laboratories.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated ref

37、erences, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies.ISO 7-1, Pipe threads where pressure-tight joints are made

38、 on the threads - Part 1 : Dimensions, tolerances anddesignation.ISO 49, Malleable cast iron fittings threaded to ISO 7-1.ISO 65, Carbon steel tubes suitable for screwing in accordance with ISO 7-1.EN ISO 3822-2, Acoustics - Laboratory tests on noise emission from appliances and equipment used in wa

39、tersupply installations - Part 2 : Mounting and operating conditions for draw-off taps and mixing valves(ISO 3822-2: 1995).EN ISO 3822-3, Acoustics - Laboratory tests on noise emission from appliances and equipment used in watersupply installations - Part 3 : Mounting and operating conditions for in

40、-line valves and appliances(ISO 3822-3:1997).EN ISO 3822-4, Acoustics - Laboratory tests on noise emission from appliances and equipment used in watersupply installations - Part 4 : Mounting and operating conditions for special appliances.EN 60651, Sound level meters.EN 61260, Electroacoustics - Oct

41、ave band and fractional-octave-band filters.3 DefinitionsFor the purposes of this standard the following definitions apply :3.1octave band sound pressure level, in decibelsthe unweighted sound pressure level in the frequency band of one octave. In this part of EN ISO 3822 octave bandsound pressure l

42、evels and sound pressure level differences are denoted by the subscript n.3.2a-weighted sound pressure level, in decibelsthe sound pressure level weighted with the A-weighting specified in EN 606515 EN ISO 3822-1:1999+A1:2008 (E) DIN EN ISO 3822-1:2009-07 3.3appliance sound pressure level, Lapnfor o

43、ctave bandsa quantity defined by :()srnsnnapnLLLL -= (1)whereLnis the average octave band sound pressure level in octave n, in the test room, due to the noise producedby the appliance under the specified test conditions ;Lsnis the corresponding octave band sound pressure level in the test room due t

44、o the noise produced by theinstallation noise standard (abbreviation INS) at a flow pressure of 0,3 Mpa1)(see clause 7) ;Lsrnis the reference value of the octave band sound pressure level in the octave n for the INS at flow pressureof 0,3 MPa (see clause 7).3.4appliance sound pressure level, Lapin d

45、ecibelsthe A-weighted sound pressure level, which is a characteristic value for the noise emission by an appliance. It isdefined, in decibels, by :()()dB10A10lg10nsrnsnn61napkLLLL+-=(2)wheren = 1, 2, 3, ., 6 are the octaves with mid-frequencies from 125 Hz to 4 000 Hz ;k(A)nare the A-weighting value

46、s, in decibels, given in EN 60651 for the six octave mid-frequencies from 125 Hzto 4 000 Hz.When the sound pressure level difference (Lsn- Lsrn) at the octave band mid-frequencies from 125 Hz to 4 000 Hzis constant to within 2 dB (see clause 8), the appliance sound pressure level Lapmay be obtained

47、directly fromthe A-weighted sound pressure levels as follows :()srsapLLLL -= (3)whereL is the average A-weighted sound pressure level in the test room due to the noise produced by theappliance under the specified test conditions ;Lsis the average A-weighted sound pressure level in the test room due

48、to the noise produced by the INS ata flow pressure of 0,3 MPa ;Lsris the reference A-weighted sound pressure level of the INS at a flow pressure of 0,3 MPa (see clause 7).The appliance sound pressure level Lapshall always be given rounded to the nearest whole decibel.1)1MPa=10bar6 EN ISO 3822-1:1999

49、+A1:2008 (E) DIN EN ISO 3822-1:2009-07 4PrincipleThe appliance to be tested is mounted at the end of a water pipe, the test pipe, which is fixed to the wall of a room.The wall is called the test wall, the room the test room (see figure 1).The sound generated by the appliance is transmitted from the test pipe to the test wall. The airborne sound whichis radiated from the test wall into the test room is measured.In order to obtain comparable measurements in different laboratories, the noise produced by the appliance iscompared wit