DIN EN ISO 18541-1-2016 Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1 General information and use case definition (ISO 18541-1.pdf

《DIN EN ISO 18541-1-2016 Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1 General information and use case definition (ISO 18541-1.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 18541-1-2016 Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1 General information and use case definition (ISO 18541-1.pdf（47页珍藏版）》请在麦多课文档分享上搜索。

1、April 2016 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 43.040.15; 43.180!%Q?“2469728www.d

2、in.deDIN EN ISO 18541-1Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 1: General information and use case definition (ISO 18541-1:2014);English version EN ISO 18541-1:2014,English translation of DIN EN ISO 18541-1:2016-04Straenfahrzeuge Standardisierter

3、 Zugang zu Reparatur- und Wartungsinformationen (RMI) Teil 1: Allgemeine Informationen und Beschreibung der Anwendungsflle (ISO 18541-1:2014);Englische Fassung EN ISO 18541-1:2014,Englische bersetzung von DIN EN ISO 18541-1:2016-04Vhicules routiers Partie 1: Informations gnrales et dfinitions de cas

4、 dutilisation (ISO 18541-1:2014);Version anglaise EN ISO 18541-1:2014,Traduction anglaise de DIN EN ISO 18541-1:2016-04SupersedesDIN EN ISO 18541-1:2015-01www.beuth.deDocument comprises 47 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered auth

5、oritative.04.16Normalisation de laccs aux informations relatives la rparation et la maintenance pour lautomobile (RMI) DIN EN ISO 18541-1:2016-04 2 A comma is used as the decimal marker. National foreword This document (EN ISO 18541-1:2014) has been prepared by Technical Committee CEN/TC 301 “Road v

6、ehicles” (Secretariat: AFNOR, France) in collaboration with Technical Committee ISO/TC 22 “Road vehicles”. The responsible German body involved in its preparation was DIN-Normenausschuss Automobiltechnik (DIN Standards Committee Road Vehicle Engineering), Working Committee NA 052-01-31 AA Datenkommu

7、nikation. Amendments Compared with DIN EN ISO 18541-1:2015-01, the following corrections have been made to the German version only and therefore do not affect the English text: a) the German title of the standard has been corrected to read “Straenfahrzeuge Standardisierter Zugang zu Reparatur- und W

8、artungsinformationen (RMI) Teil 1: Allgemeine Informationen und Beschreibung der Anwendungsflle”; b) in Clause 3 “Terms, definitions, symbols and abbreviated terms”, the abbreviated term “PIN” has been added; c) an error in Subclause 7.1.1, Table 2, line 3, column 2 has been corrected; d) in Subclau

9、se 7.2, Table 9, a NOTE has been added; e) the URL in the referenced document 16 has been corrected. Previous editions DIN EN ISO 18541-1: 2015-01 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 18541-1 September 2014 ICS 43.040.15; 43.180 English Version Road vehicles - Standardized access

10、 to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2014) Vhicules routiers - Normalisation de laccs aux informations relatives la rparation et la maintenance pour lautomobile (RMI) - Partie 1: Informations gnrales et dfinitions

11、de cas dusage (ISO 18541-1:2014) Straenfahrzeuge - Standardisierter Zugang zu Reparatur- und Wartungsinformationen (RMI) - Teil 1: AllgemeineInformationen und Beschreibung derAnwendungsflle (ISO 18541-1:2014) This European Standard was approved by CEN on 13 March 2014. CEN members are bound to compl

12、y with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

13、Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sam

14、e status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

15、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C OM I T EUR O P EN DE NOR M AL I S ATI ON EUR O P I S C HES KOM I TE E F R NOR M UNG CEN-CENELEC Management Centre: Avenue Marnix

16、 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 18541-1:2014 E Contents PageEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms, definitions, symbols and abbreviated terms . 63

17、.1 Terms and definitions . 63.2 Abbreviated terms 124 Document overview and structure . 125 General information 145.1 Access to vehicle RMI .145.2 Standardized access to RMI benefit examples 156 RMI use case overview and principles 166.1 Overview of basic principles 166.2 Overview of use case cluste

18、rs . 167 RMI use cases 217.1 UC 1 User authentication, authorization and administration .217.2 UC 2 Payment for RMI 247.3 UC 3 Vehicle identification . 257.4 UC 4 Provide selection methods for RMI . 277.5 UC 5 Retrieve information packages . 317.6 UC 6 Vehicle diagnostics 357.7 UC 7 Updating, replac

19、ing and tuning of modules (ECUs) 367.8 UC 8 Electronic maintenance history . 387.9 UC 9 Repair assistance technical support .387.10 UC 10 Request contact for specific RMI 387.11 UC 11 Courses and training information . 43Bibliography .44DIN EN ISO 18541-1:2016-04 EN ISO 18541-1:2014 (E)2Foreword .4E

20、uropeanforeword This document (EN ISO 18541-1:2014) has been prepared by Technical Committee ISO/TC 22 “Road vehicles” in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standa

21、rd, either by publication of an identical text or by endorsement, at the latest by March 2015, and conflicting national standards shall be withdrawn at the latest by March 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

22、and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, C

23、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United King

24、dom. Endorsement notice The text of ISO 18541-1:2014 has been approved by CEN as EN ISO 18541-1:2014 without any modification. DIN EN ISO 18541-1:2016-04 EN ISO 18541-1:2014 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (

25、ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, go

26、vernmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maint

27、enance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Atten

28、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction

29、 and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformit

30、y assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.ISO 18541-1:2013 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 301, Road

31、vehicles, in collaboration with ISO Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).ISO 18541 consists of the following parts, under the general titl

32、e Road vehicles Standardized access to automotive repair and maintenance information (RMI): Part 1: General information and use case definition Part 2: Technical requirements Part 3: Functional user interface requirements Part 4: Conformance testISO 18542, Road vehicles Standardized repair and maint

33、enance information (RMI) terminology, is a complementary standard that defines standardized RMI terminology and consists of two parts: Part 1: General information and use case definition Part 2: Standardized process implementation requirements, Registration AuthorityThe standardized RMI terminology

34、is contained in a so-called Digital Annex that is maintained and published by the CEN-appointed Registration Authority.DIN EN ISO 18541-1:2016-04 EN ISO 18541-1:2014 (E)4 IntroductionThis set of standards includes the requirements to be fulfilled by Repair and Maintenance Information (RMI) systems a

35、s applied by the European Commission Enterprise and Industry Directorate-General, Consumer goods Automotive industry EC mandate M/4215, dated Brussels, 21 January 2008.This mandate relates to the EC type-approval system for vehicles falling into the scopes of Directives 70/156/EEC (replaced by 2007/

36、46/EC 8), 2002/24/EC 6 and 2003/37/EC 7 and, in particular, to requirements for access to vehicle repair and maintenance information by independent operators.This International Standard only covers access to automotive repair and maintenance information for light passenger and commercial vehicles (s

37、ee NOTE 1) and heavy duty vehicles (see NOTE 2) based on Directive 70/156/EEC (replaced by 2007/46/EC 8).The purpose of the EC Mandate M/421 is to develop a standard or set of standards which specify the requirements to provide standardized access to automotive repair and maintenance information (RM

38、I) for independent operators.The information included in this part of ISO 18541 derives from the legislative requirements on European level in the field of RMI and related security requirements and can be referenced by legislation in other countries.NOTE 1 Regulation (EC) No 715/2007 of the European

39、 Parliament and of the Council of 20 June 2007 on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information and Commission Regulation (EC) No 692/2008 of 18 July 2008 implemen

40、ting and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information and amending Commissio

41、n Regulation (EU) No 566/2011 of 8 June 2011 amending Regulation (EC) No 715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards access to vehicle repair and maintenance information.NOTE 2 Regulation (EC) No 595/2009 of the European Pparliament an

42、d of the Council of 18 June 2009 on type-approval of motor vehicles with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information, Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of

43、 the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI), and Commission Regulation (EU) No 64/2012 of 23 January 2012 amending Regulation (EU) No 582/2011 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the

44、 Council with respect to emissions from heavy duty vehicles (Euro VI).DIN EN ISO 18541-1:2016-04 EN ISO 18541-1:2014 (E)5 1 ScopeThis part of ISO 18541 provides a general overview and structure of each part of ISO 18541. It also specifies use cases related to repair and maintenance information (RMI)

45、 systems in order to standardize the access to RMI for independent operators.This part of ISO 18541 also describes the use cases applicable to the standardized access to automotive RMI. The use cases address real world scenarios (e.g. servicing vehicles) in regard to the information access necessary

46、 to perform vehicle roadside assistance, inspection, diagnosis, repair and maintenance, including the updating and replacement of Electronic Control Units (ECU).The RMI systems used by personnel to perform the services consist of: a Web-based system, which provides access to RMI needed to perform th

47、e service(s); contact information for specific RMI; a security framework to protect access to security related RMI.This part of ISO 18541 provides an overview of the entire standard and how it applies to the automotive industry.This part of ISO 18541 is applicable to light passenger and commercial v

48、ehicles as defined in regulation (EC) 715/2007 Article 2.152 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 18541-2, Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements3 Terms, definitions, symbols and abbreviated terms3.1 Term