DIN EN ISO 17694-2016 Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694 2016) German version EN ISO 17694 2016《鞋靴 鞋帮和鞋衬的试验方法 抗弯性(ISO 17694-2016) 德文版本EN ISO.pdf

《DIN EN ISO 17694-2016 Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694 2016) German version EN ISO 17694 2016《鞋靴 鞋帮和鞋衬的试验方法 抗弯性(ISO 17694-2016) 德文版本EN ISO.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 17694-2016 Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694 2016) German version EN ISO 17694 2016《鞋靴 鞋帮和鞋衬的试验方法 抗弯性(ISO 17694-2016) 德文版本EN ISO.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、October 2016 English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 61.060!%“2579902www.din.deDIN EN

2、ISO 17694Footwear Test methods for uppers and lining Flex resistance (ISO 17694:2016);English version EN ISO 17694:2016,English translation of DIN EN ISO 17694:2016-10Schuhe Prfverfahren fr Obermaterialien und Futter Dauerfaltverhalten (ISO 17694:2016);Englische Fassung EN ISO 17694:2016,Englische b

3、ersetzung von DIN EN ISO 17694:2016-10Chaussures Mthodes dessai pour les tiges et les doublures Rsistance la flexion (ISO 17694:2016);Version anglaise EN ISO 17694:2016,Traduction anglaise de DIN EN ISO 17694:2016-10SupersedesDIN EN 13512:200204www.beuth.deDocument comprises 12 pagesDTranslation by

4、DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.10.16 DIN EN ISO 17694:2016-10 2 A comma is used as the decimal marker. National foreword This document (EN ISO 17694:2016) has been prepared by Technical Committee CEN/TC 309 “Footwear” (Secretariat:

5、 AENOR, Spain) in collaboration with Technical Committee ISO/TC 216 “Footwear”. The responsible German body involved in its preparation was DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-10-11 AA Schuhe. The DIN Standards corresponding to the

6、 International Standards referred to in this document are as follows: ISO 3696 DIN ISO 3696 ISO 5402-1:2011 DIN EN ISO 5402-1:2012-03 ISO 17709 DIN EN 13400 ISO 18454 DIN EN 12222 Amendments This standard differs from DIN EN 13512:2002-04 as follows: a) the number of the standard has been changed; b

7、) normative references have been updated; c) the standard has been editorially revised. Previous editions DIN EN 13512: 2002-04 National Annex NA (informative) Bibliography DIN EN 12222, Footwear Standard atmospheres for conditioning and testing of footwear and components for footwear DIN EN 13400,

8、Footwear Sampling location, preparation and duration of conditioning of samples and test pieces DIN ISO 3696, Water for analytical laboratory use Specification and test methods DIN EN ISO 5402-1:2012-03, Leather Determination of flex resistance Part 1: Flexometer method (ISO 5402-1:2011) EUROPEAN ST

9、ANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17694 May 2016 ICS 61.060 Supersedes EN 13512:2001English Version Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694:2016) Chaussures - Mthodes dessai pour les tiges et les doublures - Rsistance la flexion (ISO 17694:2016) Schuhe

10、- Prfverfahren fr Obermaterialien und Futter - Dauerfaltverhalten (ISO 17694:2016) This European Standard was approved by CEN on 15 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n

11、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A

12、version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cypru

13、s, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingd

14、om. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1769

15、4:2016 EEuropean foreword .31 Scope . 52 Normative references 53 Terms and definitions . 54 Short description . 55 Apparatus and material 56 Sampling and conditioning 76.1 General . 76.2 Dry tests 76.3 Wet tests . 76.4 Cold tests 87 Test method . 87.1 Principle 87.2 Procedure 88 Test report 10Conten

16、ts PageDIN EN ISO 17694:2016-10 EN ISO 17694:2016 (E) 2Foreword 4European foreword This document (EN ISO 17694:2016) has been prepared by Technical Committee CEN/TC 309 “Footwear“, the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 “Footwear“. This Europe

17、an Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2016, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the ele

18、ments of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13512:2001. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

19、 countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

20、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17694:2016 has been approved by CEN as EN ISO 17694:2016 without any modification. DIN EN ISO 17694:2016-10 EN ISO 17694:2016 (E)3 ForewordISO (the Internat

21、ional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has bee

22、n established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stand

23、ardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordan

24、ce with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

25、 any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsem

26、ent.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationISO 17694 was prepared b

27、y the European Committee Standardization (CEN) Technical Committee CEN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first

28、 edition (ISO 17694:2003), which has been technically revised.DIN EN ISO 17694:2016-10 EN ISO 17694:2016 (E) 4 1 ScopeThis International Standard specifies a test method for determining the flex resistance of uppers and linings irrespective of the material in order to assess the suitability for the

29、end use.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an

30、y amendments) applies.ISO 3696, Water for analytical laboratory use Specification and test methodsISO 5402-1:2011, Leather Determination of flex resistance Part 1: Flexometer methodISO 177091), Footwear Sampling location, preparation and duration of conditioning of samples and test piecesISO 184542)

31、, Footwear Standard atmospheres for conditioning and testing of footwear and components for footwear3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1flex resistanceresistance of a material to crack or otherwise fail at flexing creases3.2surfacevi

32、sible site of the material during the use at the shoeNote 1 to entry: The visible site of the material can be by upper the grain site of the leather or the coated site of a coated textile, by lining the site of the material visible from the inside of the shoe.4 Short descriptionTest specimens are cu

33、t from a shoe vamp or from material for shoes, folded and inserted in the test machine. The test simulates the damage caused by the inward folding of the vamp of the upper, but does not readily reproduce damage occurring on outward folds. It is carried out humid, dry or in a cold climate.5 Apparatus

34、 and materialThe following apparatus and material shall be used.1) EN 13400 is equivalent to ISO 17709.2) EN 12222 is equivalent to ISO 18454.DIN EN ISO 17694:2016-10 EN ISO 17694:2016 (E)5 5.1 Test machine, in accordance with ISO 5402-1:2011, 4.1 including the following.5.1.1 At least four pairs of

35、 clamps. The upper clamp consists of a pair of flat plates as shown in Figure 1.The lower clamp is fixed and lies in the same vertical plane as the upper clamp.Dimensions in millimetresBCEFGH12415 150 125 1Key1 flexing angle 2230 0302 clamp tightening screw3 2 mm radius4 horizontal axleFigure 1 Uppe

36、r clamp dimensions5.1.2 Means of applying a simple harmonic reciprocating action, to repeatedly move the upper clamp through an angle of 2230 030. The speed of oscillation shall be (100 5) cycles/min.The distance between the upper and lower clamp, when the upper clamp is in the horizontal position,

37、shall be (25 1) mm.5.1.3 Means of counting, the total number of cycles.5.2 Press knife, (70 1) mm (45 1) mm or similar for cutting test specimens.5.3 Optical magnifier, with a magnification of approximately four to six times.5.4 For wetting test specimens.5.4.1 Glass dish, minimum of 100 mm diameter

38、 and 25 mm depth.5.4.2 Distilled or deionised water, complying with Grade 3 of ISO 3696.DIN EN ISO 17694:2016-10 EN ISO 17694:2016 (E) 6 5.4.3 Filter paper.5.4.4 Desiccator or another container, able to evacuate.5.4.5 Vacuum pump, for reducing the pressure within the desiccator to below 4 kPa.5.5 Fo

39、r conducting cold tests, a cabinet capable of maintaining an internal atmospheric temperature of at least (-5 2) C and large enough to contain the test machine. If required, temperatures down to -30 C can be used.6 Sampling and conditioning6.1 GeneralCut out the required number (see Table 1) of rect

40、angular test specimens with the press knife. Cut half the required number of test specimens with the longer edge parallel with the along direction of the material backbone direction for leather and selvedge (warp) or machine direction for non-leather materials and half perpendicular to this. For tes

41、t specimens cut from uppers, the along direction is the X-axis as defined in ISO 17709.For uppers, cut a test specimen from the centre of the forepart so that the centre of the test specimen aligns with the point of most flexing in the shoe.For materials, cut test specimens from a range of positions

42、 across the full usable width and length of the sheet material. For a material with a woven structure, this shall prevent any two test specimens containing the same warp or weft threads.It can be that it is impossible to cut a test specimen of sufficient size from certain types of footwear especiall

43、y childrens. The test specimen size may be reduced slightly at width only; the length (70 1) mm shall not be reduced. However, it is preferred to test the materials themselves and, if necessary, introduce perforations or seams (or other design features) similar to that found in the forepart of the s

44、hoe.Table 1 Standard test conditions and number of test specimensType of material being testedTesting conditionsDry Wet ColdGrain leather 2 2 Coated leather 2 2 2Suede 2 Coated fabric 4 4Fabric 4 6.2 Dry testsPlace all the test specimens which will be tested dry in a standard controlled atmosphere c

45、omplying with ISO 18454 for at least 24 h prior to test.6.3 Wet testsPlace any test specimens that are to be tested wet in a glass dish. Fill in distilled or deionised water until a minimum water depth of 10 mm. Place the glass dish in the desiccator. Reduce the pressure for 2 min under less the 4 k

46、Pa. The normal pressure has to be re-established after the 2 min. Repeat this process two times. Take the test specimens out of the desiccator and remove the rest of water with filter paper and start the wet tests immediate.DIN EN ISO 17694:2016-10 EN ISO 17694:2016 (E)7 6.4 Cold testsThe test machi

47、ne shall be placed in a cold cabinet. Place the test specimens in the test machine. Close the cabinet and start the cooling until the desired temperature. The test shall start after 30 min in the cold atmosphere.Warm the cold chamber slowly to room temperature after flexing to avoid condensation eff

48、ects. After replacing the specimens cool the chamber and start the flexometer 30 min after reaching the desired temperature again.7 Test method7.1 PrincipleA rectangular test specimen is clamped in a flexing machine. One end of the test specimen is held in an upper clamp with the surface folded inwards so that thes