DIN EN ISO 17672-2017 Brazing - Filler metals (ISO 17672 2016) German version EN ISO 17672 2016《硬焊接 填充材料(ISO 17672-2016) 德文版本EN ISO 17672-2016》.pdf

《DIN EN ISO 17672-2017 Brazing - Filler metals (ISO 17672 2016) German version EN ISO 17672 2016《硬焊接 填充材料(ISO 17672-2016) 德文版本EN ISO 17672-2016》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 17672-2017 Brazing - Filler metals (ISO 17672 2016) German version EN ISO 17672 2016《硬焊接 填充材料(ISO 17672-2016) 德文版本EN ISO 17672-2016》.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、January 2017 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.50!%_/“2605912www.din.deD

2、IN EN ISO 17672Brazing Filler metals (ISO 17672:2016);English version EN ISO 17672:2016,English translation of DIN EN ISO 17672:2017-01Hartlten Lote (ISO 17672:2016);Englische Fassung EN ISO 17672:2016,Englische bersetzung von DIN EN ISO 17672:2017-01Brasage fort Mtaux dapport (ISO 17672:2016);Versi

3、on anglaise EN ISO 17672:2016,Traduction anglaise de DIN EN ISO 17672:2017-01SupersedesDIN EN ISO 17672:201011www.beuth.deDocument comprises 29 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.17 DIN EN ISO 17672:2017-01 2 A

4、comma is used as the decimal marker. National foreword This document (EN ISO 17672:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” (Secretariat: DIN, Germany). The responsible

5、German body involved in its preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Committee NA 092-00-26 AA Hartlten (DVS AG V 6.1). The DIN Standards corresponding to the European and International Standards referred to

6、in this document are as follows: ISO 3677 DIN EN ISO 3677 ISO 14344 DIN EN ISO 14344 ISO 80000-1 DIN EN ISO 80000-1 Amendments This standard differs from DIN EN ISO 17672:2010-11 as follows: a) upper limits in Table 3 have been corrected; b) some compositions of filler metals in Table 6 have been co

7、rrected; c) further alloys have been included in Tables 6, 8 and 9 and in Table A.1; d) melting temperatures in Tables 6, 8 and 9 and in Table A.1 have been corrected; e) in Table 7, the column “Indicative minimum brazing temperature” has been deleted; f) Table 10 has been harmonized with the remain

8、ing tables in indicating the minimum and maximum compositions by mass; g) the Ag composition by mass has been corrected in Table 1, alloy Pd 597; h) the standard has been editorially revised. Previous editions DIN 1710: 1925-04 DIN 1711: 1925-04 DIN 1733: 1944-06 DIN 1734: 1944-06 DIN 1735: 1944-08

9、DIN 8512: 1963-02 DIN 8513-1: 1964-04, 1973-02, 1979-10 DIN 8513-2: 1966-04, 1976-01, 1979-10 DIN 8513-3: 1966-04, 1969-12, 1976-01, 1979-10, 1986-07 DIN 8513-4: 1981-02 DIN 8513-5: 1983-02 DIN EN 1044: 1999-07 DIN EN ISO 17672: 2010-11 DIN EN ISO 17672:2017-01 3 National Annex NA (informative) Bibl

10、iography DIN EN ISO 3677, Filler metal for soldering and brazing Designation DIN EN ISO 14344, Welding consumables Procurement of filler materials and fluxes DIN EN ISO 80000-1, Quantities and units Part 1: General DIN EN ISO 17672:2017-01 4 This page is intentionally blank EUROPEAN STANDARD NORME E

11、UROPENNE EUROPISCHE NORM EN ISO 17672 September 2016 ICS 25.160.50 Supersedes EN ISO 17672:2010English Version Brazing - Filler metals (ISO 17672:2016) Brasage fort - Mtaux dapport (ISO 17672:2016) Hartlten - Lote (ISO 17672:2016) This European Standard was approved by CEN on 29 July 2016. CEN membe

12、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio

13、n to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Manageme

14、nt Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L

15、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17

16、, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17672:2016 EEuropean foreword .31 Scope . 52 Normative references 53 Composition 54 Special vacuum requirement . 65 Chemical analysis . 66 Designation 77 Te

17、chnical delivery conditions . 77.1 Types of product 77.2 Dimensions . 77.2.1 General 77.2.2 Foils . 77.2.3 Rods . 87.2.4 Wires 97.3 Condition 97.4 Marking . 97.5 Packaging . 97.6 Product certificates . 98 Metal hazards . 9Annex A (normative) Codification 20Bibliography .25Contents PageDIN EN ISO 176

18、72:2017-01 EN ISO 17672:2016 (E)2Foreword 4European foreword This document (EN ISO 17672:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN

19、. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of

20、the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 17672:2010. According to the CEN-CENELEC Internal Regulations, the national standards organizations of th

21、e following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl

22、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17672:2016 has been approved by CEN as EN ISO 17672:2016 without any modification. DIN EN ISO 17672:2017-01 EN ISO 17672:2016 (E)3 ForewordISO (t

23、he International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical commit

24、tee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotech

25、nical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted

26、in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

27、 Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute

28、an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee

29、 responsible for this document is ISO/TC 44, Welding and allied processes.This second edition cancels and replaces the first edition (ISO 17672:2010), which has been technically revised.Requests for official interpretations of any aspect of this International Standard should be directed to the Secre

30、tariat of ISO/TC 44 via your national standards body. A complete listing of these bodies can be found at www.iso.org.DIN EN ISO 17672:2017-01 EN ISO 17672:2016 (E)4 1 ScopeThis International Standard specifies the compositional ranges of a series of filler metals used for brazing. The filler metals

31、are divided into seven classes, related to their composition, but not necessarily to the major element present.NOTE 1 For the major element(s) present, see Annex A.In the case of composite products, such as flux-coated rods, pastes or plastics tapes, this International Standard covers only the fille

32、r metal that forms parts of such products. The melting temperatures given in the tables are only approximate, as they necessarily vary within the compositional range of the filler metal. Therefore, they are given only for information. Technical delivery conditions are given for brazing filler metals

33、 and products containing brazing filler metals with other constituents such as flux and/or binders.NOTE 2 For some applications, e.g. precious metal jewellery, aerospace and dental, filler metals other than those included in this International Standard are often used and these are covered by other I

34、nternational Standards to which reference can be made.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest ed

35、ition of the referenced document (including any amendments) applies.ISO 3677, Filler metal for soft soldering and braze welding DesignationISO 80000-1:2009, Quantities and units Part 1: General3 CompositionThe filler metal shall have a composition in accordance with Tables 5 to 13 for the particular

36、 type, except as modified for special vacuum requirements (see Clause 4 and Table 1).If the values for an element range from 0 () to a defined value, the element may be, but does not have to be, in that brazing filler metal.For the purposes of determining compliance with composition limits, any valu

37、e obtained from the analysis shall be rounded to the same number of decimal places as used in this International Standard in expressing the specified limit. The following rules shall be used for rounding.a) When the figure immediately after the last figure to be retained is less than five, then the

38、last figure to be retained shall be kept unchanged.b) When the figure immediately after the last figure to be retained is either1) greater than five, or2) equal to five and followed by at least one figure other than zero,the last figure to be retained shall be increased by one.c) When the figure imm

39、ediately after the last figure to be retained is equal to five, and followed by zeros only, then the last figure to be retained shall be left unchanged if even, and increased by one DIN EN ISO 17672:2017-01 EN ISO 17672:2016 (E)5 if odd. For the purposes of determining compliance with the requiremen

40、ts of this International Standard, the actual test values obtained shall be subjected to the rounding-off instructions given in ISO 80000-1:2009, Annex B.NOTE The chemical analysis is of the bulk material, but the material can be composed of discrete powders with different individual compositions or

41、 multiple layers of roll-clad foils where each layer can have a different individual composition.4 Special vacuum requirementIn a few instances, which are most likely to apply to Ag 272, Pd 287, Pd 387, Pd 388, Pd 481, Pd 483, Pd 484, Pd 587, Pd 647 and Au 295, Au 375, Au 625, Au 752, Au 801 and Au

42、827, lower impurity limits can be required for brazing in vacuum or service in vacuum and these limits shall be as given in Table 1.Filler metals complying with Table 1 shall have the letter V added as a suffix to the codification plus the digit 1 or 2 to indicate the grade.NOTE Grade 1 is intended

43、for the most demanding duties, Grade 2 for less demanding.Table 1 Impurity limits for special vacuum requirementsImpurityLimit % by mass max.Grade 1 Grade 2Ca0,005 0,005Cd 0,001 0,002P 0,002 0,002bPb 0,002 0,002Zn 0,001 0,002Mnc0,001 0,002Inc0,002 0,003All other elements where vapour pressure at 500

44、 C is 1,3 105Pad0,001 0,002aFor filler metal Ag 272 (see Table 6), lower levels may be available by agreement between the purchaser and the supplier.bFor filler metal Ag 272, 0,02 % maximum.cExcept where otherwise specified in Tables 5 to 13.dExamples of such elements are Ca, Cs, K, Li, Mg, Na, Rb,

45、S, Sb, Se, Sr, Te and Tl. For such elements (including Cd, Pb and Zn), the total is limited to 0,010 %.5 Chemical analysisChemical analyses shall be carried out by any suitable method, but it should be noted that in the case of many brazing alloys, the use of reference standards may be essential, as

46、 agreed between the purchaser and the supplier. Analysis is only required to be carried out routinely for those elements for which specific limits are shown. If, however, the presence of other elements is suspected or in the course of routine analysis is indicated to be in excess of the limits laid

47、down for unnamed elements, or would bring the total of impurities above the specified limit, further analyses shall be carried out for such elements.DIN EN ISO 17672:2017-01 EN ISO 17672:2016 (E)6 6 DesignationThe filler metal shall be designated by the description “filler metal,” reference to this

48、International Standard (i.e. ISO 17672) and a code. Details of the two options for the code system used are given in Annex A.As an example, the designations of an aluminium filler metal containing 11 % to 13 % Si, in accordance with this International Standard, can be made in one of the following ways:EXAMPLE 1 Filler metal ISO 17672-Al 112where“Filler metal” is the description;“ISO 17672” is the reference to this International Standard;“Al 112” is the