DIN EN ISO 17641-2-2016 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 Self-restraint tests (ISO 17641-2 2015).pdf

《DIN EN ISO 17641-2-2016 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 Self-restraint tests (ISO 17641-2 2015).pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 17641-2-2016 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 Self-restraint tests (ISO 17641-2 2015).pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.40!%LsM“2418042www.din.deDI

2、N EN ISO 17641-2Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests (ISO 17641-2:2015);English version EN ISO 17641-2:2015,English translation of DIN EN ISO 17641-2:2016-03Zerstrende Prfung von Schweiverbindungen an met

3、allischen Werkstoffen Heirissprfungen fr Schweiungen Lichtbogenschweiprozesse Teil 2: Selbstbeanspruchende Prfungen (ISO 17641-2:2015);Englische Fassung EN ISO 17641-2:2015,Englische bersetzung von DIN EN ISO 17641-2:2016-03Essais destructifs des soudures sur matriaux mtalliques Essais de fissuratio

4、n chaud des assemblages souds Procds de soudage larc Partie 2: Essais sur prouvettes auto-brides (ISO 17641-2:2015);Version anglaise EN ISO 17641-2:2015,Traduction anglaise de DIN EN ISO 17641-2:2016-03SupersedesDIN EN ISO 17641-2:2005-09www.beuth.deDocument comprises 21 pagesDTranslation by DIN-Spr

5、achendienst.In case of doubt, the German-language original shall be considered authoritative.02.16 DIN EN ISO 17641-2:2016-03 2 A comma is used as the decimal marker. National foreword This document (EN ISO 17641-2:2015) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processe

6、s” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was Joint Committee NA 092-00-05 GA Gemeinschaftsarbeitsausschuss NAS/NMP: Zerstrende Prfung von Schweiverbindungen (DVS AG Q 4/

7、Q 4.1) of DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes) The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 5173 DIN EN ISO 5173 ISO 5178 DIN EN ISO 5178 ISO 6892-1 DIN EN ISO 68

8、92-1 ISO 15614-1 DIN EN ISO 15614-1 ISO 15792-1 DIN EN ISO 15792-1 ISO 17641-1:2004 DIN EN ISO 17641-1:2004-10 Amendments This standard differs from DIN EN ISO 17641-2:2005-09 as follows: a) in Clause 2, references to EN Standards have been replaced by references to the relevant ISO Standards and ha

9、ve been updated; b) in Clause 6 “Description of the tests”, references to EN Standards have been replaced by references to ISO Standards; c) no content-related or technical changes have been made; d) the standard has been harmonized with the presentation rules given in the ISO/IEC Directives, Part 2

10、; e) DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing) is now co-issuer of the standard. Previous editions DIN 50129: 1954-10, 1973-10 DIN EN ISO 17641-2: 2005-09 DIN EN ISO 17641-2:2016-03 3 National Annex NA (informative) Bibliography DIN EN ISO 5173, Destructive tests

11、 on welds in metallic materials Bend tests DIN EN ISO 5178, Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints DIN EN ISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperature DIN EN ISO 15614-1, Specificat

12、ion and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys DIN EN ISO 15792-1, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and

13、 nickel alloys DIN EN ISO 17641-1:2004-10, Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 1: -General (ISO 17641-1:2004) DIN EN ISO 17641-2:2016-03 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS

14、O 17641-2 November 2015 ICS 25.160.40 Supersedes EN ISO 17641-2:2005English Version Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015) Essais destructifs des soudures sur matriaux mtalliques -

15、Essais de fissuration chaud des assemblages souds - Procds de soudage larc - Partie 2: Essais sur prouvettes auto-brides(ISO 17641-2:2015) Zerstrende Prfung von Schweiverbindungen an metallischen Werkstoffen - Heirissprfungen fr Schweiungen - Lichtbogenschweiprozesse - Teil 2: Selbstbeanspruchende P

16、rfungen (ISO 17641-2:2015)This European Standard was approved by CEN on 26 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date l

17、ists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und

18、er the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former

19、Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EURO

20、PEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17641-2:2015 EForeword 41 Scope . 52 Normative references

21、 53 Terms and definitions . 54 Symbols, designations, and units 65 Principle 66 Description of the tests 76.1 T-joint weld cracking tests 76.1.1 General 76.1.2 Dimension of the test pieces 76.1.3 Preparation of the test pieces . 96.1.4 Welding of the test pieces 96.1.5 Examination of the test piece

22、. 106.1.6 Test report 106.2 Weld metal tensile test 106.2.1 General. 106.2.2 Test specimen 106.2.3 Examination of the test specimen 116.2.4 Test report 126.3 Longitudinal bend test 126.3.1 General. 126.3.2 Test weld 126.3.3 Test specimen 126.3.4 Surface preparation 146.3.5 Testing 146.3.6 Examinatio

23、n of the test specimen 146.3.7 Test report 14Annex A (informative) Test report for T-joint weld cracking test .15Annex B (informative) Test report for weld metal tensile test .16Annex C (informative) Test report for longitudinal bend test.17Contents PageDIN EN ISO 17641-2:2016-03 EN ISO 17641-2:2015

24、 (E) 2European foreword .3European foreword This document (EN ISO 17641-2:2015) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European

25、 Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of thi

26、s document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 17641-2:2005. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following count

27、ries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol

28、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17641-2:2015 has been approved by CEN as EN ISO 17641-2:2015 without any modification. DIN EN ISO 17641-2:2016-03 EN ISO 17641-2:2015 (E) 3 ForewordISO (the Inter

29、national Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has

30、been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical st

31、andardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accor

32、dance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details

33、 of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endor

34、sement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee respons

35、ible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 5, Testing and inspection of welds.This second edition cancels and replaces the first edition (ISO 17641-2:2005), of which it constitutes a minor amendment.ISO 17641 consists of the following parts, under the general

36、title Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes : Part 1: General Part 2: Self-restraint tests Part 3: Externally loaded tests Technical ReportDIN EN ISO 17641-2:2016-03 EN ISO 17641-2:2015 (E) 4 1 ScopeThis part of ISO 17641 specifies th

37、e required specimens, the test piece dimensions, and the procedures to be followed to carry out self-restraint hot cracking tests.The following tests are described: T-joint weld cracking test; weld metal tensile test; longitudinal bend test.The tests are designed to provide information about the hot

38、 cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials.This part of ISO 17641 applies primarily to fully austenitic stainless steels, nickel, nickel base, and nickel copper weld metals. This part of ISO 17641 can also be used for other weld metals.Thi

39、s part of ISO 17641 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated referenc

40、es, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5173, Destructive tests on welds in metallic materials Bend testsISO 5178, Destructive tests on welds in metallic materials Longitudinal tensile test on we

41、ld metal in fusion welded jointsISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperatureISO 15614-1, Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel an

42、d nickel alloysISO 15792-1, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloysISO 17641-1:2004, Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 1: General3 Terms and d

43、efinitionsFor the purposes of this document, the terms and definitions given in ISO 17641-1:2004 apply.DIN EN ISO 17641-2:2016-03 EN ISO 17641-2:2015 (E) 5 4 Symbols, designations, and unitsFor the purposes of this part of ISO 17641, the symbols and units given in Table 1 apply.Table 1 Symbols, desi

44、gnations, and unitsSymbol Designation UnitT-joint weld cracking testa1Throat thickness of weld bead 1 mma2Throat thickness of weld bead 2 mmt1Thickness of vertical plate, form C mmt2Thickness of horizontal plate, form C mmWeld metal tensile testd Specimen diameter mmLcTest leng th mmLoMeasuring leng

45、th on the test specimen mmLeMeasuring length on the test specimen after fractureammLtTot al leng th mmLMFTotal crack length of all detected cracks 0,1 mm mmI1Length of an individual crack mmMSI(TT)Microcracks sensitivity indicator (tensile test)bmm/mm2Longitudinal bend test (LBT)R Radius of the test

46、 specimen edges 1 mmB Width of the test specimen mmb1Width of outside fusion line mml1Length of an individual crack mmloLength of crack examination area before bending mmLMFTotal crack length of all detected cracks 0,1 mmLsMaximum width of the weld after machining mmMSI(LBT)Microcrack sensitivity in

47、dicator (longitudinal bend test)cmm/mm2aX1+ X2= Le(see Figure 4).bMSI = LMF/(Lo d ).cMSI = LMF/(b lo).5 PrincipleThree test methods are described which are designed to measure the sensitivity of weld metals to the types of hot cracking described in Clause 3. These test methods are described in Table

48、 2.In all cases, the cracks are generated during the welding of the test pieces. The tensile test and longitudinal bend test are subjected to additional straining which does not generate any new cracks, but widens the cracks formed during the welding which enables them to be more easily detected and measured.DIN EN ISO 17641-2:2016-03 EN ISO 17641-2:2015 (E) 6