DIN EN ISO 15186-1-2003 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements (ISO 15186-1 2000) .pdf

《DIN EN ISO 15186-1-2003 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements (ISO 15186-1 2000) .pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 15186-1-2003 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements (ISO 15186-1 2000) .pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 91.120.20Akustik Bestimmung der Schalldmmung in Gebuden und von Bauteilen aus Schallintensittsmes-sungen Teil 1: Messungen im Prfstand (ISO 15186-1 : 2000)European Standard EN ISO 15186-1 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard

2、 has been published in accordance with a decision taken by CEN/TC 126 to adopt, withoutalteration, International Standard ISO 15186-1 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Ma-terials Testing Standards Committee), Techni

3、cal Committee Schalldmmung und Schallabsorption, Mes-sung und Bewertung.Ref. No. DIN EN ISO 15186-1 : 2003-12English price group 11 Sales No. 111104.04DEUTSCHE NORM December 2003EN ISO 15186-1Continued overleaf.EN comprises 16 pages. No part of this standard may be reproduced without the prior permi

4、ssion ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Measurement of sound insulation in buildings andof building elements using sound intensityPart 1: Laboratory measurements(ISO 15186-1 :

5、2000)English version of DIN EN ISO 15186-1English versionICS 91.120.20AcousticsMeasurement of sound insulation in buildings andof building elements using sound intensityPart 1: Laboratory measurements(ISO 15186-1 : 2000) 2003. CEN All rights of exploitation in any form and by any meansreserved world

6、wide for CEN national members.Ref. No. EN ISO 15186-1 : 2003 EAkustik Bestimmung der Schalldm-mung in Gebuden und von Bauteilenaus Schallintensittsmessungen Teil 1: Messungen im Prfstand(ISO 15186-1 : 2000)This European Standard was approved by CEN on 2003-07-02.CEN members are bound to comply with

7、the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or

8、to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN m

9、embers are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.EN ISO 15186-1July 2003Manage

10、ment Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungAcoustique Mesurage par intensitde lisolation acoustique des immeu-bles et des lments de construction Partie 1: Mesurages en laboratoire(ISO 15186-1 : 200

11、0)Page 2EN ISO 15186-1 : 2003ForewordInternational StandardISO 15186-1 : 2000 Acoustics Measurement of sound insulation in buildings and of building elements usingsound intensity Part 1: Laboratory measurements,which was prepared by ISO/TC 43 Acoustics of the International Organization for Standardi

12、zation, has beenadopted by Technical Committee CEN/TC 126 Acoustic properties of building products and of buildings, theSecretariat of which is held by AFNOR, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or

13、by endorsement, and conflicting national standards withdrawn, by January 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, De

14、nmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.Endorsement noticeThe text of the International Standard ISO 15186-1 : 2000 was approved by CEN as a European St

15、andardwithout any modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).23336781111131415Page 3EN ISO 15186-1 : 2003Page 4EN ISO 15186-1 : 2003Page 5EN ISO 15186-1 : 2003Page 6EN ISO 15186-1 : 2003Page 7EN ISO 15186-1 : 2003Page 8EN ISO 15186-1 : 2003Page 9EN ISO 15186-1 : 2003Page 10EN ISO 15186-1 : 2003Page 11EN ISO 15186-1 : 2003Page 12EN ISO 15186-1 : 2003Page 13EN ISO 15186-1 : 2003Page 14EN ISO 15186-1 : 2003Page 15EN ISO 15186-1 : 2003Page 16EN ISO 15186-1 : 2003