DIN EN ISO 15138-2008 Petroleum and natural gas industries - Offshore production installations - Heating ventilation and air-conditioning (ISO 15138 2007) English version EN ISO 15.pdf

《DIN EN ISO 15138-2008 Petroleum and natural gas industries - Offshore production installations - Heating ventilation and air-conditioning (ISO 15138 2007) English version EN ISO 15.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 15138-2008 Petroleum and natural gas industries - Offshore production installations - Heating ventilation and air-conditioning (ISO 15138 2007) English version EN ISO 15.pdf（115页珍藏版）》请在麦多课文档分享上搜索。

1、Juli 2008DEUTSCHE NORM Normenausschuss Erdl- und Erdgasgewinnung (NG) im DINNormenausschuss Maschinenbau (NAM) im DINPreisgruppe 32DIN Deutsches Institut fr Normung e.V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e.V., Berlin, gestattet

2、.ICS 75.180.10!$L0t“1411381www.din.deDDIN EN ISO 15138Erdl- und Erdgasindustrie Offshore-Produktionsanlagen Heizung, Lftung und Klimatisierung (ISO 15138:2007);Englische Fassung EN ISO 15138:2007Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-condi

3、tioning (ISO 15138:2007);English version EN ISO 15138:2007Industries du ptrole et du gaz naturel Plates-formes de production en mer Chauffage, ventilation et climatisation (ISO 15138:2007);Version anglaise EN ISO 15138:2007Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 BerlinErsatz frDIN EN

4、 ISO 15138:2003-05www.beuth.deGesamtumfang 115 Seiten2 Nationales Vorwort Diese Europische Norm wurde vom Technischen Komitee CEN/TC 12 Materialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgasindustrie“ erarbeitet, dessen Sekretariat von AFNOR (Frankreich) gehalten wird

5、. Es handelt sich hierbei um die unvernderte bernahme von ISO 15138:2007, erarbeitet vom ISO/TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“, Subkomitee SC 6 Processing equipment and systems“ (Sekretariat: AFNOR, Frankreich). Fr Deutschland

6、 hat hieran der NA 109-00-01 AA Materialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgasindustrie“ im Normenausschuss Erdl- und Erdgasgewinnung (NG) mitgearbeitet. Diese Europische Norm enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 1/2004 nur die englische Or

7、iginalfassung der ISO-Norm. nderungen Gegenber DIN EN ISO 15138:2003-05 wurden folgende nderungen vorgenommen: a) das Corrigendum 1:2001 wurde eingearbeitet; b) Abschnitt 3 ber Begriffe wurde ergnzt; c) Abschnitt 5 ber die Auslegung wurde hinsichtlich Auslegungsgrundlagen, Systemauslegung und in Bez

8、ug auf spezielle Einsatzbereiche gendert und erweitert; d) der neue Anhang A (normativ) bercksichtigt Anforderungen an Ausrstung und Siloauswahl; e) Anhang B (normativ) ber die Installation und Kommissionierung wurde gendert; f) Anhang C (informativ) ber Betrieb und Instandhaltung wurde gendert; g)

9、Anhang D ber die Datenbltter wurde umgestaltet; h) Anhang F ber Standarddaten fr Flansche ist normativ. Frhere Ausgaben DIN EN ISO 15138: 2003-05 DIN EN ISO 15138:2008-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN ISO 15138 December 2007 ICS 75.180.10 Supersedes EN ISO 15138:2000English Ver

10、sion Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning(ISO 15138:2007) Industries du ptrole et du gaz naturel Plates-formes de production en mer Chauffage, ventilation et climatisation(ISO 15138:2007) Erdl- und Erdgasindustrie Offshore-P

11、roduktionsanlagen Heizung, Lftung und Klimatisierung(ISO 15138:2007) This European Standard was approved by CEN on 14 December 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national stan

12、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other

13、 language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, F

14、inland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exp

15、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15138:2007: EEUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Contents Page123455.15.25.35.45.55.6EN ISO 15138:2007 (E)2Foreword. 3 Terms and defini

16、tions. 5 Design 7 Introduction . 7 Development of design basis 10 System design General . 31 Area-specific system design . 35 Equipment and bulk selection. 45 Scope . 4 Normative references . 4 Annex B (normative) Installation and commissioning . 67 Annex C (informative) Operation and maintenance 72

17、 Annex D (informative) Datasheets 75 Annex E (normative) Standard data for flanges 109 Installation and commissioning 45 Bibliography . 112 Abbreviated terms 6 Annex A (normative) Equipment and bulk selection 46 DIN EN ISO 15138:2008-07 Foreword This document (EN ISO 15138:2007) has been prepared by

18、 Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“, the secretariat of which

19、is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility

20、 that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 15138:2000. According to the CEN/CENELEC Internal Regulations, the national standards organ

21、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

22、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 15138:2007 has been approved by CEN as a EN ISO 15138:2007 without any modification. EN ISO 15138:2007 (E)3DIN EN ISO 15138:2008-07 1 Scope This International Standard specifies requireme

23、nts and provides guidance for design, testing, installation and commissioning of heating, ventilation, air-conditioning and pressurization systems and equipment on all offshore production installations for the petroleum and natural gas industries that are new or existing, normally occupied by person

24、nel or not normally occupied by personnel, fixed or floating but registered as an offshore production installation. For installations that can be subject to “Class” or “IMO/MODU Codes b) acceptable air quality in all adverse weather conditions; c) reliable performance through concept selection, the

25、design having the following features in decreasing order of importance: 1) simplicity, with a preference for passive systems, 2) inherent robustness by providing design margins for systems and equipment, 3) fault/status indication and self diagnostics, 4) sparing of systems and equipment, 5) maintai

26、nability through testability, inspectability and ease of access. The following additional requirements apply to specific areas in the installation to ensure their safety goals are met: maintain the survivability in the TR by preventing ingress of potentially flammable gas-air mixtures through approp

27、riate siting, isolation, pressurization, provision of multiple air-intake locations, sufficient number of air changes, gas detection and emergency power supply; EN ISO 15138:2007 (E)7DIN EN ISO 15138:2008-07 prevent the formation of potentially hazardous concentrations of flammable gaseous mixtures

28、in hazardous areas by the provision of sufficient ventilation and air distribution for the dilution, dispersion and removal of such mixtures, and contain such mixtures, once formed, through maintaining relative pressures, avoiding cross-contamination and providing dedicated systems for hazardous are

29、as; prevent, through pressurization, the ingress of potentially flammable gas-air mixtures into all designated non-hazardous areas; maintain ventilation to all equipment and areas/rooms that are required to be operational during an emergency when the main source of power is unavailable; provide a hu

30、midity- and temperature-controlled environment in which personnel, plant and systems can operate effectively, free from odours, dust and contaminants, including smoke control. These high-level goals are supported by the lower-level functional requirements that are stated later in the appropriate sub

31、clauses of this International Standard. Functional requirements in the development of a basis of design for either a new project or major modification to an existing installation are the focus of 5.2. These requirements are related to the following: platform orientation and layout (5.2.1); hazard id

32、entification and hazardous-area classification (5.2.2); environmental conditions (5.2.3); choice of natural or mechanical ventilation systems (5.2.4); development of the controls philosophy (5.2.5); operating and maintenance philosophy (5.2.6); materials selection (5.2.7); design margins and calcula

33、tions (5.2.8); design development and validation using wind-tunnel testing or computational fluid dynamics (CFD); (5.2.9).Ventilation may be natural (i.e. the wind) or mechanical or a combination of both. Throughout this International Standard, the use of the term “ventilation” should be taken to in

34、clude either natural or mechanical ventilation, as appropriate. Natural ventilation is preferred over mechanical ventilation, where practical, since it is available throughout gas emergencies, does not rely on active equipment and reduces effort required for HVAC maintenance. For new designs, the de

35、velopment of a design basis shall be progressed using the practices that are identified in this International Standard, though it should be recognized that it involves a process of iteration as the design matures and does not take place as the sequential series of steps used in this International St

36、andard to facilitate presentation. The processes outlined here are equally applicable to major redevelopments of existing installations, but it can be necessary to make some compromise as a result of historical decisions regarding layout, equipment selection and the prevailing level of knowledge at

37、the time. The challenge of providing cost-effective solutions in redevelopment can be significantly greater than for a new design. The finalized basis of design may be recorded on datasheets such as those provided in Annex D. The completed design shall be subject to hazard-assessment review. The haz

38、ard and operability study (HAZOP) technique may be used for this. EN ISO 15138:2007 (E)8DIN EN ISO 15138:2008-07 In 5.2, objectives are identified which establish the goals. Detailed requirements that enable the objectives to be achieved are outlined. It is the responsibility of the user to assess w

39、hether the requirements in this International Standard are acceptable to the local regulator. In 5.3, the fundamental choice in system design, i.e. between natural and mechanical methods of ventilation, is addressed. The functional requirements associated with the design of HVAC systems for differen

40、t areas of a typical offshore installation that require particular technical considerations due to their location and/or their function are given in 5.4. Figure 1 is intended to illustrate the processes undertaken at various stages of the installation life cycle and to identify reference documents a

41、nd the appropriate subclauses of this International Standard that provide the necessary requirements. Figure 1 Application of this International Standard to a project life cycle EN ISO 15138:2007 (E)9DIN EN ISO 15138:2008-07 5.2 Development of design basis 5.2.1 Orientation and layout 5.2.1.1 Object

42、ive The objective is to provide input into the early stages of design development so that areas and equipment that can have a requirement for HVAC, or be affected by its provision, are sited in an optimum location, so far as is reasonably practicable. 5.2.1.2 Functional requirements Installation lay

43、out requires a great deal of coordination between the engineers involved during design and the operation, maintenance and safety specialists. Attention shall also be paid to the minimization of construction, offshore hook-up and commissioning. It is not the intention of this International Standard t

44、o detail a platform-layout philosophy, but to identify areas where considerations of the role of HVAC, and requirements for it, can have an impact in the decision making surrounding installation orientation and layout. Installations can have a temporary refuge (TR). The TR is in almost all cases the

45、 living quarters (LQ), where they are provided. The survivability of the TR, which is directly related to the air leakage rate, can introduce consideration of active HVAC systems for pressurization of the TR or enclosed escape and evacuation routes. Active systems require detailed risk-assessment ex

46、ercises to be undertaken as part of the design verification, and passive systems are generally preferred since they do not rely on equipment functioning under conditions of emergency. Hazardous areas, particularly those containing pressurized hydrocarbon systems, should be located as far as practica

47、ble from the TR, so that any gas leaks are naturally dispersed. The layout shall include correct positioning of ventilation inlets and outlets, engine inlets and exhausts, vents and flares to allow for safe operation, particularly of the TR. Hot exhausts shall not interfere with crane, helicopter, p

48、roduction or drilling operations or the LQ, and shall be directed so as not to be drawn into gas-turbine air intakes. Air intakes to hazardous and non-hazardous areas shall be located as far as is reasonably practicable from the perimeter of a hazardous envelope and not less than the minimum distanc

49、e specified in the prevailing area classification code. The location of the air inlet shall also be evaluated for availability in emergency situations. 5.2.1.3 Detailed requirements Results of wind-tunnel model tests or CFD calculations on the installations shall be used as a basis for determining the external zone(s) of wind pressure in which to locate the intake(s) and outlet(s) for the HVAC system(s). Particular care shall be taken in locating air intakes and