DIN EN ISO 14509-1-2017 Small craft - Airborne sound emitted by powered recreational craft - Part 1 Pass-by measurement procedures (ISO 14509-1 2008) German version EN ISO 14509-1 .pdf

《DIN EN ISO 14509-1-2017 Small craft - Airborne sound emitted by powered recreational craft - Part 1 Pass-by measurement procedures (ISO 14509-1 2008) German version EN ISO 14509-1 .pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 14509-1-2017 Small craft - Airborne sound emitted by powered recreational craft - Part 1 Pass-by measurement procedures (ISO 14509-1 2008) German version EN ISO 14509-1 .pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、February 2017 English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.30; 47.080!%_v“2609183ww

2、w.din.deDIN EN ISO 14509-1Small craft Airborne sound emitted by powered recreational craft Part 1: Passby measurement procedures (ISO 145091:2008);English version EN ISO 145091:2008,English translation of DIN EN ISO 14509-1:2017-02Kleine Wasserfahrzeuge Von motorgetriebenen Sportbooten abgestrahlter

3、 Luftschall Teil 1: Vorbeifahrtmessungen (ISO 145091:2008);Englische Fassung EN ISO 145091:2008,Englische bersetzung von DIN EN ISO 14509-1:2017-02Petits navires Bruit arien mis par les bateaux de plaisance motoriss Partie 1: Mthodes de mesure pour lessai de passage (ISO 145091:2008);Version anglais

4、e EN ISO 145091:2008,Traduction anglaise de DIN EN ISO 14509-1:2017-02SupersedesDIN EN ISO 145091:200901www.beuth.deDocument comprises 26 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.17 DIN EN ISO 14509-1:2017-02 2 A comm

5、a is used as the decimal marker. National foreword This document (EN ISO 14509-1:2008) has been prepared by Technical Committee ISO/TC 188 “Small craft, in collaboration with ISO /TC 43/SC 1 “Noise”. The responsible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderun

6、g und Schwingungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-01-08 AA Geruschemissionsmessungen an Wasserfahrzeugen einschlielich Messungen im Fahrgastraum und am Arbeitsplatz. The DIN Standards correspondin

7、g to the International Standards referred to in the main text and in the Bibliography are as follows: ISO 60942 DIN EN 60942 ISO 61672-1 DIN ISO 61672-1 ISO 2922 DIN EN ISO 2922 ISO 3744 DIN EN ISO 3744 ISO 8178-4 DIN EN ISO 8178-4 ISO 8665 DIN EN ISO 8665 ISO 8666 DIN EN ISO 8666 ISO 10087 DIN EN I

8、SO 10087 ISO 12001 DIN EN ISO 12001 The German Standards are given in National Annex NA “Bibliography”. Amendments This standard differs from DIN EN ISO 14509:2001-03 as follows: a) specifications for standard craft-based type tests with integral exhaust systems have been included; b) test site spec

9、ifications now include the water depth; c) as regards environmental conditions, a differentiation is no longer made between planing craft and non-planing craft; d) a lower maximum permissible wind velocity during the test has been specified; e) for longer craft, a lower maximum permissible wave heig

10、ht during the test has been specified; f) specifications relating to the uncertainty of measurement have been rendered more precise. Compared with DIN EN ISO 14509:2009-01, the following corrections have been made: a) In Clause 10.9, the second and the fourth sentence have been clarified by correcti

11、ng the translation; b) In Clause A.4.2, the first sentence has been corrected. Previous editions DIN EN ISO 14509: 2001-03 DIN EN ISO 14509/A1: 2004-12 DIN EN ISO 14509-1: 2009-01 DIN EN ISO 14509-1:2017-02 3 National Annex NA (informative) Bibliography DIN EN 60942, Electroacoustics Sound calibrato

12、rs DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN EN ISO 2922, Acoustics Measurement of airborne sound emitted by vessels on inland waterways and harbours DIN EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sou

13、nd pressure Engineering methods for an essentially free field over a reflecting plane DIN EN ISO 8178-4, Reciprocating internal combustion engines Exhaust emission measurement Part 4: test cycles for various engine applications DIN EN ISO 8665, Small craft Marine propulsion reciprocating internal co

14、mbustion engines Power measurements and declarations DIN EN ISO 8666, Small craft Principal data DIN EN ISO 10087, Small craft Craft identification Coding system DIN EN ISO 12001, Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code DIN EN I

15、SO 14509-1:2017-02 4 This page is intentionally blank EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 14509-1October 2008ICS 17.140.30; 47.080 Supersedes EN ISO 14509:2000 English VersionSmall craft - Airborne sound emitted by powered recreationalcraft - Part 1: Pass-by measurement procedures(

16、ISO 14509-1:2008)Petits navires - Bruit arien mis par les bateaux deplaisance motoriss - Partie 1: Mthodes de mesure pourlessai de passage (ISO 14509-1:2008)Kleine Wasserfahrzeuge - Von motorgetriebenenSportbooten abgestrahlter Luftschall - Teil 1:Vorbeifahrtmessungen (ISO 14509-1:2008)This European

17、 Standard was approved by CEN on 24 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni

18、ng such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own lang

19、uage and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe

20、mbourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights

21、 of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14509-1:2008: EContents Page Foreword. 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions. 4 4 Symbols . 7 5 Measurement quantity 7 6 Measurement uncertainty 7 7 Measuring equipment

22、. 8 8 Test site specifications and environmental conditions 8 9 Test course, microphone positions and measurement distance 9 10 Operating conditions 11 11 Test procedure 12 12 Test report . 12 13 Standard craft specifications for outboard motor type tests according to Clause 10 13 14 Standard craft

23、specifications for type tests for stern drives with integral exhaust systems according to Clause 10. 14 Annex A (normative) Measurement of the sound exposure level. 15Annex B (informative) Example of test report form 19 Bibliography . 21 Figures Figure 1 Position of the microphone and test course. 1

24、0 Figure 2 Microphone position and heights. 10 Tables Table 1 Standard deviation of reproducibility of individual sources of measurement 7 Table 2 Variability for a coverage probability of 90 %. 7 Table 3 Correction for background sound pressure level, LpAS, for monitoring tests. 9 Table 4 Standard

25、craft specifications . 13 Table 5 Standard craft specifications for petrol engines 14 Table 6 Standard craft specifications for diesel engines 14 Table A.1 Standard deviation of reproducibility of individual sources of measurement 15 Table A.2 Variability for a coverage probability of 90 % . 16 Tabl

26、e A.3 Correction for background sound exposure level, LAE, for monitoring tests 17 EN ISO 14509-1:2008 (E) DIN EN ISO 14509-1:2017-02 2 Foreword This document (EN ISO 14509-1:2008) has been prepared by Technical Committee ISO/TC 188 “Small craft“ in collaboration with Technical Committee CEN/SS T01

27、“Shipbuilding and maritime structures” the secretariat of which is held by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at

28、 the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 14509:2000. This document h

29、as been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive. For relationship with EC Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELE

30、C Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

31、rg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 14509-1:2008 has been approved by CEN as a EN ISO 14509-1:2008 without any modification. EN ISO 14509-1:2008 (E) DIN EN ISO 14509-1:201

32、7-02 3 1 Scope This part of ISO 14509 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull, including inboards, stern drives

33、, personal watercraft (PWC) and outboard motors. It also specifies standard craft based type tests for stern drives with integral exhaust systems and for outboard motors. It also specifies the procedure to be followed if, in addition to the maximum sound pressure level, the determination of the soun

34、d exposure level is desired. NOTE For craft other than those specified above, ISO 2922 is applicable for sound emission measurements. The accuracy grade of the acoustical test procedures specified in this part of ISO 14509 is engineering grade (grade 2). 2 Normative references The following referenc

35、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8665, Small craft Marine propulsion reciprocating internal combusti

36、on engines Power measurements and declarations ISO 8666:2002, Small craft Principal data ISO 10087, Small craft Craft identification Coding system IEC 60942, Electroacoustics Sound calibrators IEC 61672-1, Electroacoustics Sound level meters Part 1: Specifications 3 Terms and definitions For the pur

37、poses of this document, the following terms and definitions apply. 3.1 type test for recreational craft type test measurement performed to prove that the sound of the craft in motion, or of the outboard motor when using a standard craft, or of the stern drive with integral exhaust system when using

38、a standard craft, complies with sound specifications or prescribed limits NOTE See also definition of “acceptance test” in ISO 2922. 4EN ISO 14509-1:2008 (E) DIN EN ISO 14509-1:2017-02 3.2 monitoring test for recreational craft monitoring test measurement performed in order to check that the sound o

39、f the craft in motion, or of the outboard motor when using any craft, or of the stern drive with integral exhaust system when using any craft, is still within prescribed limits and that no noticeable changes have occurred since the acceptance on initial delivery or after modification, as applicable

40、NOTE 1 Subsequent type testing can also be required in the case of a significant change. NOTE 2 See also definition of “monitoring test” in ISO 2922. 3.3 maximum A-frequency weighted sound pressure level with time weighting S for recreational craft maximum AS-weighted sound pressure level LpASmaxmax

41、imum sound pressure level achieved from measurement of the passage of the craft under specified operating conditions measured with frequency weighting A and with time weighting S (slow) according to IEC 61672-1 NOTE It is expressed in decibels (dB). 3.4 A-weighted sound exposure EA,Tintegral of the

42、square of the A-weighted sound pressure, p, over a stated time interval or event of duration T (starting at t1and ending at t2) ()212A, AdtTtE ptt=(1) NOTE 1 Unit: pascal squared second, Pa2s. NOTE 2 By practical limitations of the measuring instruments, p2is always understood to denote the square o

43、f a frequency-weighted and frequency-band-limited sound pressure. The application of a specific frequency weighting as specified in IEC 61672-1 is indicated by an appropriate subscript, e.g. EA,1hdenotes the A-weighted sound exposure over one hour. NOTE 3 When applied to a single event of impulsive

44、or intermittent sound, the quantity is called “single event sound exposure” and the symbol E is used without subscript. NOTE 4 This definition applies only for the optional measurement of sound exposure levels according to Annex A. NOTE 5 Adapted from ISO/TR 25417:2007, 2.6. 3.5 A-weighted sound exp

45、osure level LE,A,Tten times the logarithm to the base 10 of the ratio of the A-weighted sound exposure, EA,T, to a reference value, E0, expressed in decibels A,A,010 lg dBTETELE=(2) NOTE 1 The reference value, E0, is (20 Pa)2s = 4 1010Pa s. NOTE 2 The application of a specified frequency weighting a

46、s specified in IEC 61672-1 is indicated by an appropriate subscript, e.g. LE,A,T,1hdenotes the A-weighted sound exposure level over one hour. 5EN ISO 14509-1:2008 (E) DIN EN ISO 14509-1:2017-02 NOTE 3 When applied to a single event of impulsive or intermittent sound, the quantity is called “single e

47、vent sound exposure level” and the symbol LEis used without further subscript. NOTE 4 In this part of ISO 14509, the sound exposure level is to characterize the emission of the source and not the noise impact on people exposed to the sound. NOTE 5 This definition applies only for the optional measur

48、ement of sound exposure level according to Annex A. NOTE 6 Adapted from ISO/TR 25417:2007, 2.6. 3.6 background noise for recreational craft background noise noise from all sources other than the craft under test EXAMPLE Noise from waves splashing on the measuring craft or the shore, other craft or equipment, and wind effects. 3.7 stern-drive propulsion unit with the engine inboard and the transmission/drive located external to the hull 3.8 stern-drive with integral exhaust systems stern-drive where the exhaust gases are expe