DIN EN ISO 14329-2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot seam and projection welds (ISO 14329 2003) Germ.pdf

《DIN EN ISO 14329-2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot seam and projection welds (ISO 14329 2003) Germ.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 14329-2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot seam and projection welds (ISO 14329 2003) Germ.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、European Standard EN ISO 14329 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 121 Welding (Secre-tariat: Denmark) to adopt, without alteration, International Standard ISO 14

2、329 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Schweitechnik (Weld-ing Standards Committee), Technical Committee Zerstrende Prfung von Schweiverbindungen.ICS 25.160.40Widerstandspunktschweien Zerstrende Prfung von Schweiverbindungen Bruchar

3、ten undgeometrische Messgren fr Widerstandspunkt-, Rollennaht- und Buckelschweiungen(ISO 14329 : 2003)Ref. No. DIN EN ISO 14329 : 2003-12English price group 09 Sales No. 110904.04DEUTSCHE NORM December 2003EN ISO 14329Continued overleaf.EN comprises 12 pages. No part of this standard may be reproduc

4、ed without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Resistance welding Destructive tests of weldsFailure types and geometric measurements for resistancespot, seam

5、and projection welds(ISO 14329 : 2003)English version of DIN EN ISO 14329English versionICS 25.160.40Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungResistance welding Destructive tests of weldsFa

6、ilure types and geometric measurements forresistance spot, seam and projection welds(ISO 14329 : 2003) 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 14329 : 2003 ESoudage par rsistance Essaisdestructifs des soudures Type

7、derupture et dimensions gomtriquespour les assemblages souds parrsistance par points, la molette etpar bossages (ISO 14329 : 2003)Widerstandspunktschweien Zerstrende Prfung von Schwei-verbindungen Brucharten und geo-metrische Messgren fr Wider-standspunkt-, Rollennaht- und Bu-ckelschweiungen (ISO 14

8、329 : 2003)This European Standard was approved by CEN on 2003-06-05.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical r

9、eferences concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into i

10、ts own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norw

11、ay, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.July 2003EN ISO 14329Page 2EN ISO 14329 : 2003ForewordInternational StandardISO 14329 : 2003 Resistance welding Destructive tests of welds Failure types and geometric measure-ments for resistance spot, seam and projection weld

12、s,which was prepared by ISO/TC 44 Welding and allied processes of the International Organization for Stand-ardization, has been adopted by Technical Committee CEN/TC 121 Welding, the Secretariat of which is heldby Denmark, as a European Standard.This European Standard shall be given the status of a

13、national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by January 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement

14、 this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.Endorsement noticeThe text of the International

15、Standard ISO 14329 : 2003 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 14329 : 2003Page 4EN ISO 14329 : 2003Page 5EN ISO 14329 : 2003Page 6EN ISO 14329 : 2003Page 7EN ISO 14329 : 2003Page 8EN ISO 14329 : 2003Page 9EN ISO 14329 : 2003Page 10EN ISO 14329 : 2003Page 11EN ISO 14329 : 2003Page 12EN ISO 14329 : 2003