DIN EN ISO 12402-2 A1-2010 Personal flotation devices - Part 2 Lifejackets performance level 275 - Safety requirements - Amendment 1 (ISO 12402-2 2006 Amd 1 2010) German version EN.pdf

《DIN EN ISO 12402-2 A1-2010 Personal flotation devices - Part 2 Lifejackets performance level 275 - Safety requirements - Amendment 1 (ISO 12402-2 2006 Amd 1 2010) German version EN.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 12402-2 A1-2010 Personal flotation devices - Part 2 Lifejackets performance level 275 - Safety requirements - Amendment 1 (ISO 12402-2 2006 Amd 1 2010) German version EN.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、November 2010 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 13.340.70!$l1a“1731462www.din.deDDIN EN ISO 12402-2/A1Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements Amendment 1 (ISO 12402-2:2006/Amd 1:2010)English translation of DIN EN ISO 12402-2/A1:2010-11Persnliche Auftriebsmittel Teil 2: Rettungswesten, Stufe 275

3、Sicherheitstechnische Anforderungen nderung 1 (ISO 12402-2:2006/Amd 1:2010)Englische bersetzung von DIN EN ISO 12402-2/A1:2010-11quipements individuels de flottabilit Partie 2: Gilets de sauvetage, niveau de performance 275 Exigences de scurit Amendement 1 (ISO 12402-2:2006/Amd 1:2010)Traduction ang

4、laise de DIN EN ISO 12402-2/A1:2010-11ModifiesDIN EN ISO 12402-2:2006-12www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 8 pages 11.10 DIN EN ISO 12402-2/A1:2010-11 2 National foreword This standard has been prepared by Technical Committ

5、ee ISO/TC 188 “Small craft” (Secretariat: SIS, Sweden) in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Sport- und

6、Freizeitgert (Sports Equipment Standards Committee), Working Committee NA 112-04-04 AA Wasserrettungs- und Sicherheitsmittel. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12402-2:2006/A1 June 2010 ICS 13.340.70 English Version Personal flotation devices - Part 2: Lifejackets, performance

7、 level 275 - Safety requirements - Amendment 1 (ISO 12402-2:2006/Amd 1:2010) quipements individuels de flottabilit - Partie 2: Gilets de sauvetage, niveau de performance 275 - Exigences de scurit - Amendement 1 (ISO 12402-2:2006/Amd 1:2010)Persnliche Auftriebsmittel - Teil 2: Rettungswesten, Stufe 2

8、75 - Sicherheitstechnische Anforderungen - nderung 1 (ISO 12402-2:2006/Amd 1:2010) This amendment A1 modifies the European Standard EN ISO 12402-2:2006; it was approved by CEN on 5 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

9、inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This amendment exists in three official version

10、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, B

11、ulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE

12、FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12402-2:2006/A1:2010: EEN ISO 12402-2:2

13、006/A1:2010 (E) Contents Page Foreword 3Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC 2 6DIN EN ISO 12402-2/A1:2010-11 Foreword This document (EN ISO 12402-2:2006/A1:2010) has been prepared by Technical Committee ISO/TC 1

14、88 Small craft” in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of which is held by DIN. This Amendment to the European Standard EN ISO 12402-2:2006/Amd 1:2010 shall be given the status of a national standar

15、d, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

16、 CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with

17、 EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Re

18、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12402-2:2006/A

19、md 1:2010 has been approved by CEN as a EN ISO 12402-2:2006/A1:2010 without any modification. “ DIN EN ISO 12402-2/A1:2010-11 EN ISO 12402-2:2006/A1:2010 (E) 3 Page 1, Clause 2 Replace “ISO 12402-7:1)” with “ISO 12402-7:2006” and delete footnote 1) at the bottom of the page. Page 4, 5.1 In the first

20、 paragraph, delete the second sentence: “The temperature cycling test and the rotating shock bin test shall be considered as reliability against wear and tear and shall be conducted prior to the appropriate physical properties test.” In the third paragraph, last sentence, replace “ISO 12402-7:3)” wi

21、th “ISO 12402-7:2006” and delete footnote 3) at the bottom of the page. Page 6, 5.3.2.2 Add the following sentence at the end of 5.3.2.2: “The time from immersion until initiation of inflation in automatic mode shall not exceed 5 s.” Page 6, 5.3.3 Replace subclauses 5.3.3.1 and 5.3.3.2 with the foll

22、owing: “5.3.3.1 Any inherently buoyant material used to provide buoyancy shall be capable of withstanding compression and movement in normal wear without sustaining permanent loss of buoyancy.” “5.3.3.2 Any inherently buoyant material shall prove to have properties in accordance with ISO 12402-7:200

23、6, 4.8.” Delete footnote 4) from the bottom of the page. Page 7, 5.4.1 In the first paragraph, replace “ISO 12402-7:5), 4.3.3” with “ISO 12402-7:2006, 4.3.3” and delete footnote 5) from the bottom of the page. DIN EN ISO 12402-2/A1:2010-11 EN ISO 12402-2:2006/A1:2010 (E) 4 Page 7, 5.5 Add the follow

24、ing sentence at the end of 5.5: “The load shall be maintained for 30 min, if not specified otherwise.” Page 10, 6.2 In the third paragraph (i.e. paragraph after list item v) and NOTE), replace the second sentence with the following: “The label shall not shrink more than 10 % after washing.” DIN EN I

25、SO 12402-2/A1:2010-11 EN ISO 12402-2:2006/A1:2010 (E) 5 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free

26、Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 89/686/EEC. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compli

27、ance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. DIN EN ISO 12402-2/A1:2010-11 EN ISO 12402- :2006/A1:2010 (E) 6 2