DIN EN ISO 11855-1-2016 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 1 Definition symbols and c.pdf

《DIN EN ISO 11855-1-2016 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 1 Definition symbols and c.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11855-1-2016 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 1 Definition symbols and c.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、November 2016 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.10; 91.140.30!%v)“258830

2、6www.din.deDIN EN ISO 11855-1Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 1: Definition, symbols and comfort criteria (ISO 118551:2012);English version EN ISO 118551:2015,English translation of DIN EN ISO 11855-1:2016

3、-11Umweltgerechte Gebudeplanung Planung, Auslegung, Installation und Steuerung flchenintegrierter Strahlheizungs und khlsysteme Teil 1: Begriffe, Symbole und Komfortkriterien (ISO 118551:2012);Englische Fassung EN ISO 118551:2015,Englische bersetzung von DIN EN ISO 11855-1:2016-11Conception de lenvi

4、ronnement des btiments Conception, construction et fonctionnement des systmes de chauffage et de refroidissement par rayonnenment Partie 1: Dfinition, symboles et critres de confort (ISO 118551:2012);Version anglaise EN ISO 118551:2015,Traduction anglaise de DIN EN ISO 11855-1:2016-11SupersedesDIN E

5、N ISO 118551:201511www.beuth.deDocument comprises ux pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16DIN EN ISO 11855-1:2016-11 2 A comma is used as the decimal marker. National foreword The text of ISO 11855-1:2012 has be

6、en prepared by Technical Committee ISO/TC 205 “Building environment design” and has been taken over as EN ISO 11855-1:2015 by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings” (Secretariat: DIN, Germany). The responsible German body involved in its prepara

7、tion was DIN-Normenausschuss Heiz- und Raumlufttechnik (DIN Standards Committee Heating and Ventilation Technology), Working Committee NA 041-01-58 AA Heizungsanlagen und wassergefhrte Khlanlagen in Gebuden (SpA CEN/TC 228). The DIN Standards corresponding to the International Standards referred to

8、in this document are as follows: ISO 7726 DIN EN ISO 7726 ISO 7730 DIN EN ISO 7730 ISO 13731 DIN EN ISO 13731 Amendments This standard differs from DIN EN 15377-1:2009-02 as follows: a) comfort conditions have been described in more detail; b) acoustical aspects of the heating system are now covered

9、; c) methods of determining the heating and cooling capacity are dealt with in DIN EN ISO 11855-2; d) the standard has been editorially revised. Compared with DIN EN ISO 11855-1:2015-11, the following corrections have been made: a) a national footnote has been included in Clause 3; b) in Subclause 3

10、.35, the letter symbol denoting the heating or cooling surface area has been corrected to read “AF” instead of “Af” (applies to the German version only); c) the term “maximale zulssige Oberflchentemperatur” given in Subclause 3.45 has been corrected to read “maximale Auslegungs-Wrmestromdichte”. In

11、addition, a national footnote on the underlying error in Subclause 2.45 of the original ISO document (where “maximum permissible surface temperature” is incorrectly stated instead of “maximum design heat flow density”) has been included; d) in Subclause 3.88, the letter symbol denoting the thermal o

12、utput of surface system has been corrected to read “QS” instead of “QF” (applies to the German version only). Previous editions DIN EN 15377-1: 2009-02 DIN EN ISO 11855-1: 2015-11 DIN EN ISO 11855-1:2016-11 3 National Annex NA (informative) Bibliography DIN EN ISO 7726, Ergonomics of the thermal env

13、ironment Instruments for measuring physical quantities DIN EN ISO 7730, Ergonomics of the thermal environment Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria DIN EN ISO 13731, Ergonomics of the thermal env

14、ironment Vocabulary and symbols DIN EN ISO 11855-1:2016-11 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11855-1 August 2015 ICS 91.140.10; 91.140.30 Supersedes EN 15377-1:2008English Version Building environment design Design, dimensioning, installation

15、 and control of embedded radiant heating and cooling systems Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012) Conception de lenvironnement des btiments Conception, construction et fonctionnement des systmes de chauffage et de refroidissement par rayonnement Partie 1: Dfinition, s

16、ymboles et critres de confort (ISO 11855-1:2012) Umweltgerechte Gebudeplanung Planung, Auslegung, Installation und Steuerung flchenintegrierter Strahlheizungs- und -khlsysteme Teil 1: Begriffe, Symbole und Komfortkriterien (ISO 11855-1:2012) This European Standard was approved by CEN on 30 July 2015

17、. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on

18、 application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENEL

19、EC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

20、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue

21、 Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11855-1:2015 EEN ISO 11855-1:2015 (E) 2 Contents Page European foreword . 3 Foreword 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms a

22、nd definitions . 6 4 Symbols and abbreviations 15 5 Comfort criteria 20 5.1 General thermal comfort . 20 5.1.1 Operative temperature 21 5.1.2 Definition 21 5.1.3 PMV (predicted mean vote)/PPD (predicted percentage of dissatisfied) . 21 5.2 Local thermal comfort 22 5.2.1 Surface temperature limit . 2

23、2 5.2.2 Radiant temperature asymmetry . 23 5.2.3 Vertical air temperature difference 24 5.3 Acoustical comfort . 25 5.3.1 Water velocity and noise . 25 5.3.2 Acoustical comfort in water based heating and cooling systems . 25 5.3.3 Acoustical comfort in Thermally Active Building Systems (TABS) 26 Ann

24、ex A (informative) Floor surface temperature for thermal comfort 27 A.1 Acceptable range of floor surface temperature 27 A.2 Relation between floor temperature and skin temperature in electric heating system . 28 A.3 Relation between skin temperature and discomfort 29 Annex B (informative) Draught 3

25、0 B.1 Equations for the calculation of maximum air velocity and minimum air temperature along the floor caused by cold draught from cooled surfaces . 30 Bibliography . 31 DIN EN ISO 11855-1:2016-11 EN ISO 11855-1:2015 (E) 3 European foreword The text of ISO 11855-1:2012 has been prepared by Technica

26、l Committee ISO/TC 205 “Building environment design” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11855-1:2015 by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings” the secretariat of which is held by DIN. Th

27、is European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016, and conflicting national standards shall be withdrawn at the latest by February 2016. This standard is applicable for design, construct

28、ion and operation of radiant heating and cooling systems. The methods defined in part 2 are intended to determine the design heating or cooling capacity used for the design and evaluation of the performance of the system. For identifying product characteristics by testing and proving the thermal out

29、put of heating and cooling surfaces embedded in floors, ceilings and walls the standard series EN 1264 can be used. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying a

30、ny or all such patent rights. This document supersedes EN 15377-1:2008. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denma

31、rk, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement not

32、ice The text of ISO 11855-1:2012 has been approved by CEN as EN ISO 11855-1:2015 without any modification. DIN EN ISO 11855-1:2016-11 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Int

33、ernational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison w

34、ith ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technica

35、l committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to

36、the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 11855-1 was prepared by Technical Committee ISO/TC 205, Building environment design. ISO 11855 consists of the following

37、 parts, under the general title Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems: Part 1: Definition, symbols, and comfort criteria Part 2: Determination of the design and heating and cooling capacity Part 3: Design and dimens

38、ioning Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) Part 5: Installation Part 6: ControlPart 1 specifies the comfort criteria which should be considered in designing embedded radiant heating and cooling systems, since the m

39、ain objective of the radiant heating and cooling system is to satisfy thermal comfort of the occupants. Part 2 provides steady-state calculation methods for determination of the heating and cooling capacity. Part 3 specifies design and dimensioning methods of radiant heating and cooling systems to e

40、nsure the heating and cooling capacity. Part 4 provides a dimensioning and calculation method to design Thermo Active Building Systems (TABS) for energy-saving purposes, since radiant heating and cooling systems can reduce energy consumption and heat source size by using renewable energy. Part 5 add

41、resses the installation process for the system to operate as intended. Part 6 shows a proper control method of the radiant heating and cooling systems to ensure the maximum performance which was intended in the design stage when the system is actually being operated in a building. EN ISO 11855-1:201

42、5 (E) DIN EN ISO 11855-1:2016-11 4IntroductionThe radiant heating and cooling system consists of heat emitting/absorbing, heat supply, distribution, and control systems. The ISO 11855 series deals with the embedded surface heating and cooling system that directly controls heat exchange within the sp

43、ace. It does not include the system equipment itself, such as heat source, distribution system and controller.The ISO 11855 series addresses an embedded system that is integrated with the building structure. Therefore, the panel system with open air gap, which is not integrated with the building str

44、ucture, is not covered by this series.The ISO 11855 series shall be applied to systems using not only water but also other fluids or electricity as a heating or cooling medium.The object of the ISO 11855 series is to provide criteria to effectively design embedded systems. To do this, it presents co

45、mfort criteria for the space served by embedded systems, heat output calculation, dimensioning, dynamic analysis, installation, operation, and control method of embedded systems.EN ISO 11855-1:2015 (E) DIN EN ISO 11855-1:2016-11 5 1 ScopeThis part of ISO 11855 specifies the basic definitions, symbol

46、s, and a comfort criteria for radiant heating and cooling systems.The ISO 11855 series is applicable to water based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction w

47、ithout any open air gaps. It does not apply to panel systems with open air gaps which are not integrated into the building structure.The ISO 11855 series also applies, as appropriate, to the use of fluids other than water as a heating or cooling medium. The ISO 11855 series is not applicable for tes

48、ting of systems. The methods do not apply to heated or chilled ceiling panels or beams.2 Normative referencesISO 7726:1998, Ergonomics of the thermal environment Instruments for measuring physical quantitiesISO 7730:2005, Ergonomics of the thermal environment Analytical determination and interpretat

49、ion of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteriaISO 13731:2003, Ergonomics of the thermal environment Vocabulary and symbols3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. 2.1additional thermal resistancethermal resistance representing layers added to the building structure and acting mostly as thermal resistances because of their own low thermal inertiaEXAMPLE Carpets, moquette, and suspended ceilin