DIN EN ISO 11812-2003 Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812 2001) German version EN ISO 11812 2001《小艇 水密座舱和快速排干座舱》.pdf

《DIN EN ISO 11812-2003 Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812 2001) German version EN ISO 11812 2001《小艇 水密座舱和快速排干座舱》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11812-2003 Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812 2001) German version EN ISO 11812 2001《小艇 水密座舱和快速排干座舱》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 47.080Kleine Wasserfahrzeuge Wasserdichte und schnell-lenzende Plichten (ISO 11812 : 2001)European Standard EN ISO 11812 : 2001 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/CMC

2、to adopt, withoutalteration, International Standard ISO 11812 as a European Standard.The responsible German body involved in its preparation was the Normenstelle Schiffs- und Meerestechnik(Shipbuilding and Marine Technology Standards Committee).DIN EN ISO 9093-1 is the standard corresponding to Inte

3、rnational Standard ISO 9093-1 referred to inclause 2 of the EN.National Annex NAStandard referred to(and not included in Normative references)DIN EN ISO 9093-1 Small craft Seacocks and through-hull fittings Part 1: Metallic components(ISO 9093-1 : 1994)Ref. No. DIN EN ISO 11812 : 2003-07English pric

4、e group 16 Sales No. 111611.03DEUTSCHE NORM July 2003EN ISO 11812Continued overleaf.EN comprises 40 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sa

5、le for German Standards (DIN-Normen).Small craftWatertight cockpits and quick-draining cockpits(ISO 11812 : 2001)English version of DIN EN ISO 11812English versionICS 47.080Descriptors:Small craftWatertight cockpits and quick-draining cockpits(ISO 11812 : 2001) 2001. CEN All rights of exploitation i

6、n any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 11812 : 2001 EKleine Wasserfahrzeuge Wasser-dichte und schnell-lenzende Plichten(ISO 11812 : 2001)This European Standard was approved by CEN on 2001-11-12.CEN members are bound to comply with the CEN/CENELEC Inter

7、nal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The

8、European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the nation

9、al standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.EN ISO 11812December 2001Management Centre: rue de Stassart 36, B-1050 Bruss

10、elsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Petits navires Cockpits tanches etcockpits rapidement autovideurs(ISO 11812 : 2001)Page 2EN ISO 11812 : 2001ForewordInternational StandardISO 11812 : 2001 Small craft Watertight cockpits and quick-d

11、raining cockpits,which was prepared by ISO/TC 188 Small craft of the International Organization for Standardization, has beenadopted by CMC as a European Standard.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association,

12、and supports essential requirements of the relevant EU Directive. Forrelationship with this directive, see Annex ZA.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by J

13、une 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxemb

14、ourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 11812 : 2001 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 11812 : 2001255569101010111111111212121212121212131414

15、1414141515151515161618181818181819191919192020Page 4EN ISO 11812 : 2001212330343739Page 5EN ISO 11812 : 2001Page 6EN ISO 11812 : 2001Page 7EN ISO 11812 : 2001Page 8EN ISO 11812 : 2001Page 9EN ISO 11812 : 2001Page 10EN ISO 11812 : 2001Page 11EN ISO 11812 : 2001Page 12EN ISO 11812 : 2001Page 13EN ISO

16、11812 : 2001Page 14EN ISO 11812 : 2001Page 15EN ISO 11812 : 2001Page 16EN ISO 11812 : 2001Page 17EN ISO 11812 : 2001Page 18EN ISO 11812 : 2001Page 19EN ISO 11812 : 2001Page 20EN ISO 11812 : 2001Page 21EN ISO 11812 : 2001Page 22EN ISO 11812 : 2001Page 23EN ISO 11812 : 2001Page 24EN ISO 11812 : 2001Page 25EN ISO 11812 : 2001Page 26EN ISO 11812 : 2001Page 27EN ISO 11812 : 2001Page 28EN ISO 11812 : 2001