DIN EN ISO 11431-2003 Building construction - Jointing products - Determination of adhesion cohesion properties of saelants after exposure to heat water and artificial light throug.pdf

《DIN EN ISO 11431-2003 Building construction - Jointing products - Determination of adhesion cohesion properties of saelants after exposure to heat water and artificial light throug.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11431-2003 Building construction - Jointing products - Determination of adhesion cohesion properties of saelants after exposure to heat water and artificial light throug.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 91.100.50Hochbau Fugendichtstoffe Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen nachEinwirkung von Wrme, Wasser und knstlichem Licht durch Glas (ISO 11431 : 2002)European Standard EN ISO 11431 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forew

2、ordThis standard has been published in accordance with a decision taken by CEN/CMC to adopt, withoutalteration, International Standard ISO 11431 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building andCivil Engineering Standards Co

3、mmittee), Technical Committee 02.16.00 Fugendichtstoffe.Ref. No. DIN EN ISO 11431 : 2003-01English price group 06 Sales No. 110604.03DEUTSCHE NORM January 2003EN ISO 11431Continued overleaf.EN comprises 7 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches

4、Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Building constructionJointing productsDetermination of adhesion/cohesion properties of sealants afterexposure to heat, water and artificial light through glas

5、s(ISO 11431 : 2002)English version of DIN EN ISO 11431English versionICS 91.100.50Descriptors:Building constructionJointing productsDetermination of adhesion/cohesion properties of sealants afterexposure to heat, water and artificial light through glass(ISO 11431 : 2002) 2002. CEN All rights of expl

6、oitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 11431 : 2002 EHochbau Fugendichtstoffe Bestimmung des Haft- und Dehn-verhaltens von Dichtstoffen nachEinwirkung von Wrme, Wasserund knstlichem Licht durch Glas(ISO 11431 : 2002)This European Standard was

7、 approved by CEN on 2002-07-11.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national st

8、and-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the

9、 Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden,Switzerland, and

10、 the United Kingdom.EN ISO 11431August 2002Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Construction immobilire Produitspour joints Dtermination desproprits dadhsivit/cohsion desmastics aprs e

11、xposition la chaleur, leau et la lumire artificielle travers le verre (ISO 11431 : 2002)Page 2EN ISO 11431 : 2002ForewordInternational StandardISO 11431 : 2002 Building construction Jointing products Determination of adhesion/cohesion propertiesof sealants after exposure to heat, water and artificia

12、l light through glass,which was prepared by ISO/TC 59 Building construction of the International Organization for Standardization,has been adopted by CEN/CMC as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identical textor b

13、y endorsement, and conflicting national standards withdrawn, by February 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denm

14、ark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 11431 : 2002 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 11431 : 2002Page 4EN ISO 11431 : 2002Page 5EN ISO 11431 : 2002Page 6EN ISO 11431 : 2002Page 7EN ISO 11431 : 2002