DIN EN ISO 1127-1997 Stainless steel tubes - Dimensions tolerances and conventional masses per unit length (ISO 1127 1992) German version EN ISO 1127 1996《不锈钢管 尺寸、公差和单位长度的标准质量》.pdf

《DIN EN ISO 1127-1997 Stainless steel tubes - Dimensions tolerances and conventional masses per unit length (ISO 1127 1992) German version EN ISO 1127 1996《不锈钢管 尺寸、公差和单位长度的标准质量》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 1127-1997 Stainless steel tubes - Dimensions tolerances and conventional masses per unit length (ISO 1127 1992) German version EN ISO 1127 1996《不锈钢管 尺寸、公差和单位长度的标准质量》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM March 1997 DIN Stainless steel tubes Dimensions, tolerances and coventional masses per unit length (IS0 1 127 : 1992) English version of DIN EN IS0 1127 EN IS0 1127 ICs 23.040.10 Descriptors: Steel, pipes, dimensions. Nichtrostende Stahlrohre - Mae, Grenzabmae und Ingenbezogene Masse (

2、IS0 1 127 : 1992) Supersedes DIN 2462-1 and DIN 2463-1, March 1981 editions, and May 1996 edition. European Standard EN IS0 1127: 1996 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been published in accordance with a decision taken by EC

3、ISS/TC 29 to adopt, without alteration, International Standard IS0 1127 as a European Standard. The responsible German body involved in its preparation was the Normenausschu Eisen und Stahl (Steel and Iron Standards Committee). Amendments In comparison with DIN 2462-1 and DIN 2463-1, March 1981 edit

4、ions, the following amendments have been made. a) The specifications for seamless and welded pipes have been combined. b) Tolerances on the pipe length are no longer specified. c) Tolerances on the outside diameter and wall thickness have been changed. d) An outside diameter of 12,7 mm has been incl

5、uded. In comparison with DIN EN IS0 1127, May 1986 edition, a printing error in the German version has been corrected (i.e. no amendment has been made to the English version). Previous editions DIN 2462-1: 1969-03, 1981-03; DIN2463-1: 1969-03, 1981-03; DIN EN IS0 1127: 1996-05. EN comprises 8 pages.

6、 O No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut fur Normung e.V., Berlin. Beuth Verlag GmbH, Berlin, has the exclusive right of sale for German Standards (DIN-Normen). DIN EN IS0 1127: 1997-03 Sales No. 7 7 O8 i 0.97 English price group O8 EUROPEA

7、N STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS0 1127 April 1996 ICs 23.040.10 Descriptors: Steel, pipes, dimensions. English version Stainless steel tubes Dimensions, tolerances and coventional masses per unit length (IS0 11 27 : 1992) Tubes en acier inoxydable - Dimensions, tolrances et masses li

8、niques conventionelles (IS0 1127:1992) (IS0 1127:1992) Nichtrostende Stahlrohre - Mae, Grenz- abmae und Ingenbezogene Masse This European Standard was approved by CEN on 1996-02-16 and is identical to the IS0 Standard as referred to. CEN members are bound to comply with the CENKENELEC Internal Regul

9、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The Eur

10、opean Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a GEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the nat

11、ional standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Por- tugal, Spain, Sweden, Switzerland, and the United Kingdom. GEN European Committee for Standardization Comit Europen de Normalisation Europisches Komit

12、ee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels O 1996. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN IS0 1127: 1996 E Page 2 EN IS0 1127:1996 T5 Foreword International Standard IS0 1127: 1992 Stainless s

13、teel tubes - Dimensions, tolerances and coventional masses per unit length, which was prepared by ISO/TC 5 Ferrous metal pipes and metallic fittings of the International Organization for Standardi- zation, has been adopted by Technical Committee ECISS/TC 29 Steel tubes and fittings for steel tubes a

14、s a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by October 1996 at the latest. In accordance with the CENKENELEC Internal Regulations, the follo

15、wing countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. *5% with 0,l rnm min. Endorsement notice The text of the

16、International Standard IS0 1127: 1992 was approved by CEN as a European Standard without any modifica- tion. 1 Scope This International Standard specifies the diameters, thicknesses, tolerances and conventional masses per unit length of stainless steel tubes. 4.1 Tolerances on outside diameter See t

17、able I. Table 1 - Tolerances on outside diameter 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the edition indicated was valid. All standards are subject to r

18、evision, and parties to agreements based on this International Standard are encour- aged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and IS0 maintain registers of cur- rently valid International Standards. IS0 5252:1991, Steel tu

19、bes - Tolerance systems. 3 Dimensions The outside diameters and thicknesses of the tubes specified in this International Standard have been selected from IS0 4200. If thicknesses greater than 14,2 mm are needed, they should be chosen from IS0 4200. 4 Tolerances The tolerances permitted on the outsid

20、e diameter and thickness of the tubes result from the method of manufacture, the steel types and the heat treat- ment. The tolerances shall be selected from the values given in tables 1 and 2. I I Tolerance on outside diameter Tolerance I class f 1,5 % with f 0,75 rnrn min. with 0,5 mm min. I D I I

21、f 0,75 Yo with f 0,3 mrn min. I I 0,5 Yo with f 0,l rnm min lhe tolerances on outside diameter include ovality. 4.2 Tolerances on thickness See table 2 Table 2 - Tolerances on thickness Tderance class I Tolerance on thickness I T1 I 15 /A with f 0,6 rnrn min I T7 I 12,s Yo with f 0,4 mrn min. I T3 I

22、 f 10 Yo with f 0,2 rnm min. I I 5 7,s % with i 0,15 mrn min. The tolerances on thickness include eccentricity. Page 3 EN IS0 1127:1996 4.3 Other tolerances For tolerances on dimensions other than outside di- ameter and thickness, reference shall be made to IS0 5252. masses given in IS0 4200 multipl

23、ied by a factor of 1,015. This factor assumes an average density for these tubes of 7,97 kg/dm3. The conventional masses per unit length given in table 4 for ferritic and martensitic stainless steel 5 Conventional masses per unit length tubes are the masses given in IS0 42O multiplied by a factor of

24、 0,985. This factor assumes an average The conventional masses per unit length given in table3 for austenitic stainless steel tubes are the for these tubes Of 7,73 kg/dm3. - Page 4 EN IS0 1127:1996 Table 3 - Conventional masses for austenitic stainless steel tubes -I- -+ o o m x n m N- N N z N m I D v I ! Page 8 EN IS0 1127:1996 Annex A (informative) Bibliography l IS0 4200:1991, Plain end steel tubes, welded and seamless - General fables of dimensions and masses per unit length.