DIN EN ISO 11111-4-2016 Textile machinery - Safety requirements - Part 4 Yarn processing cordage and rope manufacturing machinery (ISO 11111-4 2005 + Amd 1 2009 + Amd 2 2016) Germa.pdf

《DIN EN ISO 11111-4-2016 Textile machinery - Safety requirements - Part 4 Yarn processing cordage and rope manufacturing machinery (ISO 11111-4 2005 + Amd 1 2009 + Amd 2 2016) Germa.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11111-4-2016 Textile machinery - Safety requirements - Part 4 Yarn processing cordage and rope manufacturing machinery (ISO 11111-4 2005 + Amd 1 2009 + Amd 2 2016) Germa.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、December 2016 English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.120.99!%J“2596139www.din.deD

2、IN EN ISO 11111-4Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 111114:2005 + Amd 1:2009 + Amd 2:2016);English version EN ISO 111114:2005 + A1:2009 + A2:2016,English translation of DIN EN ISO 11111-4:2016-12Textilmaschinen Sicherheitsanfo

3、rderungen Teil 4: Garnverarbeitungs, Seilereiwaren und Seilereimaschinen (ISO 111114:2005 + Amd 1:2009 + Amd 2:2016);Englische Fassung EN ISO 111114:2005 + A1:2009 + A2:2016,Englische bersetzung von DIN EN ISO 11111-4:2016-12Matriel pour lindustrie textile Exigences de scurit Partie 4: Machines de t

4、ransformation du fil et machines de production de cordages et darticles de corderie (ISO 111114:2005 + Amd 1:2009 + Amd 2:2016);Version anglaise EN ISO 111114:2005 + A1:2009 + A2:2016,Traduction anglaise de DIN EN ISO 11111-4:2016-12SupersedesDIN EN ISO 111114:200912See start of applicationwww.beuth

5、.deDocument comprises 30 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN ISO 11111-4:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. Fo

6、r DIN EN ISO 11111-4:2009-12 there is a transition period ending on 2016-12-31. National foreword This standard includes safety requirements. This document (EN ISO 11111-4:2016) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories”, Subcommittee SC 8 “Safety requirem

7、ents for textile machinery” (Secretariat: DIN, Germany) in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” (Secretariat: SNV, Switzerland). The responsible German body involved in its preparation was DIN-Normenausschuss Textil und Textilmaschinen (Textilnorm) (D

8、IN Standards Committee Textiles and Textile Machinery (Textilnorm), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen Sicherheitsanforderungen, Lrmminderung, Bildzeichen. This document includes Amendment 1:2009, approved by CEN on 2009-07-03, and A

9、mendment 2:2016, approved by CEN on 2016-05-05. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and # $. DIN EN ISO 11111 consists of the following parts, under the general title Textile machinery Safety requirements: Part 1: Common requirements Pa

10、rt 2: Spinning preparatory and spinning machines Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery This standard contains specif

11、ications giving detail to the essential safety and health requirements for design and construction of machines set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this st

12、andard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). DIN EN ISO 11111-4:2016-12 3 The DIN Standards cor

13、responding to the International Standards referred to in this document are as follows: ISO 9902-1 DIN EN ISO 9902-1 ISO 9902-4 DIN EN ISO 9902-4 ISO 11111-1:2016 DIN EN ISO 11111-1:2016-11 ISO 11111-2:2005 (as amended by ISO 11111-2:2005/Amd.1:2009 and ISO 11111-2:2005/Amd.2:2016) DIN EN ISO 11111-2

14、:2016-11 ISO 12100 DIN EN ISO 12100 ISO 13849-1:2006*)DIN EN ISO 13849-1:2016-06 ISO 13854 DIN EN 349*)ISO 13856-2 DIN EN ISO 13856-2 ISO 13856-3 DIN EN ISO 13856-3 ISO 13857 DIN EN ISO 13857 ISO 14119:2013 DIN EN ISO 14119:2014-03 ISO 23771 DIN EN ISO 23771 IEC 62061:2005*)DIN EN 62061:2016-05 Amen

15、dments This standard differs from DIN EN ISO 11111-4:2009-12 as follows: a) normative references have been updated; b) a reference to type C standards ISO 9902-1, ISO 9902-4 and ISO 23771 has been added in the scope; c) Clause 5 “Significant hazards and corresponding safety requirements and/or measu

16、res” has been modified; d) the informative Annex ZA has been updated. *) International Standard ISO 13849-1:2006 referenced in ISO 11111-4:2005/Amd.1:2009 has been replaced by ISO 13849-1:2015. *) DIN EN 349 is expected to be replaced by DIN EN ISO 13854 in 2017. *) International Standard IEC 62061:

17、2005 referenced in ISO 11111-4:2005/Amd.1:2009 has been replaced by IEC 62061:2005 + A1:2012 + A2:2015. DIN EN ISO 11111-4:2016-12 4 Previous editions DIN EN ISO 11111: 1995-10 DIN EN ISO 11111-4: 2005-06, 2009-12 National Annex NA (informative) Bibliography DIN EN 349, Safety of machinery Minimum g

18、aps to avoid crushing of parts of the human body DIN EN 62061:2016-05 (VDE 0113-50), Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005 + A1:2012 + A2:2015) DIN EN ISO 9902-1, Textile machinery Noise test code Pa

19、rt 1: Common requirements DIN EN ISO 9902-4, Textile machinery Noise test code Part 4: Yarn processing, cordage and rope manufacturing machinery DIN EN ISO 11111-1:2016-11, Textile machinery Safety requirements Part 1: Common requirements (ISO 11111-1:2016) DIN EN ISO 11111-2:2016-11, Textile machin

20、ery Safety requirements Part 2: Spinning preparatory and spinning machines (as amended by ISO 11111-2:2005/Amd.1:2009 and ISO 11111-2:2005/ Amd.2:2016) DIN EN ISO 12100, Safety of machinery General principles for design Risk assessment and risk reduction DIN EN ISO 13849-1:2016-06, Safety of machine

21、ry Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2015) DIN EN ISO 13856-2, Safety of machinery Pressure-sensitive protective devices Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars DIN EN ISO 13856

22、-2, Safety of machinery Pressure-sensitive protective devices Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices DIN EN ISO 13857, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs DIN E

23、N ISO 14119:2014-03, Safety of machinery Interlocking devices associated with guards Principles for design and selection (ISO 14119:2013) DIN EN ISO 23771, Textile machinery Guide to the design of textile machinery for reduction of the noise emissions EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR

24、M EN ISO 11111-4 February 2005 + A1 July 2009 + A2 June 2016 ICS 59.120.99 Supersedes EN ISO 11111:1995English Version Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005 + Amd 1:2009 + Amd 2:2016) Matriel pour lindustrie textile

25、Exigences de scurit Partie 4: Machines de transformation du fil et machines de production de cordages et darticles de corderie (ISO 11111-4:2005 + Amd 1:2009 + Amd 2:2016) Textilmaschinen Sicherheitsanforderungen Teil 4: Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen (ISO 11111-4:2005 + Am

26、d 1:2009 + Amd 2:2016) EN ISO 11111-4:2005 was approved by CEN on 2005-01-21, Amendment A1:2009 on 2009-07-03 and Amendment A2 on 2016-05-05. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat

27、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ve

28、rsion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus,

29、 Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom

30、. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11111-

31、4:2005 + A1:2009+ A2:2016 EEN ISO 11111-4:2005 + A1:2009 + A2:2016 (E) 2 Contents Page Foreword to EN ISO 11111-4:2005 . 3 Foreword to EN ISO 11111-4:2005/A1:2009 5 European foreword to EN ISO 11111-4:2005/A2:2016 . 6 Introduction 7 1 Scope 8 2 Normative references 8 3 Terms and definitions . 9 4 Li

32、st of significant hazards 9 5 Significant hazards and corresponding safety requirements and/or measures . 9 5.1 General 9 5.2 Doubling, twisting, texturing machines 9 5.3 Reeling and winding machines . 11 5.4 Ball winding machines . 12 5.5 Cordage and rope manufacturing machines 14 5.5.1 Common requ

33、irements of cordage and rope manufacturing machines 14 5.5.2 Safety requirements and/or measures for certain machine elements common to several cordage and rope manufacturing machines . 15 5.5.3 Goods machines or spreaders . 17 5.5.4 Draw frames and finishers 18 5.5.5 Stranding machines . 18 5.5.6 L

34、aying (closing) machines 19 5.5.7 Combined stranding and closing machines 20 5.5.8 Strand-plaited rope-making machines 20 5.6 Braiding machines . 20 6 Verification of safety requirements and/or measures . 23 7 Information concerning machine use . 23 Annex ZA (informative) #Relationship between this

35、European Standard and the essential requirements of EU Directive 2006/42/EC aimed to be covered . 24 Annex ZB (informative) !Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC 25 Bibliography . 26 DIN EN ISO 11111-4:2016-12 EN ISO 11111-4:2005

36、+ A1:2009 + A2:2016 (E) 3 Foreword to EN ISO 11111-4:2005 This document (EN ISO 11111-4:2005) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and ma

37、chinery for dry-cleaning and industrial laundry”, the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting national standards shall be

38、withdrawn at the latest by August 2005. This document supersedes EN ISO 11111:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Direct

39、ive(s), see informative Annex ZB, which is an integral part of this document. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. This first edition of I

40、SO 11111-4, together with ISO 11111-1, ISO 11111-2, ISO 11111-3, ISO 11111-5, ISO 11111-6 and ISO 11111-7, cancels and replaces ISO 11111:1995, which has been technically revised. ISO 11111 consists of the following parts, under the general title Textile machinery Safety requirements: Part 1: Common

41、 requirements Part 2: Spinning preparatory and spinning machines Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Preparatory machinery to weaving and knitting Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery Annexes ZA

42、 and ZB were added by CEN/CENELEC. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

43、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN ISO 11111-4:2016-12 EN ISO 11111-4:2005 + A1:2009 + A2:2016 (E) 4 Endorsement notice The text of ISO 11111-4:2005 has been ap

44、proved by CEN as EN ISO 11111-4:2005 without any modifications. NOTE Normative references to International Standards are listed in Annex ZA (normative). DIN EN ISO 11111-4:2016-12 EN ISO 11111-4:2005 + A1:2009 + A2:2016 (E) 5 Foreword to EN ISO 11111-4:2005/A1:2009 This document (EN ISO 11111-4:2005

45、/A1:2009) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories”, the secretariat of which is held by SNV. This Amendment to the European Standard 11111-4:2005 shall be given the

46、status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the

47、 subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Direct

48、ives. For relationship with EC Directives, see informative Annex ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, B

49、ulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11111-4:2005/Amd 1:2009 has