DIN EN ISO 11111-1-2016 Textile machinery - Safety requirements - Part 1 Common requirements (ISO 11111-1 2016) German version EN ISO 11111-1 2016《纺织机械 安全要求 第1部分 通用要求(ISO 11111-1-2.pdf
《DIN EN ISO 11111-1-2016 Textile machinery - Safety requirements - Part 1 Common requirements (ISO 11111-1 2016) German version EN ISO 11111-1 2016《纺织机械 安全要求 第1部分 通用要求(ISO 11111-1-2.pdf》由会员分享,可在线阅读,更多相关《DIN EN ISO 11111-1-2016 Textile machinery - Safety requirements - Part 1 Common requirements (ISO 11111-1 2016) German version EN ISO 11111-1 2016《纺织机械 安全要求 第1部分 通用要求(ISO 11111-1-2.pdf(87页珍藏版)》请在麦多课文档分享上搜索。
1、December 2016 English price group 31No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.120.01!%h;“2596924www.din.de
2、DIN EN ISO 11111-1Textile machinery Safety requirements Part 1: Common requirements (ISO 111111:2016);English version EN ISO 111111:2016,English translation of DIN EN ISO 11111-1:2016-12Textilmaschinen Sicherheitsanforderungen Teil 1: Gemeinsame Anforderungen (ISO 111111:2016);Englische Fassung EN I
3、SO 111111:2016,Englische bersetzung von DIN EN ISO 11111-1:2016-12Matriel pour lindustrie textile Exigences de scurit Partie 1: Exigences communes (ISO 111111:2016);Version anglaise EN ISO 111111:2016,Traduction anglaise de DIN EN ISO 11111-1:2016-12SupersedesDIN EN ISO 111111:200912 andDIN EN ISO 1
4、11111Corrigendum 1:201210See start of applicationwww.beuth.deDocument comprises 87 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN ISO 11111-1:2016-12 2 A comma is used as the decimal marker. Start of application T
5、he start of application of this standard is 2016-12-01. For DIN EN ISO 11111-1:2009-12 there is a transition period ending on 2017-04-30. National foreword This standard includes safety requirements. This document (EN ISO 11111-1:2016) has been prepared by Technical Committee ISO/TC 72 “Textile mach
6、inery and accessories”, Subcommittee SC 8 “Safety requirements for textile machinery” (Secretariat: DIN, Germany) in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” (Secretariat: SNV, Switzerland). The responsible German body involved in its preparation was DIN-
7、Normenausschuss Textil und Textilmaschinen (Textilnorm) (DIN Standards Committee Textiles and Textile Machinery (Textilnorm), Working Committee NA 106-02-01 AA Gemeinschaftsarbeitsausschuss BG Textil/Textilnorm: Textilmaschinen Sicherheitsanforderungen, Lrmminderung, Bildzeichen. DIN EN ISO 11111 co
8、nsists of the following parts, under the general title Textile machinery Safety requirements: Part 1: Common requirements Part 2: Spinning preparatory and spinning machines Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting prepa
9、ratory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery This standard contains specifications giving detail to the essential safety and health requirements for design and construction of machines set out in Annex I of the “Machinery Directive”, Directive 2006/4
10、2/EC. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with t
11、he requirements of the Machinery Directive (“presumption of conformity”). DIN EN ISO 11111-1:2016-12 3 The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 3691-1 DIN EN ISO 3691-1 ISO 4413:2010 DIN EN ISO 4413:2011-04 ISO 5232 DIN ISO 5232
12、ISO 9902 (all parts) DIN EN ISO 9902 (all parts) ISO 10218-1:2011 DIN EN ISO 10218-1:2012-01 ISO 10218-2 DIN EN ISO 10218-2 ISO 11111-2 DIN EN ISO 11111-2:2016-11 ISO 11111-3 DIN EN ISO 11111-3:2016-11 ISO 11111-4 DIN EN ISO 11111-4:2016-11 ISO 11111-5 DIN EN ISO 11111-5:2016-11 ISO 11111-6 DIN EN I
13、SO 11111-6:2016-11 ISO 11111-7 DIN EN ISO 11111-7:2016-11 ISO 11161:2007+Amd 1:2010*)DIN EN ISO 11161:2010-10 ISO 12100:2010 DIN EN ISO 12100:2011-03 ISO 13849-1:2015*)DIN EN ISO 13849-1:2016-03 ISO 13849-2:2012 DIN EN ISO 13849-2:2013-02 ISO 13850 DIN EN ISO 13850 ISO 13851:2002 DIN EN 574:1997-02
14、ISO 13854 DIN EN 349 ISO 13855:2010 DIN EN ISO 13855:2010-10 ISO 13856-1 DIN EN ISO 13856-1 ISO 13856-2 DIN EN ISO 13856-2 ISO 13856-3 DIN EN ISO 13856-3 ISO 13857:2008 DIN EN ISO 13857:2008-06 ISO 14118:2008*)DIN EN 1037:2008-11 ISO 14119:2013 DIN EN ISO 14119:2014-03 ISO/TR 14121-2 DIN ISO/TR 1412
15、1-2 ISO 14122-1 DIN EN ISO 14122-1 ISO 14122-2 DIN EN ISO 14122-2 ISO 14122-3 DIN EN ISO 14122-3 ISO 14122-4 DIN EN ISO 14122-4 ISO 14123-1:2015*)DIN EN ISO 14123-1:2016-03 *)International Standard ISO 11161:2007, referenced in ISO 11111-1:2016, has been replaced by ISO 11161:2007 + Amd 1:2010. *) I
16、nternational Standard ISO 13849-1:2006, referenced in ISO 11111-1:2016, has been replaced by 13849-1:2015. *)International Standard ISO 14118:2000, referenced in ISO 11111-1:2016, has been replaced by ISO 14118:2008. *)International Standard ISO 14123-1:1998, referenced in ISO 11111-1:2016, has been
17、 replaced by ISO 14123-1:2015. DIN EN ISO 11111-1:2016-12 4 ISO 14123-2 DIN EN 621:1994-11 ISO 23771 DIN EN ISO 23771 IEC 60204-1:2005 DIN EN 60204-1:2007-06 (VDE 0113 Part 1) IEC 60447:2004 DIN EN 60447:2004-12 (VDE 0196) IEC 61310-1:2007 DIN EN 61310-1:2008-09 (VDE 0113 Part 101) IEC 61496-1:2012
18、DIN EN 61496-1:2014-05 (VDE 0113 Part 201) IEC 61496-2 DIN EN 61496-2 (VDE 0113 Part 202) IEC 61496-3 DIN CLC/TS 61496-3 (VDE 0113 Part 203) IEC 62061:2005+A1:2012+A2:2015 DIN EN 62061-2016-05 (VDE 0113 Part 50) Amendments This standard differs from DIN EN ISO 11111-1:2009-12 and DIN EN ISO 11111-1
19、Corrigendum 1:2012-10 as follows: a) normative references have been updated; b) references to clauses of ISO 12100 have been revised; c) since EN 999 has been replaced by EN ISO 13855, Subclause 6.18 “Batching devices” has been revised to include methods of calculating minimum distances for reaching
20、 over and circumventing electro-sensitive protective equipment and for access to the danger point behind the electro-sensitive protective equipment; d) where AOPDs with several single beams are used to prevent entering a dangerous area, provision of three beams at heights of 300 mm, 700 mm and 1 100
21、 mm is now required (see A.2). Previous editions DIN EN ISO 11111: 1995-10 DIN EN ISO 11111-1: 2005-06, 2009-12 DIN EN ISO 11111-1 Corrigendum 1: 2012-10 DIN EN ISO 11111-1:2016-12 5 National Annex NA (informative) Bibliography DIN EN 349, Safety of machinery Minimum gaps to avoid crushing of parts
22、of the human body DIN EN 574:1997-02, Safety of machinery Two-hand control devices Functional aspects Principles for design DIN EN 1037:2008-11, Safety of machinery Prevention of unexpected start-up DIN EN 60204-1:2007-06 (VDE 0113 Part 1), Safety of machinery Electrical equipment of machines Part 1
23、: General requirements (IEC 60204-1:2005, modified) DIN EN 60447:2004-12 (VDE 0196), Basic and safety principles for man-machine interface, marking and identification Actuating principles (IEC 60447:2004) DIN EN 61310-1:2008-09 (VDE 01131 Part 101), Safety of machinery Indication, marking and actuat
24、ion Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007) DIN EN 61496-1:2014-05 (VDE 0113 Part 201), Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2012) DIN EN 61496-2 (VDE 0113 Part 202), Safety of machiner
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DINENISO1111112016TEXTILEMACHINERYSAFETYREQUIREMENTSPART1COMMONREQUIREMENTSISO1111112016GERMANVERSIONENISO1111112016

链接地址:http://www.mydoc123.com/p-678748.html