DIN EN ISO 11011-2015 Compressed air - Energy efficiency - Assessment (ISO 11011 2013) German version EN ISO 11011 2015《压缩空气 能源效率 评定 (ISO 11011-2013) 德文版本EN ISO 11011-2015》.pdf

《DIN EN ISO 11011-2015 Compressed air - Energy efficiency - Assessment (ISO 11011 2013) German version EN ISO 11011 2015《压缩空气 能源效率 评定 (ISO 11011-2013) 德文版本EN ISO 11011-2015》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 11011-2015 Compressed air - Energy efficiency - Assessment (ISO 11011 2013) German version EN ISO 11011 2015《压缩空气 能源效率 评定 (ISO 11011-2013) 德文版本EN ISO 11011-2015》.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、August 2015 Translation by DIN-Sprachendienst.English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、 23.140!%EB“2342931www.din.deDDIN EN ISO 11011Compressed air Energy efficiency Assessment (ISO 11011:2013);English version EN ISO 11011:2015,English translation of DIN EN ISO 11011:2015-08Druckluft Energieeffizienz Bewertung (ISO 11011:2013);Englische Fassung EN ISO 11011:2015,Englische bersetzung v

3、on DIN EN ISO 11011:2015-08Air comprim Efficacit nergtique valuation (ISO 11011:2013);Version anglaise EN ISO 11011:2015,Traduction anglaise de DIN EN ISO 11011:2015-08www.beuth.deDocument comprises 58 pagesIn case of doubt, the German-language original shall be considered authoritative.07.15 DIN EN

4、 ISO 11011:2015-08 2 A comma is used as the decimal marker. National foreword This document (EN ISO 11011:2015) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment” in collaboration with Technical Committee CEN/TC 232 “Compressors, vacuum pump

5、s and their systems” (Secretariat: SIS, Sweden). The responsible German body involved in its preparation was the DIN-Normenausschuss Maschinenbau (DIN Standards Committee Mechanical Engineering), Working Committee NA 060-08-16 AA Luftkompressoren of Section Kompressoren und Drucklufttechnik. Represe

6、ntatives of manufacturers and users of compressed air systems, and of the employers liability insurance associations contributed to this standard. The International Standards referred to in this document and taken over as European Standards have been published as the corresponding DIN EN ISO Standar

7、ds with the same number. Where the International Standards and publications referred to are not also DIN ISO Standards with the same number, there are no national standards available. National Annex NA (informative) Bibliography VDMA Einheitsblatt 4370:2012, Energy efficient compressed air systems G

8、uideline for identification and evaluation of existing weakness and the correct coverage of potential energy savings EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11011 March 2015 ICS 23.140 English Version Compressed air - Energy efficiency - Assessment(ISO 11011:2013) Air comprim - Effi

9、cacit nergtique - valuation(ISO 11011:2013) Druckluft - Energieeffizienz - Bewertung(ISO 11011:2013)This European Standard was approved by CEN on 19 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

10、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fr

11、ench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgari

12、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke

13、y and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Re

14、f. No. EN ISO 11011:2015 EContents PageForeword 4Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 63.1 General . 73.2 Flow 83.3 Pressure 93.4 Storage 103.5 Volume . 104 Roles and responsibilities . 114.1 Identification of assessment team members . 114.2 Site management supp

15、ort 124.3 Communications . 124.4 Access to equipment, resources, and information 124.5 Assessment objectives and scope 124.6 Identification of other assessment team members 124.7 Objective check 125 Assessment methodology. 135.1 General 135.2 Systems engineering methods 135.3 Systems engineering pro

16、cess 135.4 System assessment process 146 Parameters and their determination .156.1 General 156.2 Measurement . 156.3 Pressure . 156.4 Flow rate 166.5 Power . 177 Initial data collection and evaluation 187.1 General 187.2 Plant background . 187.3 Plant function 187.4 Compressed air system definition

17、. 187.5 Inventory of key end-use air demands 187.6 Heat recovery 187.7 Baseline period and duration of data logging .197.8 Energy use 197.9 Compressed air system supply efficiency . 197.10 System volume . 197.11 Pressure . 207.12 Flowrate . 207.13 Critical air demands 207.14 Compressed air waste 207

18、.15 Air treatment . 207.16 Compressor control .217.17 Storage 217.18 Maintenance .217.19 Ambient intake conditions .218 Analysis of data from assessment 218.1 General 21DIN EN ISO 11011:2015-08 EN ISO 11011:2015 (E) 2 8.2 Baseline profiles . 228.3 System volume . 248.4 Pressure profile . 248.5 Perce

19、ived high-pressure demand 268.6 Demand profile 278.7 Critical air demands 288.8 Compressed air waste 298.9 Optimized air treatment 308.10 Reduced system operating pressure .318.11 Balance of supply and demand 328.12 Maintenance opportunities . 328.13 Heat recovery opportunities 339 Reporting and doc

20、umentation of assessment findings .339.1 Assessment report 339.2 Confidentiality 349.3 Energy-saving opportunities . 349.4 Data for third-party review . 34Annex A (informative) Introduction to energy assessment .35Annex B (informative) Assessment activities General .37Annex C (informative) Assessmen

21、t activities Supply 42Annex D (informative) Assessment activities Transmission .48Annex E (informative) Assessment activities Demand 52Annex F (informative) Competencies 55Bibliography .56DIN EN ISO 11011:2015-08 EN ISO 11011:2015 (E) 3 Foreword The text of ISO 11011:2013 has been prepared by Techni

22、cal Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11011:2015 by Technical Committee CEN/TC 232 “Compressors, vacuum pumps and their systems” the secretariat of which is held

23、 by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibilit

24、y that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bou

25、nd to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga

26、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11011:2013 has been approved by CEN as EN ISO 11011:2015 without any modification. DIN EN ISO 11011:2015-08 EN ISO 11011:2015 (E) 4 IntroductionThis International Standard ha

27、s been developed with reference to available documentation1)(see Bibliography) relating to energy assessment of compressed air systems.This International Standard is produced to support the objectives of energy management for those organisations utilizing compressed air and wishing to improve the en

28、ergy efficiency of such systems. Remembering the words of Lord Kelvin who said in 1883, “If you cannot measure it, you cannot improve it”, this International Standard aims to assist with measurement and provide the knowledge to enable improvement.The prime consideration for any compressed air system

29、 is the ability to generate air with the least amount of energy. Having done this, the next consideration is to transmit energy from the point of generation to the point of use with the least loss. The final consideration is to eliminate waste and use the least amount of air for the production proce

30、ss.This International Standard uses speciality terms which relate the needs of assessment activities to those of compressed air systems. Many terms will appear new to the users of this International Standard who are familiar with general compressed air terms.A general introduction to energy assessme

31、nt is given in Annex A.1) Extracts from ASME EA-4-2010 were used with permission from ASME. The core elements used are from Scope and Introduction, Organizing the Assessment, Analysis of Data From the Assessment, Reporting and Documentation, and Mandatory Appendices I, Preliminary Data Collection Ma

32、trix.DIN EN ISO 11011:2015-08 EN ISO 11011:2015 (E) 5 WARNING Users of this International Standard are advised that energy-related judgements should not compromise safety issues.1 ScopeThis International Standard sets requirements for conducting and reporting the results of a compressed air system a

33、ssessment (hereafter referenced as an “assessment”) that considers the entire system, from energy inputs to the work performed as the result of these inputs.This International Standard considers compressed air systems as three functional subsystems: supply which includes the conversion of primary en

34、ergy resource to compressed air energy; transmission which includes movement of compressed air energy from where it is generated to where it is used; demand which includes the total of all compressed air consumers, including productive end-use applications and various forms of compressed air waste.T

35、his International Standard sets requirements for analysing the data from the assessment, reporting and documentation of assessment findings, and identification of an estimate of energy saving resulting from the assessment process.This International Standard identifies the roles and responsibilities

36、of those involved in the assessment activity.This International Standard provides indicative information in Annexes B, C, D, and E of the type of data to be collected to assist in a successful assessment. The information provided is not exhaustive and therefore is not intended to restrict the inclus

37、ion of other data. The form and presentation of the information given in the annexes is also not intended to restrict the manner of presentation of the reporting to the client.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indi

38、spensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1217, Displacement compressors Acceptance testsISO 5598, Fluid power systems and components Vocabulary3 Te

39、rms and definitionsFor the purposes of this document, the terms and definitions given in ISO 1217 and ISO 5598 and the following apply.DIN EN ISO 11011:2015-08 EN ISO 11011:2015 (E) 6 3.1 General3.1.1air treatmentany process provided for the purpose of separation and purification of the compressed a

40、ir3.1.2artificial demandexcess air consumed by a systems unregulated or poorly regulated uses due to operating at a pressure in excess of actual requirements3.1.3assessment teamauthority to fulfil roles and responsibility of the assessment having appropriate functions and knowledge3.1.4baselineset o

41、f typical operating period, work conditions, and performance parameters revealed by assessment and used for comparison of efficiency of measures recommended as a result of energy efficiency assessment procedures3.1.5compressed air point of usecomponents using the pneumatic energy for physical or che

42、mical actions3.1.6compressed air systemsgroup of subsystems comprising integrated sets of components, including air compressors, treatment equipment, controls, piping, pneumatic tools, pneumatically powered machinery, and process applications utilizing compressed air3.1.7compressed air system assess

43、mentactivity which considers all components and functions, from energy inputs (SUPPLY SIDE) to the work performed (DEMAND SIDE) as the result of these inputs; undertaken to observe, measure, and document energy reduction and performance improvement opportunities in a compressed air system3.1.8data l

44、oggingmeasurement of physical parameters while tabulating a periodic log (record) of their numerical value using time-aligned data frames for the plurality of recorded parametersNote 1 to entry: Two types of data logging are:a) dynamics: data logging while creating a sufficiently high frequency peri

45、odic log (record) so as to investigate the time-based variation of measured physical parametersb) trending: data logging during an extended duration of time for the purpose of investigating regularities, irregularities, or both in the measured physical parameters throughout time3.1.9demandtotal of a

46、ll compressed air consumers, including productive end-use applications and various forms of compressed air waste3.1.10drawdowncircumstance observed in a compressed air system that is characterized by continual pressure decay arising from a compressed air system event whereby air demand exceeds the c

47、apacity of supplyDIN EN ISO 11011:2015-08 EN ISO 11011:2015 (E) 7 3.1.11operating periodgroup of typical time periods that share similar compressed air energy and compressed air demand profilesNote 1 to entry: See 3.1.15.3.1.12spot check measurementmeasurement of physical parameters creating a log (record) of their numerical value that is carried o