DIN EN ISO 10675-1-2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 Steel nickel titanium and their alloys (ISO 10675-1 2016) German vers.pdf

《DIN EN ISO 10675-1-2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 Steel nickel titanium and their alloys (ISO 10675-1 2016) German vers.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 10675-1-2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 Steel nickel titanium and their alloys (ISO 10675-1 2016) German vers.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、April 2017 English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.40!%dTy“2654986www.din.deDI

2、N EN ISO 10675-1Nondestructive testing of welds Acceptance levels for radiographic testing Part 1: Steel, nickel, titanium and their alloys (ISO 106751:2016);English version EN ISO 106751:2016,English translation of DIN EN ISO 10675-1:2017-04Zerstrungsfreie Prfung von Schweiverbindungen Zulssigkeits

3、grenzen fr die Durchstrahlungsprfung Teil 1: Stahl, Nickel, Titan und deren Legierungen (ISO 106751:2016);Englische Fassung EN ISO 106751:2016,Englische bersetzung von DIN EN ISO 10675-1:2017-04Essais non destructifs des assemblages souds Niveaux dacceptation pour valuation par radiographie Partie 1

4、: Acier, nickel, titane et leurs alliages (ISO 106751:2016);Version anglaise EN ISO 106751:2016,Traduction anglaise de DIN EN ISO 10675-1:2017-04SupersedesDIN EN ISO 106751:201312www.beuth.deDocument comprises 18 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original

5、shall be considered authoritative.04.17 DIN EN ISO 10675-1:2017-04 2 A comma is used as the decimal marker. National foreword This document (EN ISO 10675-1:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “We

6、lding and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-08-22 AA “Industrial radiation methods”. The DIN Standards corresponding to th

7、e International Standards referred to in this document are as follows: ISO 5817 DIN EN ISO 5817 ISO 6520-1 DIN EN ISO 6520-1 ISO 17635 DIN EN ISO 17635 ISO 17636-1 DIN EN ISO 17636-1 ISO 17636-2 DIN EN ISO 17636-2 ISO 17637 DIN EN ISO 17637 Amendments This standard differs from DIN EN ISO 10675-1:20

8、13-12 as follows: a) the standard has been brought into line with the state of the art; b) normative references have been updated and editorial changes made. Previous editions DIN EN 12517-1: 1998-03, 2003-01, 2006-06 DIN EN ISO 106751-1: 2013-12 DIN EN ISO 10675-1:2017-04 3 National Annex NA (infor

9、mative) Bibliography DIN EN ISO 5817, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections DIN EN ISO 6520-1, Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion weldi

10、ng DIN EN ISO 17635, Non-destructive testing of welds General rules for metallic materials DIN EN ISO 17636-1, Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film DIN EN ISO 17636-2, Non-destructive testing of welds Radiographic testing Part 2: X- and

11、gamma-ray techniques with digital detectors DIN EN ISO 17637, Non-destructive testing of welds Visual testing of fusion-welded joints DIN EN ISO 10675-1:2017-04 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10675-1 December 2016 ICS 25.160.40 Supersedes

12、EN ISO 10675-1:2013English Version Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016) Essais non destructifs des assemblages souds - Niveaux dacceptation pour valuation par radiographie - Partie 1: Acier

13、, nickel, titane et leurs alliages (ISO 10675-1:2016) Zerstrungsfreie Prfung von Schweiverbindungen - Zulssigkeitsgrenzen fr die Durchstrahlungsprfung -Teil 1: Stahl, Nickel, Titan und deren Legierungen(ISO 10675-1:2016) This European Standard was approved by CEN on 14 December 2016. CEN members are

14、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t

15、he CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cen

16、tre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

17、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-100

18、0 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10675-1:2016 EEuropean foreword .31 Scope . 52 Normative references 53 Terms and definitions . 54 Radiographic technique 65 Acceptance levels . 6Annex A (informati

19、ve) Guide to the limitations of radiographic testing . 9Annex B (informative) Examples for determination of area percentage (%) of imperfections 10Annex C (informative) Calculation of the sum of acceptable areas 12Bibliography .14Contents PageDIN EN ISO 10675-1:2017-04 EN ISO 10675-1:2016 (E) 2Forew

20、ord .4European foreword This document (EN ISO 10675-1:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be g

21、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be

22、the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10675-1:2013. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to

23、implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Rom

24、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10675-1:2016 has been approved by CEN as EN ISO 10675-1:2016 without any modification. DIN EN ISO 10675-1:2017-04 EN ISO 10675-1:2016 (E) 3 ForewordISO (the International Organizat

25、ion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established h

26、as the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The

27、procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the edi

28、torial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rig

29、hts identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an expl

30、anation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee resp

31、onsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 5, Testing and inspection of welds.This second edition cancels and replaces the first edition (ISO 10675-1:2008), which has been technically revised.Requests for official interpretations of any aspect of this docum

32、ent should be directed to the Secretariat of ISO/TC 44/SC 5 via your national standards body. A complete listing of these bodies can be found at www.iso.org.A list of all parts in the ISO 10675 series can be found on the ISO website.DIN EN ISO 10675-1:2017-04 EN ISO 10675-1:2016 (E) 4 1 ScopeThis do

33、cument specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds or materials.The acceptance levels can be related to welding stand

34、ards, application standards, specifications or codes. This document assumes that the radiographic testing has been carried out in accordance with ISO 17636-1 and ISO 17636-2.When assessing whether a weld meets the requirements specified for a weld quality level, the sizes of imperfections permitted

35、by standards are compared with the dimensions of indications revealed by a radiograph made of the weld.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the e

36、dition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5817, Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfectionsISO 6520-1, Welding and allied pro

37、cesses Classification of geometric imperfections in metallic materials Part 1: Fusion weldingISO 17636-1, Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with filmISO 17636-2, Non-destructive testing of welds Radiographic testing Part 2: X- and gamma-ray tec

38、hniques with digital detectorsISO 17637, Non-destructive testing of welds Visual testing of fusion-welded joints3 Terms and definitionsNo terms and definitions are listed in this document.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electro

39、pedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obpDIN EN ISO 10675-1:2017-04 EN ISO 10675-1:2016 (E) 5 4 Radiographic techniqueWelded joints shall be visually tested and evaluated in accordance with ISO 17637 before radiographic testing.D

40、epending on the weld quality level, radiographic technique A or B in accordance with ISO 17636-1 or ISO 17636-2 shall be used, as shown in Table 1.Table 1 Radiographic testingQuality levels in accordance with ISO 5817Testing techniques and classes in accordance with ISO 17636-1 and ISO 17636-2Accept

41、ance levels in accordance with this documentB B 1C Ba2D A 3aHowever, the minimum number of exposure for circumferential weld testing may correspond to the requirements of class A of ISO 17636-1 or ISO 17636-2.When quantification of undercut and/or excessive penetration by radiographic testing is req

42、uired, specific procedures using test exposures may be applied in order to establish a basis for approximate quantification in accordance with the requirements of ISO 5817. This shall be specified in the adopted specification/procedure.5 Acceptance levelsThe acceptance levels of this document are ba

43、sically valid for evaluation of imperfections which cannot be detected and evaluated by visual testing. Surface imperfections (such as undercut and excessive penetration, surface damage, weld spatter, etc.) which, due to object geometry, cannot be evaluated, but where the interpreter suspects the IS

44、O 5817 quality levels are not fulfilled, shall be subject to more specific testing.The acceptance levels for indications are shown in Table 2 and Table 3. The types of imperfections are selected from ISO 5817 and defined in ISO 6520-1.The symbols used in Table 2 and Table 3 are the following: l leng

45、th of indication, in millimetres; s nominal butt weld thickness, in millimetres; t base material thickness, in millimetres; L any 100 mm testing length; wpwidth of the weld, in millimetres; h width of indication, the width or height of surface imperfection, in millimetres; d diameter of pore, in mil

46、limetres; dAdiameter of pore envelope area;DIN EN ISO 10675-1:2017-04 EN ISO 10675-1:2016 (E) 6 b width of excess penetration of weld, in millimetres; A sum of projected areas of indications related to each L wp, in % (see Annex B); l summary length of imperfections within L, in millimetres (indicat

47、ions shall not be divided into different ranges L).Table 2 Acceptance levels for internal indications in butt weldsNo.Type of internal imperfections in accordance with ISO 6520-1Acceptance level 3aAcceptance level 2aAcceptance level 11 Cracks (100) Not permitted Not permitted Not permitted2a Porosit

48、y and gas pores (2012, 2011) Single layerA 2,5 % d 0,4s, max. 5 mm L = 100 mmA 1,5 % d 0,3s, max. 4 mm L = 100 mmA 1 % d 0,2s, max. 3 mm L = 100 mm2b Porosity and gas pores (2012, 2011) MultilayerA 5 % d 0,4s, max. 5 mm L = 100 mmA 3 % d 0,3s, max. 4 mm L = 100 mmA 2 % d 0,2s, max. 3 mm L = 100 mm3bClustered (localized) porosity (2013)dA wp, max. 25 mm L = 100 mmd