DIN EN ISO 10595-2012 Resilient floor coverings - Semi-flexible vinylcomposition(VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595 2010) German version EN ISO 10595 .pdf

《DIN EN ISO 10595-2012 Resilient floor coverings - Semi-flexible vinylcomposition(VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595 2010) German version EN ISO 10595 .pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 10595-2012 Resilient floor coverings - Semi-flexible vinylcomposition(VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595 2010) German version EN ISO 10595 .pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、 One or more corrigenda exist with corrections to this document. These can be searched online and ordered free of charge at www.beuth.de April 2012 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut f

2、r Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.150!$C:“1883223www.din.deDDIN EN ISO 10595Resilient floor coverings Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles Specification (ISO 1059

3、5:2010)English translation of DIN EN ISO 10595:2012-04Elastische Bodenbelge Halbflexible PVC-Bodenplatten Spezifikation (ISO 10595:2010)Englische bersetzung von DIN EN ISO 10595:2012-04Revtements de sol rsilients Carreaux semi-flexibles/vinyle (VCT) en poly(chlorure de vinyle) Spcifications (ISO 105

4、95:2010)Traduction anglaise de DIN EN ISO 10595:2012-04www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.1203.12 DIN EN ISO 10595:2012-04 2 A comma is used as the decimal marker. National foreword This standard has been prepared by T

5、echnical Committee ISO/TC 219 “Floor coverings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10595:2012 by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, (Secretariat: BSI, United Kingdom). The responsible German bod

6、y involved in its preparation was the Normenausschuss Kunststoffe (Plastics Standards Committee), Working Committee NA 054-04-05 AA Bodenbelge. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 10874 DIN EN ISO 10874 ISO 23999 DIN EN ISO

7、23999 ISO 24340 DIN EN ISO 24340 ISO 24342 DIN EN ISO 24342 ISO 24344 DIN EN ISO 24344 ISO 24346 DIN EN ISO 24346 National Annex NA (informative) Bibliography DIN EN ISO 10874, Resilient, textile and laminate floor coverings Classification DIN EN ISO 23999, Resilient floor coverings Determination of

8、 dimensional stability and curling after exposure to heat DIN EN ISO 24340, Resilient floor coverings Determination of thickness of layers DIN EN ISO 24342, Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles DIN EN ISO 24344, Resilient floor

9、 coverings Determination of flexibility and deflection DIN EN ISO 24346, Resilient floor coverings Determination of overall thickness EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10595 February 2012 ICS 97.150 English Version Resilient floor coverings - Semi-flexible/vinylcomposition (VC

10、T) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010) Revtements de sol rsilients - Carreaux semi-flexibles/vinyle (VCT) en poly(chlorure de vinyle) - Spcifications (ISO 10595:2010) Elastische Bodenbelge - Halbflexible PVC-Bodenplatten -Spezifikation (ISO 10595:2010) This European Sta

11、ndard was approved by CEN on 31 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni

12、ng such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into i

13、ts own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

14、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marn

15、ix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10595:2012: EEN ISO 10595:2012 (E) DIN EN ISO 10595:2012-04 2 Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Requireme

16、nts .5 4.1 Identification requirements .5 4.2 General requirements 5 5 Classification 6 6 Marking .8 Annex A (informative) Optional properties .9 Bibliography 10 EN ISO 10595:2012 (E) Foreword The text of ISO 10595:2010 has been prepared by Technical Committee ISO/TC 219 “Floor coverings” of the Int

17、ernational Organization for Standardization (ISO) and has been taken over as EN ISO 10595:2012 by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either

18、by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CE

19、NELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu

20、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10595:20

21、10 has been approved by CEN as a EN ISO 10595:2012 without any modification. DIN EN ISO 10595:2012-04 3 1 Scope This International Standard specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may

22、contain a transparent, non-PVC factory finish. To encourage the consumer to make an informed choice, this International Standard includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requir

23、ements for marking. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 10

24、874, Resilient, textile and laminate floor coverings Classification ISO 24340, Resilient floor coverings Determination of thickness of layers ISO 24342, Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles ISO 24343-3, Resilient and laminate f

25、loor coverings Determination of indentation and residual indentation Part 3: Resilient semi-flexible/vinyl composition tiles: Indentation ISO 24344:2008, Resilient floor coverings Determination of flexibility and deflection ISO 24346, Resilient floor coverings Determination of overall thickness ISO

26、23999, Resilient floor coverings Determination of dimensional stability and curling after exposure to heat ASTM F1265, Standard Test Method for Resistance to Impact for Resilient Floor Tile 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 poly

27、(vinyl chloride) floor coverings floor covering produced using poly(vinyl chloride) as a binder DIN EN ISO 10595:2012-04 EN ISO 10595:2012 (E) 4 3.2 semi-flexible floor tiles rigid tiles made from poly(vinyl chloride) which can only be deflected under specified conditions 3.3 vinyl composition tile

28、resilient floor covering composed of a poly(vinyl chloride) binder, filler and pigments NOTE The binder shall consist of one or more resins of poly(vinyl chloride) and/or copolymers of vinyl chloride compounded with suitable plasticizers and stabilizers. Other suitable polymeric resins may be incorp

29、orated as part of the binder. 3.4 solid-colour tile tile with a uniform single colour throughout its entire thickness 3.5 through-pattern tile tile where either the pattern and colours on the surface of the tile extend entirely through the thickness of the tile without significant change, or the col

30、ours appearing on the surface extend throughout the entire thickness of the tile, although the appearance of the pattern created by these colours will change throughout the thickness 3.6 surface-pattern tile tile where the decoration or pattern need not extend throughout the entire thickness NOTE Th

31、e combination of pattern and wear surface must exceed 0,1 mm or as otherwise specified in Table 3. 3.7 factory finish transparent coating applied during the manufacture 4 Requirements 4.1 Identification requirements Floor tiles described in this International Standard shall be non-asbestos formulate

32、d and identified by construction as shown in Table 1. Table 1 Identification by construction Type Construction I Solid colour II Through pattern III Surface pattern 4.2 General requirements Floor tiles described in this International Standard shall conform to the appropriate general requirements spe

33、cified in Table 2 when tested in accordance with the methods given therein. DIN EN ISO 10595:2012-04 EN ISO 10595:2012 (E) 5 Table 2 General requirements Characteristic/Property Requirement Test method Overall thickness mm Nominal value 0,13 ISO 24346 Tiles: side length mm squareness and straightnes

34、s mm for side length u 305 mm 305 mm Deviation u 0,13 % of nominal length up to 0,4 mm maximum Deviation allowed at any point u 0,25 u 0,35 ISO 24342 Dimensional stability after exposure to heat % u 0,20 ISO 23999 Impact u 2,5 mm thick 4 drops from 250 mm 2,5 mm thick 4 drops from 500 mm No cracks b

35、eyond limit ASTM F1265 Flexibility mm W 25 ISO 24344:2008, Method B Indentation resistance mm Indentation, IRat 25 C 0,25 C 0,15 IRu 0,40 ISO 24343-3 5 Classification The classification scheme for resilient floor coverings is described in ISO 10874. The requirements for use of semi-flexible/vinyl co

36、mposition poly(vinyl chloride) floor tile in accordance with this scheme are specified in Table 3. DIN EN ISO 10595:2012-04 EN ISO 10595:2012 (E) 6 Table 3 Classification requirement for level of use Overall thickness Thickness of wear layer Class Symbol Intensity of use Minimum nominal value, mm Mi

37、nimum nominal value, mm All types Applies to Type III onlyDomestic 21 Moderate/Light 1,5 0,1 22 General/Medium 2,0 0,1 22+ General 2,0 0,1 23 Heavy 2,0 0,25 Commercial 31 Moderate 2,0 0,25 32 General 2,5 0,5 33 Heavy 3,0 0,5 34 Very heavy 3,0 0,5 Light industrial 41 Moderate 3,00,542 General 3,0 Not

38、 available 43 Heavy 3,0 Not available Test method ISO 24346 ISO 24340 DIN EN ISO 10595:2012-04 EN ISO 10595:2012 (E) 7 6 Marking Floor coverings covered by this International Standard and/or their packaging shall bear the following marking: a) number and date of this International Standard, i.e. ISO

39、 10595:2010; b) manufacturers or suppliers identification; c) product name; d) colour/pattern and batch number; e) classes/symbols appropriate for the product; f) the dimensions of a tile and the area, in square metres, contained in the package. DIN EN ISO 10595:2012-04 EN ISO 10595:2012 (E) 8 Annex

40、 A (informative) Optional properties Where the following properties are required for specific applications, the floor covering should be tested in accordance with the appropriate methods: electrical resistance (ASTM F150, EN 1081, ANSI/ESD S7.1, ANSI/ESD STM 97.1); electrical propensity (EN 1815, AN

41、SI/ESD STM 97.2 ); effects of stains (ASTM F925, EN 423, ISO 26987:2008); reaction to fire; determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010, ASTM E648); reaction to fire; ignitability when subject to direct impingement of flame (ISO 11925-2:2010); reaction to fire

42、, specific optical density of smoke generated (ASTM E662); resistance to heat (ASTM F1514); resistance to light (ASTM F1515, ISO 105-BO2:1994, Method 3). DIN EN ISO 10595:2012-04 EN ISO 10595:2012 (E) 9 Bibliography 1 ISO 9239-1:2010, Reaction to fire tests for floorings Part 1: Determination of the

43、 burning behaviour using a radiant heat source 2 ISO 11925-2:2010, Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test 3 ISO 105-BO2:1994, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc

44、 fading lamp test (including Amendment 1:1998) 4 ISO 26987:2008, Resilient floor coverings Determination of staining and resistance to chemicals 5 ANSI/ESD S7.1, Resistive Characterization of Materials Floor Materials 6 ANSI/ESD STM 97.1, Floor Materials and Footwear Resistance Measurement in Combin

45、ation with a Person 7 ANSI/ESD STM 97.2, Floor Materials and Footwear Voltage Measurement in Combination with a Person 8 ASTM F150, Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring 9 ASTM F925, Standard Test Method for Resistance to Chemicals of

46、Resilient Flooring 10 ASTM E648, Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source 11 ASTM E662, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials 12 ASTM F1066, Standard Specification for Vinyl Compositi

47、on Floor Tile 13 ASTM F1514, Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change 14 ASTM F1515, Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change 15 ASTM F1914, Standard Test Methods for Short-Term Indentation and Residual In

48、dentation of Resilient Floor Covering 16 EN 423, Resilient floor coverings Determination of the effect of stains 17 EN 654, Resilient floor coverings Semi-flexible polyvinyl chloride tiles Specification 18 EN 1081, Resilient floor coverings Determination of the electrical resistance 19 EN 1815, Resilient and textile floor coverings Assessment of static electrical propensity 20 JIS A 1454, Test Methods Resilient Floorcove