DIN EN ISO 105-C12-2006 Textiles - Tests for colour fastness - Part C12 Colour fastness to industrial laundering (ISO 105-C12 2004) English version of DIN EN ISO 105-C12 2006-04《纺织.pdf

《DIN EN ISO 105-C12-2006 Textiles - Tests for colour fastness - Part C12 Colour fastness to industrial laundering (ISO 105-C12 2004) English version of DIN EN ISO 105-C12 2006-04《纺织.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 105-C12-2006 Textiles - Tests for colour fastness - Part C12 Colour fastness to industrial laundering (ISO 105-C12 2004) English version of DIN EN ISO 105-C12 2006-04《纺织.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、 DEUTSCHE NORMApril 2006DIN EN ISO 105-C12 ICS 59.080.01 Textiles Tests for colour fastness Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004) English version of DIN EN ISO 105-C12:2006-04 Textilien Farbechtheitsprfungen Teil C12: Farbechtheit gegen industrielle Wsche (ISO 105-C12

2、:2004) Englische Fassung DIN EN ISO 105-C12:2006-04 Document comprises 11 pages No part of this standard may be reproduced without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-

3、Normen). English price group 8 www.din.de www.beuth.de !,nh=“11.06 9756926DIN EN ISO 105-C12:2006-04 2 National foreword This standard has been published in accordance with a decision taken by CEN/TC 248 to adopt, without alteration, International Standard ISO 105-C12 as a European Standard. The res

4、ponsible German body involved in its preparation was the Normenausschuss Materialprfung (Ma-terials Testing Standards Committee), Technical Committee NMP 511 Farbechtheit von Textilien Deutsche Echtheitskommission DEK. The DIN Standards corresponding to the International Standards referred to in cla

5、use 2 of the EN are as follows: ISO 105-A01 DIN EN ISO 105-A01 ISO 105-A02 DIN EN 20105-A02 ISO 105-A03 DIN EN 20105-A03 ISO 105-A04 DIN EN ISO 105-A04 ISO 105-A05 DIN EN ISO 105-A05 ISO 139 DIN EN ISO 139 National Annex NA (informative) Bibliography DIN EN 20105-A02, Tests for colour fastness of te

6、xtiles Part A02: Grey scale for assessing change in colour DIN EN 20105-A03, Tests for colour fastness of textiles Part A03: Grey scale for assessing staining DIN EN ISO 105-A01, Tests for colour fastness of textiles Part A01: General principles of testing DIN EN ISO 105-A04, Textiles Tests for colo

7、ur fastness Part A04: Method for the instrumental as-sessment of the degree of staining of adjacent fabrics DIN EN ISO 105-A05, Textiles Tests for colour fastness Part A05: Method for the instrumental as-sessment of the change in colour to a test specimen DIN EN ISO 139, Textiles Standard atmosphere

8、s for conditioning and testing EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 105-C12February 2006ICS 97.060; 59.080.01English VersionTextiles - Tests for colour fastness - Part C12: Colour fastnessto industrial laundering (ISO 105-C12:2004)Textiles - Essais de solidit des teintures - Partie

9、C12:Solidit des teintures au lavage industriel (ISO 105-C12:2004)Textilien - Farbechtheitsprfungen - Teil C12: Farbechtheitgegen industrielle Wsche (ISO 105-C12:2004)This European Standard was approved by CEN on 16 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulation

10、s which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European S

11、tandard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national stan

12、dards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPE

13、AN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 105-C12:2006: E2 Foreword The

14、 text of ISO 105-C12:2004 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 105-C12:2006 by Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of which is held by BS

15、I. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at the latest by August 2006. According to the CEN/CENELEC Internal Regulation

16、s, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

17、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 105-C12:2004 has been approved by CEN as EN ISO 105-C12:2006 without any modifications. Introduction The test method in this part of ISO 105 is intended to reflect the ef

18、fect of comprehensive laundering during industrial laundry procedures, as distinct from the domestic washing test methods as given in ISO 105-C05, ISO 105-C06 and ISO 105-C08. Four test conditions are described, one at (92 2)C intended for the evaluation of workwear and three, as given below, at (75

19、 2) C, for the evaluation of bed and table linen and corporate wear: without the addition of peroxy bleach compounds; with the addition of hydrogen peroxide (for the bleaching of white work with coloured trimmings); with the addition of sodium perborate tetrahydrate and tetra-acetylethylene diamine

20、(TAED) (for the bleaching of white work with coloured trimmings). NOTE The addition of TAED/perborate is a conveniently stable way of producing peracetic acid in situ. This method of test does not reflect the effect of optical brightening agents. This method and the single cycle test methods describ

21、ed in ISO 105-C06 and ISO 105-C08 may not reproduce the effect of coloured fabrics treated with certain dye fixing agents and finishes after multiple (5 to 10) industrial washes. EN ISO 105-C12:2006 (E)3 1 Scope This part of ISO 105 specifies methods for determining the resistance of the colour of t

22、extiles of all kinds exposed to all forms of industrial laundering procedures. One cycle approximates to the colour loss and cross staining resulting from chemical and/or mechanical action achieved after multiple (5 to 10) industrial launderings. 2 Normative references The following referenced docum

23、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A01:1994, Textiles Tests for colour fastness Part A01: General principl

24、es of testing ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour ISO 105-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining ISO 105-A04, Textiles Tests for colour fastness Part A04: Method for the instrumental assessme

25、nt of the degree of staining of adjacent fabrics ISO 105-A05, Textiles Tests for colour fastness Part A05: Instrumental assessment of change in colour for determination of grey scale rating ISO 105-F02, Textiles Tests for colour fastness Part F02: Specification for cotton and viscose adjacent fabric

26、s ISO 105-F04, Textiles Tests for colour fastness Part F04: Specification for polyester adjacent fabric ISO 105-F10:1989, Textiles Tests for colour fastness Part F10: Specification for reference adjacent fabric: Multifibre ISO 139, Textiles Standard atmospheres for conditioning and testing 3 Princip

27、le A specimen of the textile in contact with specified adjacent fabrics is laundered, rinsed and dried. Specimens are laundered under appropriate conditions of temperature, alkalinity, bleaching and mechanical action such that the result is obtained in a conveniently short time. The mechanical actio

28、n is accomplished by the use of an appropriate number of steel balls. The change in colour of the specimens and the staining of the adjacent fabrics are assessed using the grey scale. EN ISO 105-C12:2006 (E)4 4 Reagents NOTE All chemicals should be of at least general purpose laboratory grade. 4.1 D

29、etergent, as specified in Annex A. 4.2 Solution, containing 0,2 g/l of glacial acetic acid, if required for souring treatment. 4.3 Hydrogen peroxide solution, 30 %. 4.4 Sodium hydroxide (NaOH) pellets. 4.5 Tetra-acetylethylenediamine (TAED). 4.6 Sodium perborate tetrahydrate. 4.7 Distilled water, gr

30、ade 3 water (see 8.2 of ISO 105-A01:1994) 5 Apparatus 5.1 Suitable mechanical device, consisting of a water bath containing a rotatable shaft which supports, radially, stainless steel containers (75 5) mm diameter (125 10) mm high of capacity (550 50) ml, the bottom of the containers being (45 10) m

31、m from the centre of the shaft. The shaft/container assembly is rotated at a frequency of (40 2) min1. The temperature of the water bath is thermostatically controlled to maintain the test solution at the prescribed temperature ( 2)C. NOTE Other mechanical devices may be used for this test, provided

32、 that the results are identical with those obtained by the apparatus described. 5.2 Mechanical stirrer, minimum (1 100 100) min1or equivalent, to ensure dispersion and prevent settling. 5.3 Steel balls, non-corrodible (stainless), approximately 6,0 mm in diameter. 5.4 Adjacent fabrics. 5.4.1 A multi

33、fibre adjacent fabric complying to type (TV) of ISO 105-F10:1989 or 5.4.2 Two single-fibre adjacent fabrics, one cotton and one polyester, in accordance with ISO 105-F02 and ISO 105-F04 or as otherwise specified between interested parties. 5.4.3 If required, a non-dyeable fabric (e.g. polypropylene)

34、 (e.g. to mechanically stabilize a knitwear specimen). 5.5 Grey scale, for assessing change in colour in accordance with ISO 105-A02, or instrumentally ISO 105-A05, and for assessing staining in accordance with ISO 105-A03, or instrumentally ISO 105-A04. 5.6 Flat-iron, of mass not exceeding 2,5 kg (

35、 100 g) and capable of giving the temperature indicated in 7.2.5, if a pressing treatment is required. Condition the sample for 24 h before assessing to allow for temporary colour change caused by heat. EN ISO 105-C12:2006 (E)5 6 Test specimens 6.1 Fabric specimen Cut two fabric test specimens each

36、80 mm 160 mm, one specimen in the warp direction and one specimen in the weft direction. In the case of knitwear prepare two specimens. Weigh the two specimens to two decimal places (grams). Fold each specimen across the narrow dimension in the centre of the specimen with fabric face on the outside

37、(see Figure 1). Using dimensionally stable thread, sew along the two sides to form a bag. Place 25 stainless steel balls inside each bag and seal by sewing. 6.2 Adjacent fabrics Either: a) cut a sample of multifibre TV adjacent fabric (5.4.1) and weigh to two decimal places (grams); or b) cut a samp

38、le 100 mm 80 mm, of the two single-fibre adjacent fabrics (5.4.2) and weigh to two decimal places (grams). NOTE The two-fabric test specimen and adjacent staining fabrics are not sewn to each other. This allows fabric abrasion to occur. Dimensions in millimetes Key 1 fold line 2 folded edge 3 folded

39、 specimen aSew along two open sides. Figure 1 Preparation of test specimens EN ISO 105-C12:2006 (E)6 7 Test procedures 7.1 Preparation of wash liquor 7.1.1 Tests without the addition of hydrogen peroxide Using the mixer (5.2), disperse 5 g/l of the industrial reference detergent (4.1) base powder (w

40、ithout optical brightener) in grade 3 water (4.7) at ambient temperature for (10 1) min. Add 1 g of sodium hydroxide (4.4) per litre of solution. Using glacial acetic acid (4.2), adjust the pH to be within the range 12,0 to 12,5 and use immediately. Proceed as in 7.2. 7.1.2 Tests with the addition o

41、f hydrogen peroxide Using the mixer (5.2), disperse 5 g/l of the industrial reference detergent (4.1) base powder (without optical brightener) in grade 3 water (4.7) at ambient temperature for (10 1) min. Add 1 g of sodium hydroxide (4.4) per litre of solution. Using glacial acetic acid (4.2), adjus

42、t the pH to be within the range 11,0 to 11,5. Add 2 ml of 30 % hydrogen peroxide (4.3) and use immediately. Proceed as in 7.2. 7.1.3 Tests with the addition of sodium perborate and tetra acetylethylenediamine (peracetic acid) Using the mixer (5.2), disperse 5 g/l of the industrial reference detergen

43、t (4.1) base powder (without optical brightener), 2 g of sodium perborate tetrahydrate (4.6) and 0,3 g TAED (4.5) (100 % activity) in grade 3 water (4.7) at ambient temperature for (10 1) min. Using sodium hydroxide (4.4), adjust the pH to be within the range 10,0 to 10,5 and use immediately. Procee

44、d as in 7.2. 7.2 Testing the specimens 7.2.1 To each container (see 5.1) add wash liquor at a ratio of 15:1 liquor:fabric (i.e., 15 ml of solution for each gram of combined specimen weight). Place both the prepared test specimens and the separate adjacent fabric in the container together with an add

45、itional 25 stainless steel balls (5.3). Close the containers, place them in the machine (5.1), commence rotation and raise the temperature at a rate of (1,5 0,5) C/min to the temperature specified in Table 1. Continue to run the test for a further 60 min at this temperature. Table 1 Test conditions

46、Test number Temperature pH Additions of bleaching agents 1 S 92 2 C 12,0 to 12,5 nil 2 S 75 2 C 12,0 to 12,5 nil 1 P 75 2 C 11,0 to11,5 2 ml/l of 30 % hydrogen peroxide 2 P 75 2 C 10,0 to 10,5 2 g/l sodium perborate tetrahydrate 0,3 g/l TAED NOTE During the test, pressure may develop within the cont

47、ainer. Containers should always be cooled and the pressure released before opening. EN ISO 105-C12:2006 (E)7 7.2.2 Remove the fabric test specimens and the adjacent fabric(s) at the end of the wash and rinse twice for 1 min in two separate 100 ml portions of grade 3 water (4.7), and then in cold, ru

48、nning tap water for 10 min. 7.2.3 Where the practice is to sour at the end of the washing operation, the following optional operation may be conducted. Treat the fabric test specimens in a 100 ml portion of acetic acid solution (4.2) for 1 min at 30 C then rinse each composite specimen in a 100 ml p

49、ortion of grade 3 water (4.7) for 1 min. 7.2.4 Extract excess water from the fabric test specimen by squeezing. 7.2.5 Open out the specimens for measurement, by cutting along the seams. Dry the specimens and adjacent fabrics by hanging in air at a temperature not exceeding 60 C. If required, press dry each specimen by pressing with a flat iron (5.6) at a temperature appropriate to the fabric under test, but in no case at a temperature above 150 C. Conditi