DIN EN ISO 105-C06-2010 Textiles - Tests for colour fastness - Part C06 Colour fastness to domestic and commercial laundering (ISO 105-C06 2010) German version EN ISO 105-C06 2010《.pdf

《DIN EN ISO 105-C06-2010 Textiles - Tests for colour fastness - Part C06 Colour fastness to domestic and commercial laundering (ISO 105-C06 2010) German version EN ISO 105-C06 2010《.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 105-C06-2010 Textiles - Tests for colour fastness - Part C06 Colour fastness to domestic and commercial laundering (ISO 105-C06 2010) German version EN ISO 105-C06 2010《.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、August 2010 Translation by DIN-Sprachendienst.English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、 59.080.01!$jP$“1714501www.din.deDDIN EN ISO 105-C06Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering(ISO 105-C06:2010)English translation of DIN EN ISO 105-C06:2010-08Textilien Farbechtheitsprfungen Teil C06: Farbechtheit bei der Haushaltswsche und d

3、er gewerblichen Wsche(ISO 105-C06:2010)Englische bersetzung von DIN EN ISO 105-C06:2010-08Textiles Essais de solidit des coloris Partie C06: Solidit des coloris aux lavages domestiques et industriels(ISO 105-C06:2010)Traduction anglaise de DIN EN ISO 105-C06:2010-08SupersedesDIN EN ISO 105-C06:1997-

4、05www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 16 pages08.10 DIN EN ISO 105-C06:2010-08 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 38 “Textiles” in collabo

5、ration with Technical Committee CEN/TC 248 “Textiles and textile products” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Materials Testing Standards Committee), Working Committee NA 062-05-11 AA Farbechtheit von Te

6、xtilien Deutsche Echtheitskommission DEK. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 105-A01 DIN EN ISO 105-A01 ISO 105-A02 DIN EN 20105-A02 ISO 105-A03 DIN EN 20105-A03 ISO 105-A04 DIN EN ISO 105-A04 ISO 105-A05 DIN EN ISO 105-A05

7、 ISO 105-J01 DIN EN ISO 105-J01 ISO 3696 DIN ISO 3696 Amendments This standard differs from DIN EN ISO 105-C06:1997-05 as follows: a) b) The composition of AATCC 1993 Standard Reference Detergent has been changed. Previous editions DIN 54017: 1984-01 DIN EN ISO 105-C06: 1997-05 ISO 105-J02 DIN EN IS

8、O 105-J02 ISO 105-C06:1994 Technical Corrigendum 1:2002 has been incorporated. DIN EN ISO 105-C06:2010-08 3 National Annex NA (informative) Bibliography DIN EN ISO 105-A01, Textiles Tests for colour fastness Part A01: General principles of testing DIN EN 20105-A02, Textiles Tests for colour fastness

9、 Part A02: Grey scale for assessing change in colour DIN EN 20105-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining DIN EN ISO 105-A04, Textiles Tests for colour fastness Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics

10、DIN EN ISO 105-A05, Textiles Tests for colour fastness Part A05: Instrumental assessment of change in colour for determination of grey scale DIN EN ISO 105-J01, Textiles Tests of colour fastness Part J01: General principles for measurement or surface colour DIN EN ISO 105-J03, Textiles Tests for col

11、our fastness Part J03: Calculation of colour differences DIN ISO 3696, Water for analytical laboratory use Specification and test methods DIN EN ISO 105-C06:2010-08 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-C06 March 2010 ICS 59.080.01 Supersedes

12、 EN ISO 105-C06:1997English Version Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) Textiles - Essais de solidit des coloris - Partie C06: Solidit des coloris aux lavages domestiques et industriels (ISO 105-C06:2010) Textilien

13、 - Farbechtheitsprfungen - Teil C06: Farbechtheit bei der Haushaltswsche und der gewerblichen Wsche (ISO 105-C06:2010) This European Standard was approved by CEN on 18 February 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving t

14、his European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official version

15、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, B

16、ulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE

17、FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 105-C06:2010: EContents DIN EN ISO 105-

18、C06:2010-08 EN ISO 105-C06:2010 (E) 2 Page Foreword3 1 Scope 4 2 Normative references 4 3 Principle5 4 Apparatus, materials and reagents5 5 Test specimen9 6 Test procedures.9 7 Test report 11 Bibliography 12 Foreword collaboration with Technical Committee CEN/TC 248 “Textiles and textile products”,

19、the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Atte

20、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 105-C06:1997. According to the CEN/CENELEC Internal Regula

21、tions, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt

22、a, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 105-C06:2010 has been approved by CEN as a EN ISO 105-C06:2010 without any modification. This document (EN ISO 105-C06:2010) has been prepared

23、by Technical Committee ISO/TC 38 “Textiles” in DIN EN ISO 105-C06:2010-08 EN ISO 105-C06:2010 (E) 3 1 Scope This part of ISO 105 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for

24、normal household articles using a reference detergent. Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects. The colour loss and staining resulting from desorption and/or abrasive action in one single (S) test closely approximate

25、s to one commercial or domestic laundering. The results of one multiple (M) test may in some cases be approximated by the results of up to five domestic or commercial launderings at temperatures not exceeding 70 C. The M tests are more severe than the S tests because of an increase in mechanical act

26、ion. These methods do not reflect the effect of optical brighteners present in commercial washing products. These methods are designed for the detergents and bleach systems given. Other detergents and bleach systems may require different conditions and levels of ingredients. 2 Normative references T

27、he following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A01, Textiles Tests for colour fastness Pa

28、rt A01: General principles of testing ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour ISO 105-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining ISO 105-A04, Textiles Tests for colour fastness Part A04: Method for t

29、he instrumental assessment of the degree of staining of adjacent fabrics ISO 105-A05, Textiles Tests for colour fastness Part A05: Instrumental assessment of change in colour for determination of grey scale rating ISO 105-F01, Textiles Tests for colour fastness Part F01: Specification for wool adjac

30、ent fabric ISO 105-F02, Textiles Tests for colour fastness Part F02: Specification for cotton and viscose adjacent fabrics ISO 105-F03, Textiles Tests for colour fastness Part F03: Specification for polyamide adjacent fabric ISO 105-F04, Textiles Tests for colour fastness Part F04: Specification for

31、 polyester adjacent fabric DIN EN ISO 105-C06:2010-08 EN ISO 105-C06:2010 (E) 4 ISO 105-F05, Textiles Tests for colour fastness Part F05: Specification for acrylic adjacent fabric ISO 105-F06, Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric ISO 105-F07, Textiles T

32、ests for colour fastness Part F07: Specification for secondary acetate adjacent fabric ISO 105-F10, Textiles Tests for colour fastness Part F10: Specification for adjacent fabric: Multifibre ISO 3696, Water for analytical laboratory use Specification and test methods 3 Principle A specimen of the te

33、xtile in contact with specified adjacent fabric or fabrics is laundered, rinsed and dried. Specimens are laundered under appropriate conditions of temperature, alkalinity, bleaching and abrasive action such that the result is obtained in a conveniently short time. The abrasive action is accomplished

34、 by the use of a low liquor ratio and an appropriate number of steel balls. The change in colour of the specimen and the staining of the adjacent fabric or fabrics are assessed by comparison with the grey scales or instrumentally. 4 Apparatus, materials and reagents 4.1 Suitable mechanical device, c

35、onsisting of a water bath containing a rotatable shaft which supports, radially, stainless steel containers with a diameter of (75 5) mm and a height of (125 10) mm, of capacity (550 50) ml, the bottom of the containers being (45 10) mm from the centre of the shaft. The shaft/container assembly is r

36、otated at a frequency of (40 2) min1. The temperature of the water bath is thermostatically controlled to maintain the test solution at the prescribed temperature 2 C. Other mechanical devices may be used for this test, provided that the results are identical to those obtained using the apparatus de

37、scribed. 4.2 Non-corrodible (stainless) steel balls, 6 mm in diameter. 4.3 Adjacent fabrics (see ISO 105-A01). Use either 4.3.1 or 4.3.2. NOTE Supplies of spun acetate may be limited due to decreased manufacturing. 4.3.1 A multifibre adjacent fabric, complying with ISO 105-F10, appropriate to the te

38、mperature used: a multifibre adjacent fabric DW1) containing wool and acetate (tests at 40 C and 50 C and in certain cases, to be indicated in the test report, also at 60 C); a multifibre adjacent fabric TV2) not containing wool and acetate (in certain tests at 60 C, and in all tests at 70 C and 95

39、C). Consideration should be made in the use of multifibre with wool as the combination of temperature and sodium perborate at 60 C might be harmful to the wool. 4.3.2 Two single-fibre adjacent fabrics, complying with the relevant ISO 105-F01 to F07 standards. One of the adjacent fabrics shall be mad

40、e of the same kind of fibre as that of the textile to be tested, or that predominating in the case of blends, and the second piece made of the fibre as indicated in Table 1 or, in the case of blends, of the kind of fibre second in order of predominance, or as otherwise specified. 1) DW = diacetate i

41、s the first yarn; wool is the second yarn. 2) TV = triacetate and viscose. DIN EN ISO 105-C06:2010-08 EN ISO 105-C06:2010 (E) 5 Table 1 Pairs of adjacent fabrics Second piece to be: If first piece is: For tests A and B For tests C, D and E Cotton Wool Viscose Wool Cotton Silk Cotton Viscose Wool Cot

42、ton Acetate Viscose Viscose Polyamide Wool or Cotton Cotton Polyester Wool or Cotton Cotton Acrylic Wool or Cotton Cotton 4.3.3 If required, a non-dyeable fabric (e.g. polypropylene). 4.4 Detergent, without optical brightener (WOB). 4.4.1 Detergent solution. A minimum volume of 1 litre of detergent

43、solution shall be prepared, because of possible lack of homogeneity of the detergent powder. Either of the detergents in 4.4.2 or 4.4.3 may be used. 4.4.2 AATCC3)1993 Standard Reference Detergent WOB. The detergent is low-sudsing; the surfactants composing the detergent are anionic, with a small pro

44、portion of non-ionic, and are biodegradable. Properties and composition are given in Table 2. 3) American Association of Textile Chemists and Colorists (AATCC), PO Box 12215, 1 Davis Drive, Research Triangle Park, North Carolina 27709 USA. Telephone: +1-919-549-8141; Fax: +1-919-549-8933; http:/www.

45、aatcc.org/. DIN EN ISO 105-C06:2010-08 EN ISO 105-C06:2010 (E) 6 Table 2 AATCC 1993 Standard Reference Detergent WOB Composition Mass fraction % Linear alkylbenzene sulfonate sodium salta18 Sodium aluminosilicate solids 25 Sodium carbonate 18 Sodium silicate solidsb0,50 Sodium sulfate 22,13 Polyethy

46、lene glycolc2,76 Sodium polyacrylate 3,50 Silicone, suds suppressor 0,04 Moisture 10 Miscellaneous (unreacted in surfactant stocks) 0,07 Total 100 aC11.8LAS, introduced as Stepans Calsoft L-50-12. bSiO2/Na2O = 1,6. c2 % introduced via base granulates and 0,76 % introduced via a suds suppressor admix

47、ture. 4.4.3 ECE4)Detergent with Phosphates. In countries where perborates are used in laundering, the ECE Reference Detergent for colour fastness testing, without optical brightener, may be used. The nominal composition of the ECE Detergent with Phosphates is given in Table 3. NOTE Information on th

48、e availability of this detergent can be obtained from national standards organizations. 4) European Colourfastness Establishment (ECE), Gartenstrasse 5, D-14169 Berlin, Germany. DIN EN ISO 105-C06:2010-08 EN ISO 105-C06:2010 (E) 7 Table 3 ECE Detergent with Phosphates Composition Mass fraction % Lin

49、ear sodium alkylbenzenesulfonate (mean length of alkane chain C11,5) 8,0 0,02 Ethoxylated tallow alcohol (14 EO) 2,9 0,02 Sodium soap, chain length C12 C16: 13 % to 26 % C18 C22: 74 % to 87 % 3,5 0,02 Sodium tripolyphosphate 43,7 0,02 Sodium silicate (SiO2:Na2O = 3,3:1) 7,5 0,02 Magnesium silicate 1,9 0,02 Carboxymethylcellulose (CMC) 1,2 0,02 Ethylenediaminetetraacetic acid (EDTA), sodium salt 0,2 0,02 Sodi