DIN EN ISO 10472-6-2009 Safety requirements for industrial laundry machinery - Part 6 Ironing and fusing presses (ISO 10472-6 1997) English version of DIN EN ISO 10472-6 2009-10《工业.pdf

《DIN EN ISO 10472-6-2009 Safety requirements for industrial laundry machinery - Part 6 Ironing and fusing presses (ISO 10472-6 1997) English version of DIN EN ISO 10472-6 2009-10《工业.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 10472-6-2009 Safety requirements for industrial laundry machinery - Part 6 Ironing and fusing presses (ISO 10472-6 1997) English version of DIN EN ISO 10472-6 2009-10《工业.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、October 2009DEUTSCHE NORM English price group 12No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.060!$Y#“1549900www.

2、din.deDDIN EN ISO 10472-6Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses (ISO 10472-6:1997)English version of DIN EN ISO 10472-6:2009-10Sicherheitsanforderungen fr industrielle Wschereimaschinen Teil 6: Bgel- und Fixierpressen (ISO 10472-6:1997)Englische Fassu

3、ng DIN EN ISO 10472-6:2009-10SupersedesDIN EN ISO 10472-6:1998-05See start of validitywww.beuth.deDocument comprises 22 pagesDIN EN ISO 10472-6:2009-10 2 Start of validity This standard takes effect on 1 October 2009. DIN EN ISO 10472-6:1998-05 may be used in parallel until 28 December 2009. Nationa

4、l foreword This standard includes safety requirements. This standard has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” (Secretariat:

5、SNV, Switzerland). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Technical Committee NA 060-26-12 AA Wschereimaschinen of Section Wscherei- und Chemischreinigungsmaschinen. Representatives of manufacturers a

6、nd users of textile machinery, industrial laundry and dry-cleaning machinery, of the employers liability insurance association Textil und Bekleidung and of the Working Group Wscherei contributed to this standard. Amendment of the European Machinery Directive has made it necessary to review the previ

7、ously valid standard, EN ISO 10472-6:1997-12, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 Dece

8、mber 2009) and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, and which apply to textile machinery, industrial laundry and dry-cleaning machinery that are either first placed on the market or commissioned within the EEA. This standard serves to facil

9、itate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Di

10、rective (“presumption of conformity”). correspond as follows: ISO 13852 DIN EN 294 ISO 14119 DIN EN 1088 Amendments This standard differs from DIN EN ISO 10472-6:1998-05 as follows: a) Annex ZA (normative) has been replaced by Annex ZA (informative) “Relationship between this European Standard and t

11、he Essential Requirements of EU Directive 98/37/EC”. b) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been updated. the corresponding DIN EN or DIN EN ISO Standards with the same number, except for those below, whic

12、h The International and European Standards referred to in clause 2 of this document have been published as DIN EN ISO 10472-6:2009-10 3 Previous editions DIN 11908: 1975-07 DIN VDE 0791 (VDE 0791-1): 1989-08 DIN EN ISO 10472-6: 1998-05 National Annex NA (informative) Bibliography DIN EN 294, Safety

13、of machinery Safety distances to prevent danger zones from being reached by the upper limbs DIN EN 1088, Safety of machinery Interlocking devices associated with guards Principles for design and selection DIN EN ISO 10472-6:2009-10 4 This page is intentionally blank EUROPEAN STANDARDNORME EUROPENNEE

14、UROPISCHE NORMEN ISO 10472-6November 2008ICS 97.060 Supersedes EN ISO 10472-6:1997 English VersionSafety requirements for industrial laundry machinery - Part 6:Ironing and fusing presses (ISO 10472-6:1997)Exigences de scurit pour les machines de blanchisserieindustrielle - Partie 6: Presses repasser

15、 et thermocoller(ISO 10472-6:1997)Sicherheitsanforderungen fr industrielleWschereimaschinen - Teil 6: Bgel- und Fixierpressen(ISO 10472-6:1997)This European Standard was approved by CEN on 23 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c

16、onditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in thr

17、ee official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Aus

18、tria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMIT

19、TEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10472-6:2008: EContents2 DIN EN ISO 10

20、472-6:2009-10 EN ISO 10472-6:2008 (E) Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Definitions .6 4 Hazards .7 5 Safety requirements and/or measures for the hazards identified in clause 4.8 5.1 General .8 5.2 Mechanical hazards.8 5.2.1 Closing and pressing of the head and buck

21、 of all presses 8 5.2.2 Operating mechanism of the head and buck of all presses 10 5.2.3 Falling of the head of scissor presses 10 5.3 Electrical hazards . 10 5.4 Thermal hazards 10 5.4.1 Hot surfaces of all presses, covered and uncovered . 10 5.4.2 Free steam affecting the operator (for scissor pre

22、sses) 11 5.4.3 Radiated and convected heat affecting the operator (for scissor presses) . 11 5.5 Hazards generated by noise . 11 5.6 Hazards caused by harmful fumes, for fusing presses 11 5.7 Hazards due to neglect of ergonomic principles in machine design of all presses . 11 5.7.1 Inappropriate pos

23、ture and effort. 11 5.7.2 Inadequate local lighting . 11 5.8 Failure of energy supply or control systems 11 6 Verification of safety requirements and/or measures. 11 7 Information concerning machine use. 16 7.1 Instruction handbook 16 7.2 Warning signs . 16 Annex ZA (informative) Relationship betwee

24、n this European Standard and the Essential Requirements of EU Directive 98/37/EC 17 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 18 ForewordThe text of ISO 10472-6:1997 has been prepared by Technical Committee ISO/TC 72

25、“Textile machinery and machinery for dry-cleaning and industrial laundering” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10472-6:2008 by Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This

26、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the el

27、ements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10472-6:1997. This document has been prepared under a mandate given to CEN by the European Commission and the E

28、uropean Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the foll

29、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

30、venia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10472-6:1997 has been approved by CEN as a EN ISO 10472-6:2008 without any modification. 3 DIN EN ISO 10472-6:2009-10EN ISO 10472-6:2008 (E) IntroductionThis part of ISO 10472 is intended to instruct the des

31、igner of industrial laundry machinery in a systematicmanner, focusing on his particular type of machine, regarding the relevant essential safety requirements,and to suggest possible state-of-the-art safety solutions.The extent to which hazards are covered is indicated in the scope of this part of IS

32、O 10472. In addition,machinery should comply as appropriate with ISO/TR 12100-1 and ISO/TR 12100-2 for hazards which are notspecifically referred to in this part of ISO 10472.All examples given in this part of ISO 10472 represent the state of the art. Equivalent solutions areacceptable, provided the

33、y attain at least the same safety level.The designer is presumed to have taken into account all the provisions of ISO 10472-1 before consideringthis part of ISO 10472.4 DIN EN ISO 10472-6:2009-10 EN ISO 10472-6:2008 (E) 1 ScopeThis part of ISO 10472 covers, together with ISO 10472-1, most significan

34、t hazards associated with ironingand fusing presses used in the laundry, garment and dry-cleaning industry, and in particular: scissor presses; cabinet presses; drawer presses; rotary presses (carousel) and other presses with multiple bucks.This part of ISO 10472 complements the basic requirements a

35、s laid down in ISO/TR 12100-1 andISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards(see EN 1050) and on selecting measures for attaining the required safety level.This part of ISO 10472 does not apply to ancillary equipment, e. g steam boilers,

36、steam valves and supplypipe work, vent systems, work feed systems and discharge systems, and ducting to the atmosphere.2 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions ofthis part of ISO 10472. At the time of publication, t

37、he editions indicated were valid. All standards are subjectto revision, and parties to agreement based on this part of ISO 10472 are encouraged to investigate thepossibility of applying the most recent editions of the standards indicated below. Members of IEC and ISOmaintain registers of currently v

38、alid International Standards.ISO 10472-1:1997, Safety requirements for industrial laundry machinery Part 1: Common requirements.ISO/TR 12100-1:1992, Safety of machinery Basic concepts, general principles for design Part 1: Basicterminology, methodology.ISO/TR 12100-2:1992, Safety of machinery Basic

39、concepts, general principles for design Part 2:Technical principles and specifications.ISO 13849-1:1), Safety of machinery Safety-related parts of control systems Part 1: General principlesfor design.ISO 13850:1996, Safety of machinery Emergency stop Principles for design.ISO 13852:1996, Safety of m

40、achinery Safety distances to prevent danger zones being reached by theupper limbs.1) To be published.5 DIN EN ISO 10472-6:2009-10EN ISO 10472-6:2008 (E) ISO 14119:1), Safety of machinery Interlocking devices associated with guards Principles for designand selection.EN 574:1996, Safety of machinery T

41、wo-hand control device.EN 626-1:1994, Safety of machinery Elimination or reduction of risk to health from hazardous substancesemitted by machinery Part 1: Principles and specifications for machinery manufacturers.EN 953:1997, Safety of machinery General requirements for the design and construction o

42、f guards (fixed,movable).EN 1050:1996, Safety of machinery Risk assessment.EN 1760-1:1997, Safety machinery Pressure sensitive protective devices Part 1: General principles forthe design and testing of pressure sensing mats and floors.EN 60204-1:1992, Safety of machinery Electrical equipment of mach

43、ines Part 1: General requirements.IEC 204-1: modified3 DefinitionsFor the purposes of this part of ISO 10472, the following definitions apply:3.1ironing pressMachine for the smoothing or shaping of fabric items by pressing them between two components, at leastone of which is heated and, if required,

44、 equipped with a steaming device.3.2fusing pressMachine for the fusing of two textile layers by pressing them between two components, at least one ofwhich is heated to a temperature such that the coating of one layer becomes adhesive.3.3buckComponent of the press, covered with one or more layers of

45、textile material, upon which the fabric item islaid, positioned and prepared if necessary.NOTE The buck may be heated and equipped with a steaming and/or suction device and/or blowing device.3.4headComponent of the press which executes the required pressure by interacting with the buck.NOTE Generall

46、y the head is heated and may be equipped with a steaming and/or suction device. Heads forindustrial laundry machinery usually have a polished metallic pressing surface; those for outerwear are covered withone or more layers of textile material.3.5scissor pressIroning or fusing press whose head is mo

47、ved on a circular path or a combination of circular and linear pathsagainst a stationary buck.3.6cabinet pressMachine into which a garment is placed on a vertical buck (or former) which is moved to a position betweentwo or more vertical press heads which move horizontally to press the garment agains

48、t the buck.1) To be published.6 DIN EN ISO 10472-6:2009-10 EN ISO 10472-6:2008 (E) NOTE A cabinet press may have one or more vertical bucks which travel horizontally such that the entire equipmentmay be operated by two or more operators in concert.3.7drawer pressIroning or fusing press whose horizon

49、tal buck is moved on a horizontal linear path under the head, then thebuck (or head) is pressed against the head (or buck) on a vertical, linear path.3.8rotary pressPress in which the loading, unloading and pressing operations are assigned to different positions of themovement of a turntable carrying the bucks.3.9upstroke pressPress comprising an upper head and a lower buck, upon which the fabric item is prepared, after which theaction of the press raises the lower buck to the press head either