DIN EN ISO 10081-1-2005 Classification of dense shaped refractory products - Part 1 Alumina-silica (ISO 10081-1 2003) German version EN ISO 10081-1 2005《致密成型耐火产品的分类 第1部分 硅酸铝》.pdf

《DIN EN ISO 10081-1-2005 Classification of dense shaped refractory products - Part 1 Alumina-silica (ISO 10081-1 2003) German version EN ISO 10081-1 2005《致密成型耐火产品的分类 第1部分 硅酸铝》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 10081-1-2005 Classification of dense shaped refractory products - Part 1 Alumina-silica (ISO 10081-1 2003) German version EN ISO 10081-1 2005《致密成型耐火产品的分类 第1部分 硅酸铝》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 81.080Classification of dense shaped refractory productsPart 1: Alumina-silica(ISO 10081-1:2003)English version of DIN EN ISO 10081-1Klassifizierung dichter geformter feuerfester Erzeugnisse Teil 1: Alumina-Silika (ISO 10081-1:2003)National forewordThis standard has been published in accordance

2、with a decision taken by CEN/TC 187 to adopt, withoutalteration, International Standard ISO 10081-1 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Materialprfung(Materials Testing Standards Committee), Technical Committee Ungeformte, dichte gef

3、ormte und wrme-dmmende feuerfeste Erzeugnisse und Werkstoffe.AmendmentsThis standard differs from DIN EN 12475-1, April 1998 edition, in that the Normative references clause hasbeen deleted.Previous editionDIN EN 12475-1: 1998-04.DEUTSCHE NORM May 2005DIN EN ISO 10081-1 No part of this standard may

4、be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 6www.din.dewww.beuth.de9643916Continued overleaf.Document comprises 6 pages.08.0

5、5G4G15G70G45G22G5Supersedes DIN EN 12475-1,April 1998 edition.English versionICS 81.080Classification of dense shaped refractory productsPart 1: Alumina-silica(ISO 10081-1:2003) 2005. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN I

6、SO 10081-1:2005 EKlassifizierung dichter geformterfeuerfester Erzeugnisse Teil 1:Alumina-Silika (ISO 10081-1:2003)This European Standard was approved by CEN on 2005-02-07.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European

7、Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, G

8、erman).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Den

9、mark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.EN ISO 10081-1March 2005Management Centre: 36, rue de Stassart, B-10

10、50 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungClassification des produits rfrac-taires faonns denses Partie 1:Silice-alumine (ISO 10081-1:2003)Supersedes EN 12475-1:1998.Page 2EN ISO 10081-1:2005ForewordInternational StandardISO 10081-1:

11、2003 Classification of dense shaped refractory products Part 1: Alumina-silica,which was prepared by ISO/TC 33 Refractories of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 187 Refractory products and materials, the Secretariat of which isheld by B

12、SI, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by September 2005 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the

13、national standards organizations of thefollowing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, P

14、oland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 10081-1:2003 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 10081-1:2005Page 4EN ISO 10081-1:2005Page 5EN ISO 10081-1:2005