DIN EN 16855-1-2017 Walk-in cold rooms - Definition thermal insulation performance and test methods - Part 1 Prefabricated cold room kits German version EN 16855-1 2017《步入式冷藏间 定义 隔.pdf

《DIN EN 16855-1-2017 Walk-in cold rooms - Definition thermal insulation performance and test methods - Part 1 Prefabricated cold room kits German version EN 16855-1 2017《步入式冷藏间 定义 隔.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16855-1-2017 Walk-in cold rooms - Definition thermal insulation performance and test methods - Part 1 Prefabricated cold room kits German version EN 16855-1 2017《步入式冷藏间 定义 隔.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、May 2017 English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.130.20!%eB_“2663160www.din.deDIN

2、EN 16855-1Walkin cold rooms Definition, thermal insulation performance and test methods Part 1: Prefabricated cold room kits;English version EN 168551:2017,English translation of DIN EN 16855-1:2017-05Begehbare Khlrume Begriffe, Wrmedmmleistung und Prfverfahren Teil 1: Fertigbauteile fr Khlrume;Engl

3、ische Fassung EN 168551:2017,Englische bersetzung von DIN EN 16855-1:2017-05Chambres froides Dfinition, performances disolation thermique et mthodes dessai Partie 1: Kits de chambres froides prfabriques;Version anglaise EN 168551:2017,Traduction anglaise de DIN EN 16855-1:2017-05www.beuth.deDocument

4、 comprises 51 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.05.17 DIN EN 16855-1:2017-05 2 A comma is used as the decimal marker. National foreword This document (EN 16855-1:2017) has been prepared by Technical Committee CEN/

5、TC 44 “Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy Consumption” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was DIN-Normenausschuss Kltetechnik (DIN Standards Committee Refrigeration Technology), Working Committee NA

6、 044-00-01 AA “Safety and environment protection”. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16855-1 January 2017 ICS 97.130.20 English Version Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits Chambres froides - Dfinit

7、ion, performances d isolation thermique et mthodes d essai - Partie 1:Kits de chambres froides prfabriques Begehbare Khlrume - Begriffe, Wrmedmmleistung und Prfverfahren - Teil 1: Fertigbauteile fr Khlrume This European Standard was approved by CEN on 26 September 2016. CEN members are bound to comp

8、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

9、 Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sa

10、me status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

11、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Bru

12、ssels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16855-1:2017 E 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 Symbols and abbreviations 12 5 Performa

13、nces 12 5.1 General . 12 5.2 Thermal insulation performances . 13 5.3 Other performances 13 5.3.1 Air permeability . 13 5.3.2 Water vapour permeability 13 6 Methods to assess thermal insulation performances of prefabricated walk-in cold room components 13 6.1 General . 13 6.2 Thermal conductivity of

14、 the insulating core of wall, ceiling and floor panels . 14 6.3 Thermal transmittance of wall and ceiling panels . 15 6.4 Thermal transmittance of floor panels 15 6.4.1 General . 15 6.4.2 Test method . 16 6.4.3 Calculation method 16 6.5 Thermal conductivity of doors 16 6.6 Thermal conductivity of wi

15、ndows . 17 6.7 Thermal transmittance of corners . 17 6.8 Influence of supporting profiles . 17 6.9 Thermal bridges of the cold room 17 6.9.1 General . 17 6.9.2 Thermal bridges in doors 17 6.9.3 Thermal bridges in panel to panel joint 17 6.9.4 Thermal bridges in panel to floor joint for walk-in cold

16、rooms without insulated floor . 18 6.9.5 Thermal bridges at corner joints . 18 6.9.6 Thermal bridges of pass through holes 18 6.9.7 Thermal bridges of refrigerating units 18 7 Methods to assess thermal insulation performances of prefabricated walk-in cold room kits and total power consumption . 19 7

17、.1 General . 19 7.2 Overall heat transfer coefficient of walk-in cold room kits 19 7.3 Total power consumption of walk-in cold room. 19 8 Installation of walk-in cold rooms . 20 9 Attestation of conformity - Factory Production Control (FPC) 20 EN 16855-1:2017 (E) DIN EN 16855-1:2017-05 3 Annex A (no

18、rmative) Determination of the declared values of thermal resistance and thermal conductivity . 22 A.1 General . 22 A.2 Input data 22 A.3 Declared values . 22 Annex B (normative) Determination of the aged values of thermal resistance and thermal conductivity 24 B.1 General . 24 B.2 Sampling and condi

19、tioning . 25 B.3 Measurement of the initial value of the thermal conductivity . 25 B.4 Evaluation of the thermal conductivity value with the accelerated ageing 25 B.5 Fixed increments method 26 B.6 Declaration of the aged values of thermal resistance and thermal conductivity 28 Annex C (informative)

20、 Walk-in cold rooms documentation 30 Annex D (informative) Guide on installation . 32 D.1 General . 32 D.2 Preliminary provisions . 32 D.3 Installation, assembly and locking of panels 33 D.4 Maintenance and cleaning of the walk-in cold room . 46 Bibliography . 49 EN 16855-1:2017 (E) DIN EN 16855-1:2

21、017-05 4 European foreword This document (EN 16855-1:2017) has been prepared by Technical Committee CEN/TC 44 “Commercial and Professional Refrigerating Appliances and Systems”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either b

22、y publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be h

23、eld responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Eston

24、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 16855-1:2017

25、(E) DIN EN 16855-1:2017-05 5 Introduction The drafting of this European Standard was driven by the necessity to compare the systems placed on the market on the base of the minimum thermal insulation requirements and to establish the average level of energy consumption for a future minimum energy per

26、formance standard definition, with reference to the EU policy on increasing energy efficiency of energy related products (Directive 2009/125/EC) in the frame of the EU “20-20-20” targets. It also aims to identify the reference standards for calculation, measurement of insulation properties, to ident

27、ify the best practice rules for elimination of thermal bridges, assembly techniques and provisions to be taken in order to ensure the best level of insulation and power consumption. EN 16855-1:2017 (E) DIN EN 16855-1:2017-05 6 1 Scope This European Standard applies to prefabricated walk-in cold room

28、 kits and components. It provides test or calculation methods to assess thermal insulation performances under normal end-use conditions. Performance characteristics of walk-in cold rooms are to be assessed in terms of thermal insulating properties, in order to give a basis on which assessing energy

29、consumption related properties of walk-in cold rooms, and of their components. Performance characteristics are to be assessed for every single component of the walk-in cold room, and for the assembled walk-in cold room as a whole. The normal end-use conditions of a walk-in cold room are considered t

30、o be: installation inside an existing building; not exposed to external weather conditions. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies

31、. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12667:2001, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and med

32、ium thermal resistance EN 12939, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance EN 13162, Thermal insulation products for buildings - Factory

33、 made mineral wool (MW) products - Specification EN 13163, Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification EN 13164, Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification EN 13165

34、, Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification EN 13166, Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification EN 13167, Thermal insulation products for buildings - Factory made cellular

35、glass (CG) products - Specification EN 14509:2013, Self-supporting double skin metal faced insulating panels - Factory made products - Specifications EN ISO 6946, Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946) EN 16855-1:2017

36、(E) DIN EN 16855-1:2017-05 7 EN ISO 10077-1, Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1) EN ISO 10077-2, Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method

37、for frames (ISO 10077-2) EN ISO 10211:2007, Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211) EN ISO 14683, Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683) ISO

38、 4590, Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 walk-in cold room thermally insulated enclosure kit made of prefabricated sandwich panels

39、intended for the storage of chilled and/or frozen perishable items, accessible via at least one door, and which is large enough to let somebody walk in it 3.1.1 prefabricated walk- in cold room kits walk-in cold room kits delivered to installation sites ready for assembly without any rework of the s

40、andwich panel 3.1.2 pre-assembled walk-in cold room walk-in cold room shipped to the customer already assembled, for which no on-site assembly is required 3.1.3 prefabricated walk-in cold room with floor walk-in cold room having six insulated walls and equipped with a thermally insulated floor 3.1.4

41、 prefabricated walk-in cold room without floor walk-in cold room having five insulated walls and without a thermally insulated floor 3.1.5 walk-in cold room components elements that, when assembled together, compose a walk-in cold room Note 1 to entry: Components can be for example: panels, doors, c

42、orners. EN 16855-1:2017 (E) DIN EN 16855-1:2017-05 8 3.2 sandwich panel building product consisting of two metal faces positioned on either side of a core that is a thermally insulating material, which is firmly bonded to both faces so that the three components act compositely when under load SOURCE

43、: EN 14509:2013, definition 3.17 3.3 perimetrical profile cross section and characteristics of the perimetrical surface of the sandwich panel related to the joint system, realized with a male-female perimetrical profile, gasket perimetrical profile and camlock perimetrical profile or a combination o

44、f them or none of them 3.3.1 male-female perimetrical profile design solution that allows sealing, structural resistance, thermal insulation, correct alignment at installation 3.3.2 gasket perimetrical profile design solution that allows sealing by embedding into a sandwich panel a sealing material

45、3.3.3 camlock perimetrical profile design solution that allows sealing, structural resistance, mechanical locking between adjacent sandwich panels 3.4 overall heat transfer coefficient measure of the global insulating thermal performance of a walk-in cold room envelope, assembled with doors and all

46、ancillaries, in terms of heat flux per unit area per degree difference in temperature 3.5 mean surface area S surface area calculated by the geometric mean between the outside surface area and the inside surface area 3.6 surface heat transfer coefficient heat flux per unit area per degree difference

47、 in temperature 3.7 surface thermal resistance ratio between temperature difference and heat flux through the surface 3.8 air curtain technical equipment, producing a controlled stream of air aimed across an opening to create an air seal, that separates different environments, while allowing flow of

48、 traffic and unobstructed vision through the opening EN 16855-1:2017 (E) DIN EN 16855-1:2017-05 9 3.9 strip curtain provision, made of strips, preventing sudden heat gains, when opening doors 3.10 Types of door 3.10.1 hinged door door whose actuation takes place by means of rotation of the door leaf

49、 around the axis of rotation of the hinges 3.10.2 sliding door door whose actuation takes place by means of sliding of the door leaf parallel to the wall 3.10.3 swing door hinged door whose door leaf can rotate in both directions 3.10.4 roll shutter door whose actuation takes place by means of rolling and unrolling of the flexible door leaf 3.11 mechanical closing device mechanical device that helps self-closing of the door, and avoids door leaf to remain aj