DIN EN 16602-70-09-2015 Space product assurance - Measurements of thermo-optical properties of thermal control materials English version EN 16602-70-09 2015《航天产品保证 热控材料热光学性质的测量 英文版.pdf

《DIN EN 16602-70-09-2015 Space product assurance - Measurements of thermo-optical properties of thermal control materials English version EN 16602-70-09 2015《航天产品保证 热控材料热光学性质的测量 英文版.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16602-70-09-2015 Space product assurance - Measurements of thermo-optical properties of thermal control materials English version EN 16602-70-09 2015《航天产品保证 热控材料热光学性质的测量 英文版.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、Mai 2015DEUTSCHE NORM DIN-Normenausschuss Luft- und Raumfahrt (NL)Preisgruppe 14DIN Deutsches Institut fr Normung e. V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e. V., Berlin, gestattet.ICS 49.140!%A%z“2300287www.din.deDDIN EN 16602-7

2、0-09Raumfahrtproduktsicherung Messung der thermo-optischen Eigenschaften von Materialien zurThermalkontrolle;Englische Fassung EN 16602-70-09:2015Space product assurance Measurements of thermo-optical properties of thermal control materials;English version EN 16602-70-09:2015Assurance produit des pr

3、ojets spatiaux Mesures des proprits thermo-optiques des matriaux de contrle thermique;Version anglaise EN 16602-70-09:2015Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 30 SeitenDIN EN 16602-70-09:2015-05 2 Nationales Vorwort Dieses Dokument (EN 16602-70-09:2

4、015) wurde vom Technischen Komitee CEN/CLC/TC 5 Raumfahrt“ erarbeitet, dessen Sekretariat vom DIN (Deutschland) gehalten wird. Das zustndige deutsche Normungsgremium ist der Arbeitsausschuss NA 131-10-01 AA Interoperabilitt von Informations-, Kommunikations- und Navigationssystemen“ im DIN-Normenaus

5、schuss Luft- und Raumfahrt (NL). Dieses Dokument (EN 16602-70-09:2015) basiert auf ECSS-Q-ST-70-09C. Dieses Dokument enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 1/2004 nur die englische Originalfassung von EN 16602-70-09:2015. Dieses Dokument wurde speziell zur Behandlung von Raumfahrts

6、ystemen erarbeitet und hat daher Vorrang vor jeglicher Europischer Norm, da es denselben Anwendungsbereich hat, jedoch ber einen greren Geltungsbereich (z. B. Luft- und Raumfahrt) verfgt. DIN EN 16602-70-09:2015-05 3 Nationaler Anhang NA (informativ) Begriffe und Abkrzungen 3 Begriffe und Abkrzungen

7、 3.1 Begriffe aus anderen Normen Fr die Anwendung dieser Norm gelten die Begriffe nach ECSS-S-ST-00-01. 3.2 Fr diese Norm spezifische Begriffe 3.2.1 Absorptionsgrad Verhltnis der Intensitt des einfallenden Lichts zum durchgelassenen oder reflektierten Licht 3.2.2 Gesamtemissionsgrad () Verhltnis der

8、 Strahlungsintensitt des Probekrpers zu der eines Hohlraumstrahlers bei derselben Temperatur und unter denselben geometrischen und wellenlngenbezogenen Bedingungen ANMERKUNG Beispiele sind wie folgt: Hemisphrischer Gesamtemissionsgrad (h) Bedingungen in Bezug auf den Einfall des Lichtstroms ber eine

9、r halbkugelfrmigen Region oder in Bezug auf den entsprechenden Sichtwinkel. Normaler Gesamtemissionsgrad (n) Bedingungen in Bezug auf den Einfall des Lichtstroms im rechten Raumwinkel zum Probekrper oder einen Blick auf den Probekrper im rechten Raumwinkel. 3.2.3 solarer Absorptionsgrad () Verhltnis

10、 des durch ein Material (oder einen Krper) absorbierten solaren Strahlungsflusses zu dem auf dieses Material (diesen Krper) auffallenden solaren Strahlungsfluss ANMERKUNG Es wird zwischen zwei Verfahren unterschieden: Spektroskopisches Verfahren mithilfe eines Photospektrometers fr den Bereich von 0

11、,25 m bis 2,5 m fr die Bestimmung von s. Tragbare Einrichtung fr Relativmessungen (p), bei denen ein Xenon-Blitz zum Einsatz kommt. 3.3 Abkrzungen Es gelten die Abkrzungen in ECSS-S-ST-00-01. DIN EN 16602-70-09:2015-05 4 Leerseite EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16602-70-09 Janu

12、ary 2015 ICS 49.140 English version Space product assurance - Measurements of thermo-optical properties of thermal control materials Assurance produit des projets spatiaux - Mesures des proprits thermo-optiques des matriaux de contrle thermique Raumfahrtproduktsicherung - Messung der thermo-optische

13、n Eigenschaften von Materialien zur Thermalkontrolle This European Standard was approved by CEN on 11 October 2014. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

14、 without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member. This European Standard exists in three official versions (English, French, German). A vers

15、ion in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechn

16、ical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

17、 Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 16602-70-09:201

18、5 EEN 16602-70-09:2015 (E) 2 Table of contents Foreword 5 Introduction 6 1 Scope . 7 2 Normative references . 8 3 Terms, definitions and abbreviated terms 9 3.1 Terms defined in other standards . 9 3.2 Terms specific to the present standard . 9 3.3 Abbreviated terms. 9 4 Requirements 10 4.1 Preparat

19、ory conditions 10 4.1.1 Hazards, health and safety precautions 10 4.1.2 Preparation of samples . 10 4.1.3 Facilities 11 4.2 Selection of test methods 11 4.3 Quality assurance . 12 4.3.1 Data 12 4.3.2 Calibration . 12 4.4 Audit of measurement equipment . 12 4.4.1 General . 12 4.4.2 Audit of the syste

20、m (acceptance) 13 4.4.3 Annual regular review (maintenance) of the system 13 4.4.4 Special review . 13 Annex A (normative) Evaluation report of the measurement of thermo-optical properties of thermal control materials DRD . 14 A.1 DRD identification . 14 A.1.1 Requirement identification and source d

21、ocument 14 A.1.2 Purpose and objective . 14 A.2 Expected response . 14 A.2.1 Scope and content 14 DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 3 A.2.2 Special remaks . 14 Annex B (normative) Audit / review report for the measurement equipment of thermo-optical properties of thermal control mat

22、erials - DRD 15 B.1 DRD identification . 15 B.1.1 Requirement identification and source document 15 B.1.2 Purpose and objective . 15 B.2 Expected response . 15 B.2.1 Scope and contents 15 B.2.2 Special remarks 15 Annex C (informative) Test methods . 16 C.1 Format 16 C.2 Solar absorptance using spect

23、rometer (s) . 16 C.2.1 General . 16 C.2.2 Configuration of samples. 16 C.2.3 Test apparatus and setting up . 17 C.2.4 Test process and measurement 17 C.2.5 Calculation of absorptance 17 C.3 Comparative test method (p) . 18 C.3.1 General . 18 C.3.2 Configuration of samples. 18 C.3.3 Test apparatus an

24、d setting up . 19 C.3.4 Test process and measurement 19 C.3.5 Calculations 19 C.4 Infrared emittance using thermal test method (eh) . 20 C.4.1 General . 20 C.4.2 Configuration of samples. 20 C.4.3 Test apparatus and setting up . 20 C.4.4 Test process and measurement 20 C.4.5 Calculations of total he

25、mispherical emittance 22 C.5 Infrared emittance using IR spectrometer (eh) . 23 C.5.1 General . 23 C.5.2 Configuration of samples. 23 C.5.3 Test apparatus and setting up . 23 C.5.4 Test process and measurement 23 C.5.5 Calculation of emittance 24 C.6 Infrared emittance using portable equipment (en)

26、24 C.6.1 General . 24 DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 4 C.6.2 Configuration of samples. 24 C.6.3 Test apparatus and setting up . 25 C.6.4 Test process and measurement 25 C.6.5 Calculation of the normal emittance 25 Bibliography . 26 Figures Figure C- 1: Standard sample substrate .

27、 21 DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 5 Foreword This document (EN 16602-70-09:2015) has been prepared by Technical Committee CEN/CLC/TC 5 “Space”, the secretariat of which is held by DIN. This standard (EN 16602-70-09:2015) originates from ECSS-Q-ST-70-09C. This European Standard s

28、hall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2015, and conflicting national standards shall be withdrawn at the latest by July 2015. Attention is drawn to the possibility that some of the elements of this documen

29、t may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document has been developed to

30、cover specifically space systems and has therefore precedence over any EN covering the same scope but with a wider domain of applicability (e.g. : aerospace). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement thi

31、s European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki

32、a, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 6 Introduction The thermo-optical properties of materials are of importance to enable the calculation of the thermal housekeeping and radiative heat transfer. This Standard desc

33、ribes the methodology, instruments, equipment and samples, used to calculate the thermo-optical properties of thermal-control materials, i.e. solar absorptance s or p and the infrared emittance eh or en. In general this procedure has been written in connection with instruments and equipment availabl

34、e at ONERA, INTESPACE and ESTEC; however, any supplier is encouraged to built up his own instrument or equipment provided the accuracy of the results is equivalent to the one specified herein. In this Standard, the supplier is identified as the entity that performs the test. DIN EN 16602-70-09:2015-

35、05 EN 16602-70-09:2015 (E) 7 1 Scope This Standard describes the methodology, instruments, equipment and samples, used to calculate the thermo-optical properties of thermal-control materials. The following test methods are detailed in this Standard including the configuration of samples and calculat

36、ions: Solar absorptance using spectrometer (s) - (see Annex C.2). Comparative test method (p) - (see Annex C.3). Infrared emittance using thermal test method (eh) - (see Annex C.4). Infrared emittance using IR spectrometer (eh) - (see annex C.5). Infrared emittance using portable equipment (en) - (s

37、ee Annex C.6). This standard may be tailored for the specific characteristics and constraints of a space project in conformance with ECSS-S-ST-00. DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 8 2 Normative references The following normative documents contain provisions which, through reference

38、 in this text, constitute provisions of this ECSS Standard. For dated references, subsequent amendments to, or revisions of any of these publications do not apply. However, parties to agreements based on this ECSS Standard are encouraged to investigate the possibility of applying the most recent edi

39、tions of the normative documents indicated below. For undated references the latest edition of the publication referred to applies. EN reference Reference in text Title EN 16601-00-01 ECSS-S-ST-00-01 ECSS system Glossary of terms EN 16602-10 ECSS-Q-ST-10 Space product assurance Product assurance man

40、agement EN 16602-10-09 ECSS-Q-ST-10-09 Space product assurance Nonconformance control system EN 16602-20-07 ECSS-Q-ST-20-07 Space product assurance Quality assurance for test centres EN 16602-70-02 ECSS-Q-ST-70-02 Space product assurance Thermal vacuum outgassing test for the screening of space mate

41、rials DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 9 3 Terms, definitions and abbreviated terms 3.1 Terms defined in other standards For the purpose of this Standard, the terms and definitions from ECSS-S-ST-00-01 apply. 3.2 Terms specific to the present standard 3.2.1 absorptance ratio of the

42、 intensity of the incident light to the transmitted or reflected light 3.2.2 emittance (e) ratio of the radiant intensity of the specimen to that emitted by a black body radiator at the same temperature and under the same geometric and wavelength conditions NOTE For example: Hemispherical emittance

43、(eh) - conditions for incident or viewing of flux over a hemispherical region. Normal emittance (en) - conditions for incidence or viewing through a solid angle normal to the specimen. 3.2.3 solar absorptance () ratio of the solar radiant flux absorbed by a material (or body) to that incident upon i

44、t NOTE Differentiation is made between two methods: Spectroscopic method using a photospectrometer covering the range from 0,25 mm up to 2,5 mm for the determination of s. Portable equipment using a xenon flash for relative measurements (p). 3.3 Abbreviated terms The abbreviated terms defined in ECS

45、S-S-ST-00-01 apply. DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 10 4 Requirements 4.1 Preparatory conditions 4.1.1 Hazards, health and safety precautions a. For “Safety and security” ECSS-Q-ST-20-07C shall apply. NOTE For example, for hazard and health (safety) and for access control (securit

46、y). 4.1.2 Preparation of samples 4.1.2.1 Configuration a. The supplier shall prepare the material samples according to the process specification or manufacturers data. b. The material shall be representative of batch variance. NOTE For example: the application procedure for paint can result in diffe

47、rent thermo-optical properties, depending on the painter and the type of spray gun used. This is the reason why the samples are coated or made at the same time as the workpiece. 4.1.2.2 Cleaning a. Cleaning method and other treatment of the sample shall be the same (and not more) as for the flight h

48、ardware. NOTE In particular, solar absorptance properties are very sensitive to contamination and if the sample or the flight hardware is contaminated (even by hand grease), the test results are completely erroneous. 4.1.2.3 Handling and storage a. The supplier shall handle the samples with clean ny

49、lon or lint-free gloves. DIN EN 16602-70-09:2015-05 EN 16602-70-09:2015 (E) 11 b. The supplier shall store the samples in a cleanliness-controlled area, with a room temperature of (20 3) C and relative humidity of (55 10) %. c. The supplier shall shield coated surfaces from contact by using polyethylene or polypropylene bags or sheets. d. The supplier shall avoid mechanical damage of the sample by packing the polyethylene or polypropylene-wrapped workpieces in cl